Great video! I’m getting ready to change out my pcv valve and hose and your advice and instructions were way better than the Haynes manual. Thanks man.
HI: Thanks this was a big help. I was having trouble finding the PVC, makes me feel stupid. 23mm fits but I had to get a deep socket, my standard 23mm didn't have enough clearance. I was able to pull the PVC ok with only taking out the battery and air breather assembly.
From a DIY perspective, the Duratec 3.0L is a mess of an engine. From Ford's business perspective, its a work of genius. They REALLY dont want you working on this thing and have designed it to be a headache and take it to their service shop. The Vulcan was such a dream to work on and they knew it.
Just fixed this problem on my 2004 escape. I ended up replacing sections of the hose with reinforce heater hose. Listen for the sucking noise it's a dead give away that you need to replace it.
Ron b that’s exactly what’s going on with mine. Check engine light came on. Autozone personnel ran the codes and it showed my O2 sensors were bad, so I replaced them. The light was still on, so I cleaned my mass airflow sensor, light was still on. Filled my oil and coolant back up just because, and that’s when I stated hearing all the sucking noise that you’re talking about.
Do you know where the coolant temperature sensor is on this exact vehicle? Is it under the throttle body about 8 inches to the right? If you're looking at it from the driver's side.
Jamie, can you tell me what year escape that is? Ny wife has 2010 escape limited 3.0 and its going thru oil pretty fast . Did an oil change almost a month ago and the oil light came on. Less than 1000 miles I think. Original pcv @ 115000 miles
dave3825us have you checked your oil pan gasket? Im assuming you checked the levels by the dipstick and oiled the rubber seal on the oil filter when you replaced it.
hay i need help on 2001 ford escape ... had to take all vacum lines off but was never done right to begen with ,dont know how to read the schematics. can you show where lines go please...
Trevor Street Did you find your problem about your escape i have the same problem with mine... Contact me maybe we can help each other olivier954@hotmail.com
If you want to see a prime example of Ford evap WTF, base model 4.6 L Modular V8 95 T-Bird. Outside of the regular polyester/rubber hose nonsense, you also get these brittle hard plastic "straws". It's no wonder you rarely ever see 95 T-Birds and Lincoln MK VIII on the road anymore.
Great video! I’m getting ready to change out my pcv valve and hose and your advice and instructions were way better than the Haynes manual. Thanks man.
HI: Thanks this was a big help. I was having trouble finding the PVC, makes me feel stupid. 23mm fits but I had to get a deep socket, my standard 23mm didn't have enough clearance. I was able to pull the PVC ok with only taking out the battery and air breather assembly.
From a DIY perspective, the Duratec 3.0L is a mess of an engine. From Ford's business perspective, its a work of genius.
They REALLY dont want you working on this thing and have designed it to be a headache and take it to their service shop. The Vulcan was such a dream to work on and they knew it.
Just fixed this problem on my 2004 escape. I ended up replacing sections of the hose with reinforce heater hose. Listen for the sucking noise it's a dead give away that you need to replace it.
Ron b that’s exactly what’s going on with mine. Check engine light came on. Autozone personnel ran the codes and it showed my O2 sensors were bad, so I replaced them. The light was still on, so I cleaned my mass airflow sensor, light was still on. Filled my oil and coolant back up just because, and that’s when I stated hearing all the sucking noise that you’re talking about.
Thanks man. I have threw everything but the kitchen sink on my sons escape. I think you solved my problem
thanks for this! im having a bad idle and researching everything that may be causing it,
yes yes and yes lol , they are always a problem good luck
John Meister Dupa did you replace the Pcv Valve? Your car still have a rough idle?
Change the manifold gaskets.
perfect - good job, exactly whats wrong with mine...
What causes the line to collapse pvc line
Is there an aftermarket pcv hose replacement? Or is there a way to modify one to make it work. What about I modify a stove gas line? ^_^
Where can I get the gasket for the oil SEPERATOR? Part stores can't seem to find it. And I can't find it I line. Mine is torn in half
So I have a 2001 Ford Escape Xls 24v pcv valve. I don't know much about cars but I'm trying to find help so I don't destroy mines 😅🙏🏾
Do you know where the coolant temperature sensor is on this exact vehicle? Is it under the throttle body about 8 inches to the right? If you're looking at it from the driver's side.
Christopher White Haynes manual doesn’t tell you where it is lol. It just tells you what to do
Great video....thanks
Jamie, can you tell me what year escape that is? Ny wife has 2010 escape limited 3.0 and its going thru oil pretty fast . Did an oil change almost a month ago and the oil light came on. Less than 1000 miles I think. Original pcv @ 115000 miles
dave3825us have you checked your oil pan gasket? Im assuming you checked the levels by the dipstick and oiled the rubber seal on the oil filter when you replaced it.
What year is this escape???????
hay i need help on 2001 ford escape ... had to take all vacum lines off but was never done right to begen with ,dont know how to read the schematics. can you show where lines go please...
Lol, this is my same damn project! Hahahah love these vehicles
How did you get the wire harness from underneath the uper engine mount?
Good show. Thanks.
I have a 2001 escape have a low idle
I have 02 ford escape that now sounds like a go kart is it spark plugs
what size socket for the pcv valve? that wouldve been a great tip! ;)
23mm
He meantions it in the video ? As a 23.
2 others already asked, but unless I'm missing it, you never replied. What year Escape is this ?
Cash Bailey 2001-2007
the pcv evacuates blowby.
Would a bad pcv cause me to only get 260 km out of a full tank ?
Travor Street. Did you find out what the problem was? I have a similar problem with my ford escape.
Trevor Street
Did you find your problem about your escape i have the same problem with mine... Contact me maybe we can help each other
olivier954@hotmail.com
I asked someone at AutoZone and yeah your gas mileage will tank.
If you want to see a prime example of Ford evap WTF, base model 4.6 L Modular V8 95 T-Bird. Outside of the regular polyester/rubber hose nonsense, you also get these brittle hard plastic "straws". It's no wonder you rarely ever see 95 T-Birds and Lincoln MK VIII on the road anymore.