Off the top of my head- magnetic extending pickup tool, 6ft Stanley measuring tape, fine point Sharpie, four in hand 6inch file, centerpunch, 10 inch Cresent wrench, Petzl headlight, small machinists hammer, carbide scribe. That's a great tool caddy.👍
Storage and jobsite transportation is a big part of repair and inspection work. I'm a fan of "Having it in case I need it" as opposed to "Needing it and not having it." That wheeled tote rack is a footsteps saver. Backpacks are great for small jobs. Sweet nailer, Fuel units are terrific.
Pb swiss makes super short sets I use a 7 key set m 210 m1.5 through 6mm. Best of all its under 20 dollars. The sbld does hold a mountain of stuff. I got a surge and meter in the back with a magnetic 10in by 2in metal tray from the parts store. In that is my makita sockets all just in the back. Ideally a ossilating tool and surge would be great but that's too tight. I carry my osslating tool in a milwaukee 12in x 4in zip bag they sell at hd in a 3peice set with a 2.5ho and blades on a carabiner. I have about as many tools in it as you and it's hearty for sure. It's a lazy quick bag for me vs my tech pack that's 50lbs and I loaded out the sbld with extra tools around so my main bag dosent suffer. In the back flap I carry a Plano fishing organizer 5in by 10 with wagos wire nuts screws ect. The right pocket could be less open maybe not that big gaping space. I also on the back pocket put a ripnot stainless clip(search it) for my tape measure on the back expanding flap. It really does need a non intrusive tape measure clip option. Thanks for sharing looking forward to more loadouts.
Going to have to sacrifice a nice set of Allen wrenches to make them the perfect size for what you do. I have a 2 foot1/4 Allen wrench I cut off to make the longest 1/4 Allen bit I can make to take pool cover anchors out. Same idea but smaller. I have 1/4 open end wrenches I cut off to fit in 2015+ jacuzzi load boxes to work on the heater terminals without removing the heater for small stuff
They are definitely the same size class and rough layout. If I remember right, the side pockets are also setup different and that actually makes a huge difference. They hold so much stuff in the SB-LD
Off the top of my head- magnetic extending pickup tool, 6ft Stanley measuring tape, fine point Sharpie, four in hand 6inch file, centerpunch, 10 inch Cresent wrench, Petzl headlight, small machinists hammer, carbide scribe.
That's a great tool caddy.👍
Storage and jobsite transportation is a big part of repair and inspection work. I'm a fan of "Having it in case I need it" as opposed to "Needing it and not having it." That wheeled tote rack is a footsteps saver. Backpacks are great for small jobs. Sweet nailer, Fuel units are terrific.
Pb swiss makes super short sets I use a 7 key set m 210 m1.5 through 6mm. Best of all its under 20 dollars. The sbld does hold a mountain of stuff. I got a surge and meter in the back with a magnetic 10in by 2in metal tray from the parts store. In that is my makita sockets all just in the back. Ideally a ossilating tool and surge would be great but that's too tight. I carry my osslating tool in a milwaukee 12in x 4in zip bag they sell at hd in a 3peice set with a 2.5ho and blades on a carabiner. I have about as many tools in it as you and it's hearty for sure. It's a lazy quick bag for me vs my tech pack that's 50lbs and I loaded out the sbld with extra tools around so my main bag dosent suffer. In the back flap I carry a Plano fishing organizer 5in by 10 with wagos wire nuts screws ect. The right pocket could be less open maybe not that big gaping space. I also on the back pocket put a ripnot stainless clip(search it) for my tape measure on the back expanding flap. It really does need a non intrusive tape measure clip option. Thanks for sharing looking forward to more loadouts.
Going to have to sacrifice a nice set of Allen wrenches to make them the perfect size for what you do. I have a 2 foot1/4 Allen wrench I cut off to make the longest 1/4 Allen bit I can make to take pool cover anchors out. Same idea but smaller. I have 1/4 open end wrenches I cut off to fit in 2015+ jacuzzi load boxes to work on the heater terminals without removing the heater for small stuff
IMO the MC is too small (short)
I'm running the taller MCT and the TCXL pouch as my grab bag
Works for me 👍
So far the height of the MC is livable but I am getting the MCT blackout next spring sale for sure. Love the bag but that extra height will be amazing
Say bag again! 🤣
Sorry you misspelled bayg
I got a tp lc seems similar size but without flap
Apart from the back pocket on my tp lc is much smaller
They are definitely the same size class and rough layout. If I remember right, the side pockets are also setup different and that actually makes a huge difference. They hold so much stuff in the SB-LD