Edl Cable All Samsung Frp One Click by Unlock Tool Samsung Galaxy Frp One Click No Need Test Point
HTML-код
- Опубликовано: 7 сен 2024
- #samsungfrpnewmethout
#samsngonlinebaybay
#gsmtaimurteam #software #samsungg986uandroid13frpresetdone #howtocreatsamsungedlcable #samsungmobilefrponeclickresetdone
#edlbypasssamsungfrp
Make Your Own Samsung Qualcomm EDL Mode Cable (Without Soldering!)
Ever been stuck with a Samsung phone locked out by FRP (Factory Reset Protection) or needing advanced flashing? Forget fiddling with test points and risky disassembly - this guide shows you how to build your own EDL mode cable using any old data cable!
1 (2).jpg
What is EDL Mode?
EDL (Emergency Download Mode) is a hidden state in Qualcomm-powered devices allowing low-level flashing and repair operations. This cable bypasses the usual boot sequence, letting you circumvent locks and perform tasks like FRP removal.
What You'll Need:
Old data cable: Any spare micro-USB or USB-C cable will do. Avoid cutting your primary cable!
Small, sharp object: A utility knife or craft scalpel works best.
Electrical tape: For securing the exposed wires (optional).
Let's Get Started!
1. Prepare the Cable:
Locate the middle plastic sheath: This covers the wires running through the cable.
Carefully cut a small section: Just enough to expose the colored wires inside (avoid cutting through the cable itself!).
2. Identify the Wires:
Black: This is your ground wire.
Green: This is the boot signal wire.
Other colors: Ignore these for now.
3. Connect the Wires:
Twist the exposed black and green wires together. You can wrap them with electrical tape for extra security.
4. Boot into EDL Mode:
First, connect the Modified USB Type C cable and press the Volume Down button 15 times.
And Then Reconnect Cable USB TYPE C Normal Phone Will Boot To EDL Mode.
Check in the device manager, you can see 9008 Port.
5. Unlock the FRP ( Optional ):
Use your preferred FRP unlock tool like UMT/UNLOCKTOOL. Follow the tool's instructions carefully.
Video Guide: Click Here ( Credit goes to unlock tool )
Enjoy the Benefits!
This homemade EDL cable saves you time and eliminates the risk of damaging your phone by opening it up. You can now perform various advanced tasks like FRP removal, flashing custom ROMs, and more, all without soldering or messing with
All videos on my RUclips channel are for educational purpose only and or to help people unlock their phones who forget their Password or Google Lock I do not endorse or encourage unlocking of stolen barred mobile phones. Anyone using these videos for any illegal or unlawful purpose will be solely responsible for his her activity.
Service Center:goo.gl/maps/D2...
A coffee for my work.. paypal.me/GSMT...
Follow us:
martview-forum;;;;www.martview-f...
FACEBOOK;;; www.facebook.c...
INSTAGRAM;;;;; / gsmtaimurteam
If my channel help you unlock password Google account from your phone than be sure to Subscribe to my RUclips channel. This is very important for us RUclipsrs
I HOPE YOU LIKE IT
i hope you guys are enjoying my content and if you are enjoying my channel then please subscribe my channel for more useful videos...
subscribe my channel / @gsmtaimurteam
FACEBOOK::: / taimur.ahmad
...
TWITTER:::
GsmTaimurSUBSCRIBE | LIKE | SHARE | AND COMMENTS
Mil gracias amigo me funcionó. Gracias por compartir su inteligencia
w
thanxxxx muchhh bro....working 101%
Welcome 👍
100% working method dear sir
Enjoy
THANKS YOU brother, it works 👍
You're welcome!
Edl Cable All Samsung FRP with Unlock Tool is very great and fast
yes
work beautiful ❤
THANKS
Error !!!
It seems we couldn't find an exactly fitting programmer for your device. We've listed all of our programmers that might work for You. Please select one from the list below.
Markings in the list show if you've selected a programmer previously or not.❤❤❤❤❤❤❤❤❤
not
Thanku bro Done 💯✅ sm a23 5g.(SM A236E) DONE FRP
Welcome 👍
Thanks works great. Note 10+
Enjoy it
Please brother, the cable which you make must be connected to the computer first ?
4. Boot into EDL Mode:
First, connect the Modified USB Type C cable and press the Volume Down button 15 times.
And Then Reconnect Cable USB TYPE C Normal Phone Will Boot To EDL Mode.
Check in the device manager, you can see 9008 Port.
thanks u so much its work
welcome
But should it work on galaxy s21 fe 5g and is it safe if these two wires are connected all time because most edl cables have button. And also if i enter edl mode does these two wires must stay joined, or its not important after it sucessfuly reaches edl mode. And is it safe for exynos, because i cant check my chipset in frp mode
sty joins
Is possible to use your method to bypass the phone sequence lock and not loose the data in the phone ? Thanks
data loss
Thanks boss
Welcome
ilove you broo
wellcome
it works !
yes
I can only found 2 wires, red en black, in my usbc/usb cable. What kind of cable do you use?
how many wires your cable
tnx brother work 1000/1000
welcome
good bro
yes plz
I have samsung m23 hardbricked i want to flash using edl mode but dont know any tool compitable with it Help plz😢and yes i have samsung firmware with ap csc bl file not firehouse. Hex or. Md5 can you plz help it will be great
WhatsApp me i can try to fix
Not all samsung Qualcomm only
ONLY SAMSUNG QUALCOM
@@gsmtaimurteam، but you wrote all samsung!!
