Honestly, it was much harder than I expected. I was using a flat head screwdriver amongst other things. I am a boxer, drummer, and a pizza man by trade. I have very strong hands, wrists, and forearms and it was a job and a half for sure.
Thank you for the video. I did as in the video with zip ties. I used many zip ties for every section that I was able to put on the wheels. It make the job more easy
Thanks a lot for this great idea ! I use a big flat screwdriver and need approx 6 cable ties each side ....step by step one tie after the other...as the tire was a bit strong. But its very easy. 10 min and its done.
Excellent job. I just need to find a pry bar like the one you used instead of the screwdriver that I've been using maybe then I will be successful. I even put the tire in a hot bubble bath.
Una forma más fácil de colocar la llanta sin necesidad de herramientas, es dejar las llantas a l sol, para que el material se agua de y se metan más fácil a la rueda, así las colocó muy fácil mi hermano, con su pura fuerza, otra idea que nos dió la persona que nos vendió las llantas era ponerlas en agua hirviendo para que se aguaden y así colocarlas igual, muy fácilmente.
You can lever the old one off or some people just cut them off if they are completely worn out. It is a real struggle to get the new ones in but it can be done with strong hands, a strong lever and belief.
I use a saw and cut the old tire until the rim. Then I take a screwdriver and drill a bit. On the bottom I found small ropes...may be a old tire.... I use a sidecut to remove them. So the old tire is removed very easy.
Is it just me - but wouldn't have byen easier to remove the wheel, so that you had it on a table or workbench. I would not be able to chqnge my wheels like that anyway
No. Unless you can mount it to the table. Use of the wheelchair and the wheel brake helps with leverage anchoring the wheel while slipping on the tire. Soaking the new tire in hot water for ten minutes eases the installation- required a lot less grunt since the tire stretches more easily when heated. I am of course speaking from experience. 😅
I was thinking the same thing about using the pull ties. Neat video. Thank you. I have tires outside warming up in the sun before I start.
Thanks for the tip about warming the tires in the sun. I have a manual wheelchair and have been thinking about replacing the tires
Honestly, it was much harder than I expected. I was using a flat head screwdriver amongst other things. I am a boxer, drummer, and a pizza man by trade. I have very strong hands, wrists, and forearms and it was a job and a half for sure.
Soak the new tire in hot water for 10 minutes. This makes the tire stretch more easily over the rim of the wheel. A lot less grunt is needed then. 🙂
Thanks, finally the best method i found here
Thank you for the video. I did as in the video with zip ties. I used many zip ties for every section that I was able to put on the wheels. It make the job more easy
Well my boyfriend said I could not do the tires of the wheelchair .. we fought.. I said I could … thanks to you I won the bid 🤣🤣🤣🤣❤
Thanks, the tire wraps were the key. Flat screwdriver did the rest. The last piece wouldn’t sit well but some big pliers solved that.
I thought I bought smaller size. Thanks for the video
Thanks a lot for this great idea ! I use a big flat screwdriver and need approx 6 cable ties each side ....step by step one tie after the other...as the tire was a bit strong. But its very easy. 10 min and its done.
Did you remove the wheel from the wheelchair? Or do it like in this video.
Excellent job. I just need to find a pry bar like the one you used instead of the screwdriver that I've been using maybe then I will be successful. I even put the tire in a hot bubble bath.
Amazon, motorcycle pry bar
Thanks..so i know how to change my husband wheelchair tyre now😅
Thank you for this video. Very clear tutorial. 👍👍
Thanks! Good help! God bless you!
Bhai sahab wheelchair ka chote wheel ka rubber mil jayega kya
Where can I get your crowbar?
Una forma más fácil de colocar la llanta sin necesidad de herramientas, es dejar las llantas a l sol, para que el material se agua de y se metan más fácil a la rueda, así las colocó muy fácil mi hermano, con su pura fuerza, otra idea que nos dió la persona que nos vendió las llantas era ponerlas en agua hirviendo para que se aguaden y así colocarlas igual, muy fácilmente.
How would you remove an old solid tire?
You can lever the old one off or some people just cut them off if they are completely worn out. It is a real struggle to get the new ones in but it can be done with strong hands, a strong lever and belief.
I use a saw and cut the old tire until the rim. Then I take a screwdriver and drill a bit. On the bottom I found small ropes...may be a old tire.... I use a sidecut to remove them. So the old tire is removed very easy.
Is it safe to add heat to the tire
Yeah you can put it in a furnace 😂
請問你的工具叫什麼？可以在哪裡買？
where do you get that lever?
Use a long screwdriver flat head..
Dónde están ubicados?
Sar hamen 2 tier chahiye kese mangaye sem pis
how can i get that tool
Long screwdriver does fine.
Is it just me - but wouldn't have byen easier to remove the wheel, so that you had it on a table or workbench. I would not be able to chqnge my wheels like that anyway
No. Unless you can mount it to the table. Use of the wheelchair and the wheel brake helps with leverage anchoring the wheel while slipping on the tire. Soaking the new tire in hot water for ten minutes eases the installation- required a lot less grunt since the tire stretches more easily when heated. I am of course speaking from experience. 😅
Looks like his haven some problem s