Holy crap this was my problem EXACTLY. Tried oiling and messing with the spring tension, did not help. Both beaters insanely stiff. For a second I thought I had to break it in or something. THANK YOU!
Just got the Double pedal Demon Drive and had the exact same issue with the slave pedal assembly. Tried all the settings and gigged 2x struggling with it until I came across your video. Thank you so much for the video and the fix!! I adjusted the linkage in just a little and boom it’s perfect now! I let my rep at Sweetwater know about the fix too. Thanks again!!! Also I actually gave a little heat to the set screws with my soldering iron prior to loosening the screws. Made it easier!
Awesome man! Happy you got it straightened out! I appreciate you spreading the word. Maybe Pearl drums will finally see the video and fix it! Haha Rock on!
There is another bearing at the bottom of the drive. Unscrew the allen bolt and remove the metal washer. Then you can line it up so it wouldn't be crooked. Tighten everything back up and it'll move like the left one.🙌🏾💪🏾
Yup mine too what i did is loosen the two screws and while loose tap the pedal the shaft will move straigt to where is supposed to be by it self the tighten and go play fast
I got new ones about a year ago & they were sloppier [out of the box] than ones I replaced. And to this day I haven't been able to figure out where the problem is
Wow! I'm having the same problem with my NEW Pearl DEMON XR The right Pedal is hard as hell to push. I can't seem to get a double out. it feels like something is wrong with it. I'll try your method.
Hey guys! I love the camaraderie we’ve built in the comments! Us drummers gotta have eachother backs! Going to selfishly use this time to promote my new record! Check out the page for updates! Just posted the first single, full album coming in a few more weeks! Rock on! 🤘
I haven't checked your resolution yet, but there's an issue with my pedal after converting to the long board setting. Left one is great (using a double pedal). Right one stops dead after 1 or 2 bounces. To me it sounds like there's friction in the base of the pedal and kept thinking something's wrong with the alignment of the screws I had to move to convert it. Does anyone have any idea or ran into this as well?
It's insane to notice that in a 25k comments, I haven't seen any reply on mention from Pearl. Pitty! I was about to buy these, I'm just too concerned at this point.
Видеоклипы
Was feeling pretty defeated with my demon drive. This improved it drastically. Thanks for posting this. You’re a hero.
Anytime man! Rock on!
Holy crap this was my problem EXACTLY. Tried oiling and messing with the spring tension, did not help. Both beaters insanely stiff. For a second I thought I had to break it in or something. THANK YOU!
Anytime man, rock on!!
DUDE YOUR A LIFE SAVER!! I was about to buy a new drum shaft or even a new pedal and you just fixed it thank you so much
Anytime man! Rock on!
I love you man! I’ve had my pedals for 4 years now and after adjusting that link they work better than the day I bought them! 😅
Glad I can help man!!!
Just got the Double pedal Demon Drive and had the exact same issue with the slave pedal assembly. Tried all the settings and gigged 2x struggling with it until I came across your video. Thank you so much for the video and the fix!! I adjusted the linkage in just a little and boom it’s perfect now! I let my rep at Sweetwater know about the fix too. Thanks again!!! Also I actually gave a little heat to the set screws with my soldering iron prior to loosening the screws. Made it easier!
Awesome man! Happy you got it straightened out! I appreciate you spreading the word. Maybe Pearl drums will finally see the video and fix it! Haha Rock on!
Thank you. I couldn’t get mine loose. I needed to use pliers to turn the key and there was a loud crack due to how tight they were
Glad you got it fixed man! Rock on!
Thank god i found this vid
Glad I can help, Rock on!
Thank you! Pearl company needs to see your video, and include your directions in the owner's manual.
Glad it was helpful!
There is another bearing at the bottom of the drive. Unscrew the allen bolt and remove the metal washer. Then you can line it up so it wouldn't be crooked. Tighten everything back up and it'll move like the left one.🙌🏾💪🏾
Great tip!! Rock on! 🤘
Yup mine too what i did is loosen the two screws and while loose tap the pedal the shaft will move straigt to where is supposed to be by it self the tighten and go play fast
Absolutely brother. Now time to let em rip! Rock on!
I got new ones about a year ago & they were sloppier [out of the box] than ones I replaced. And to this day I haven't been able to figure out where the problem is
Unfortunately sometimes the quality just isn’t there these days. Thats across the board too man. We do what we can, rock on!
Wow! I'm having the same problem with my NEW Pearl DEMON XR The right Pedal is hard as hell to push. I can't seem to get a double out. it feels like something is wrong with it. I'll try your method.
Keep us posted on how it works with the new model! Hopefully one day Pearl will see my video and respond! Rock on! 🤘
Thanks from Brasil!
Rock on!
These are well out of my price range, but I'm sure this can be applied to other pedals.
Thanks.
Absolutely! Rock on! 🤘
I have the same problem. Now that you've shown what the issue is, now i cant find the allen wrench that came with it🤦🏾♂️...
Hardware store should sell a small pack! Rock on! 🤘
I tried mine wouldn't align easily think the company could do a better job designing the pedal.
Maybe one day they will see this video and respond to me!
i have this issu thanks so much ♥
Hey guys! I love the camaraderie we’ve built in the comments! Us drummers gotta have eachother backs!
Going to selfishly use this time to promote my new record! Check out the page for updates! Just posted the first single, full album coming in a few more weeks! Rock on! 🤘
Holy shit... this might change my life
Hell yeah! Rock on! 🤘
I haven't checked your resolution yet, but there's an issue with my pedal after converting to the long board setting. Left one is great (using a double pedal). Right one stops dead after 1 or 2 bounces. To me it sounds like there's friction in the base of the pedal and kept thinking something's wrong with the alignment of the screws I had to move to convert it.
Does anyone have any idea or ran into this as well?
Check out what I speak to in the video.c but also double check all your tension settings, make sure nothing came loose when converting!
It's insane to notice that in a 25k comments, I haven't seen any reply on mention from Pearl. Pitty! I was about to buy these, I'm just too concerned at this point.
Right?!? You’d think by now they’d at least say something! Rock on man! 🤘
I get mine for second then even just changing the spring tension causes my main pedal to go completely out of alignment.
Keep adjusting!
So? How does that effect the playing.
Makes it much better! Much more smooth!
These pedals are cheap garbage.
The Tama Dyna syncs are waaaay better
I hear great things about those pedals! Rock on man! 🤘
@jerrettscott_official4955 Yeah I had them and sold them within 3 weeks.
Tama stuff is just better.