@@lala15531 yes working all Samsung qulcm cpu
@gsmtaimurteam The video title must be edited , because you wrote all samsung.
can i repair the imei on my s23 ultra with this software i bought a edl cable
yes
android 14 always failed ok .....
model and bit
Bit matlab@@gsmtaimurteam
I have samsung m52 5G is have frp unlock work or not ?
bit ???
thaks sir
welcome
Thanks, it's paid (unloock tool), isn't there any alternative software that's free?
you need free software. ?????
Is it safe if i plug in in exynos phone because i cant get my cpu information in frp locked phone. Would it harm exynos, or just wont work? I dont know is exynos or snapdragon
your mobile phone model
@@gsmtaimurteam I already tried, galaxy s21 fe 5g, i was able to get in edl. But you still cant do nothing because loaders for these new phones are also not free😔
i have sm-g981u (S20 5g snapdragon). i can already get into "Download mode" by shutting phone off. hold Volume UP + Volume Down and connect Type C cable at same time. the other end of the cable is connected to pc already. why do i need an EDL cable if i can already get into EDL/Download mode?
1. Prepare the Cable:
Locate the middle plastic sheath: This covers the wires running through the cable.
Carefully cut a small section: Just enough to expose the colored wires inside (avoid cutting through the cable itself!).
2. Identify the Wires:
Black: This is your ground wire.
Green: This is the boot signal wire.
Other colors: Ignore these for now.
3. Connect the Wires:
Twist the exposed black and green wires together. You can wrap them with electrical tape for extra security.
4. Boot into EDL Mode:
First, connect the Modified USB Type C cable and press the Volume Down button 15 times.
And Then Reconnect Cable USB TYPE C Normal Phone Will Boot To EDL Mode.
Check in the device manager, you can see 9008 Port.
5. Unlock the FRP ( Optional ):
Use your preferred FRP unlock tool like UMT/UNLOCKTOOL. Follow the tool's instructions carefully.
frp remove ? only Jtag work
no bro change port or usb cable done@@Cataljn
@@gsmtaimurteam not work!!!
edl cable pic@@Cataljn
what about the Samsung A715f? I don't find that type in the tab
which bit ??/
@@gsmtaimurteam Bit B
How to make the cable
ok w8 i,m upload video
Hello bro if the cable does not have black wires then which color to used
org
i have this software i jst dont know how to repair the imei on s23 ultra with the edl cable can you help me if we succeed i will buy u large coffee many thanks
s23 ultra software model
@@gsmtaimurteamBinary 3
Exynos me edl cable work krta hain kya and edl cable se adb enable hota hai?
nhi bahi ya sarf qualcomm cpu par kam kary gi
Please tell me I can do this on Samsungsamsung galaxy fe 20 sm-g780f
try same if not working give me android nersion
@@gsmtaimurteam One Ul version
5.1
Android version
13
Android 13 one ui rersion 5.1
sm-g781b S20 FE CAN BE DONE BY THIS METHOD ?
android and bit
Working on S21 5g SM-G991U 30 July 2024
YES
Does this work with exynos ?
no exynos cpu only chimera pro
A13 and work with TFT unloc????
yes
Brader s23 ultra always failed writing flash program , sahara image load firehouse ............ Tnx
Let me check
and plz change usb port
can you use data cable
modified cabe
Where can I get one
@@allanwambia7913 open cable short green and black wire
I get USB not recognized on laptop
change port
Only samsung or poco mi brands work thant idea
only Smasung
Will this work for s21 plus 5g
yes
Bhai mera n950u wrong flashing k baad dead hogya ha please koi solution bta do
support.halabtech.com/index.php?a=downloads&b=folder&id=30876
its work nova 9
only Samsung
for any security??
yes, any security??
For me not working , no enter in edl mode , just charging…
model
Doesn't work for s21 for G991w
yes, i have done.
👌🤣🤣😂😂nice
thanks
Why there is resistors connected ?
2. Identify the Wires:
Black: This is your ground wire.
Green: This is the boot signal wire.
Other colors: Ignore these for now.
3. Connect the Wires:
Twist the exposed black and green wires together. You can wrap them with electrical tape for extra security.
I THINK U DID NOT GET MY POINT , WHAT I AM SAYING IS (10K RESISTOR USED) IN EDL CABLE OR NOT@@gsmtaimurteam
❤❤❤
Thanks
Hello bro if the cable does not black wires then which color to used
Please help
Exynos working bro?
ONLY QUALCOMM CPU WORK THIS METHOUD
All cpu types
Only qclom
After ftp reset mobile dead sulation in next video
No dead problems bro also working
Android 14 not work
model
A05s
yes
Sahara Unknow Comman bro ??
model
@@gsmtaimurteam G991u1
@@gsmtaimurteams911b s23
Bro, I got the same error as you... what do I do next??
[EDL] ERASE FRP Selected Model : Samsung Galaxy S20 FE 5G
Code Name : SM-G781B, SM-G781B/DS
Operation : Erase FRP [1]
Authenticating... OK
Retrieving data... OK [367,8 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM5
Connecting to device... OK
Writing flash programmer... FAIL
[Sahara] Unknown command!
Trying to connect to FIREHOSE Mode!
Connecting to flash programmer... FAIL
Waiting for response timeout!
UNLOCKTOOL 2024.01.05.0
Elapsed time : 29 seconds
Bro plz check your cable and change port
@@gsmtaimurteam I changed the usb cable and the usb port... it gives me the same error brother...
same problem heelp@@Cataljn
same problem bro @@gsmtaimurteam
@@josuecruzmartinez6604 jtag
???????
its worked perfect
ok thanks@@jiji-cf1iu
Enters download mode.🤷🏻♂️
no edl mode
ممتاز _احسنت 👍100%
thanks
Helló. Samsung Tab S9 ultra android 14?
cpu ????
@@gsmtaimurteam Model SM-X916B CPU Qualcomm Snapdragon 8 gen ❤️
❤❤❤
thanks