How To Make A Simple Auger Wood Chipper Using Drill Machine | Diy Screw Wood Chipper Build | DIY
HTML-код
- Опубликовано: 7 фев 2025
- How To Make A Simple Auger Wood Chipper Using Drill Machine | Diy Screw Wood Chipper Build | DIY
Hello Everyone!
Today I show you how to make a simple auger wood chipper using drill machine. This homemade wood chipper has auger, screw type cutting blade. I used four metal round disc to make the auger, screw then I welded this spiral blade to a 20mm shaft to make the wood chipper mechanism. This diy wood chipper mechanism is rotated by the drill machine through the chain drive. I step down the drill machine speed by using the sprockets and chain to multiply the torque for this diy wood chipper machine. I also attached a flywheel to this diy homemade screw wood chipper machine. This flywheel is used to provide continuous rotation to this diy homemade auger wood chipper machine. This homemade wood chipper is very simple to make. This diy wood chipper is very powerful. This homemade wood chipper cuts the wood very fastly. This drill hack works good. I hope you guys will enjoy this making of wood chipper build.
Click here to SUBSCRIBE Diamleon Diy Builds:
/ diamleondiybuilds
Support me on PATREON:
/ diamleondiybuilds
Social Media:
Facebook: / diamleondiybuilds
Instagram: / diamleondiybuilds
Twitter: / diamleondiy
Contact Mail Id:
diamleondiybuilds@gmail.com
Thanks for watching
Hit LIKE & SUBSCRIBE button
#diamleondiybuilds
#woodchipper
#homemadetools
Very clever and well built. Based on the sound of the drill motor, it sounds as if a larger (more powerful) one is needed.
Thank you❤
Дитяча іграшка. Таким лише бузину й кришити!
Для кропиви поросятам))
дрель жалко. туды надо более тяговитый движок ставить, а так... вы правы, игрушка ;)
Ідею вам показали, як із дуже незначними затратами одержати чудову річ. Ну а далі підключаєте до трактора і можете пхати хоч рельсу.
I think that mounting the solid flywheel onto the shaft first, then put the sprocket on the outside would protect the chain from wood chips better. Neat idea. Seems to work really well. A battery power drill could be used in remote locations for small chipping jobs. NIce job!
Thank you very much for your suggestion sir.
Beautifully done mister good job
Thank you very much dear
Ingenious way to make your own super-duty auger flighting!
Thank you very much! 😊
Это классная вещь!в хозяйстве пригодица
OMFG its a Magnificent piece of machinery !!!!!!! EXCELLENT !!!!! Thank You
Thank you❤
Доброго дня. При всём уважении, но я думаю стоило добавить натяжитель цепи. А еще замечу, что дрель очень сильно напрягается в момент, когда рубятся деревяшки. Мне кажется после интенсивной работы мотор перегреется. Все таки для таких работ нужен хороший крутящий момент.
Thanks for your feedback bro
Where your country
I'm from India bro
Это не деревяшки, а стебли. Похоже от подсолнуха, ил что то в этом роде.
Muy buena todas las ideas que nos da.
Pondré en práctica algunas de ellas.
Ok thank you very much friend
The Gutenberg press spread the human knowledge to new heights. Now you are spreading amazing knowledge worldwide at breathtaking speed. Thanks.
Wow, thanks
Great build... and thanks for running a bunch of sticks through it so we all know it actually works, instead of just one piece. great concept. As a side note. most of the time, when there are comments in russian, (cyrillic?) spanish etc. I have the option in youtube to translate so i can read the comments in english. I dont have that here. Any idea why?
Thank you very much dear ❤
I didn't have the option to translate until after I logged into an account.
hello thank you for your video much courage to you. can you also make the machine to press peanut oil? THANKS
Thank you very much dear
What you are looking for is a screw press, the difference is the flights of the auger get closer and closer together, and sometimes smaller in diameter like a cone shape or Victorio Strainer. In this cutter, you ideally want them spaced evenly apart.
They make a handcrank oil press for 100 bucks that is made of food grade Stainless, that would better suit your purposes,.
Молодца,Прошка!
Thank you❤
оригинально 😁
Would make a good silage, chopper. How would it do with branches that weren't straight?
What about branches with branches?
The ideal feed angle is around 30 degrees, so it pulls in the branches, and can cut larger things. The ideal shaft speed is around 60rpm. The other issue is usually you want a stinger or blade sticking out at the end or else when it wears at the rear, it doesn't cut quite all the way through. IF you poke around, you will see similar designs, but not with a drill usually around a 5hp engine, or 1-2hp motor and thicker flights or cutters. If I was going to do silage, I would go for a larger motor, that is rated for continuous duty. Most drills will overheat.
@madflower8723 thank you my friend !
Thanks bro , you are the best and give me a good conception !
Thank you very much 😃
Молодец.
Thanks man
Отличная работа❤Просто,быстро и умно.Щепу можно высушить и в мешки,а зимой топить ей
дрель жалко. туды надо более тяговитый движок ставить
@@ОлегЮтуу него много самоделок под эту дрель.Интересно,а если винт из отрезных алмазных по бетону сделать,прочнее будет
@@olegpoheretski190 интересно, почему топоров не делают с алмазным напылением? ;)
@@ОлегЮту :)))))дорого,да и кому вечный топор нужен?!
Сомневаюсь, толщина малая, вот насчёт дисков обороны я подумал🤔🤔🤔@@olegpoheretski190
sangat membantu.. alat yang sanga keren😊🇮🇩
Thank you very much dear
Beautiful !
Thank you very much❤👍
Impressive
Thank you bro
You can improve the design by adding a duct that collectes the chipped wood pieces.
Ok thank you very much for your suggestion
Hello my friend❤Your video is amazing!💐 Content that inspires and motivates many people!🌹 Keep uploading good videos!💮Good luck and good mood👍❤❤❤
Thank you very much friend
Boa ideia
Thank you❤
What size steel is the auger blades
Great man ❤
Thanks dude
How thick is that metal thank you
great
Thank you❤
Maybe need a plate with a hole, to prevent the machine could catch your hand.
Thanks for your suggestion👍
pretty cool but that drill motor is not going to last. An electric motor of say 1/4 to 1/2 hp would be a better choice.
An induction motor is far less noisy.
изделие толково! но говорят стебли набирают много вредных металлов...!???!
The author did his best and it came out well. the design is interesting, but the test video is a failure. the Sambucus barrels are very weak for a real test. but the idea and execution is great, I would rate it as 9/10.
He needs about a 30 degree angle for the feeder. It looks like he only has about 15. It is really based on countless other shredders but getting it to work with a drill is pretty impressive. He could have used thicker blade material as well but getting them stretched is harder.
Гарна ідея
How did you intend on stopping it if you got caught up?
Гений!!!
Thanks man
I'll have to say I think you could build a real chipper shredder
Why no guard
No OSH in Russia
Muito incrível este seu trabalho parabéns ❤❤❤❤❤❤😊😊😊😊😊😊
Thanks man❤
cea mai buna solutie pentru un tocator de crengi !bravo!
Thank you❤❤❤❤
😅поставь дрель-миксер от0до900об, и будет класс! моё мнение!
Thanks for your suggestion bro❤
Зачем вся эта конструкция?
Сахарный тростник 😂😂😂
Good! But you can improve!
Thanks man
Были просто палки а теперь куча мусора оч.круто.
hello
Hi bro
А если прутья с веткамт? 😭
Бузину 😂😂😂
What do you do with the chips? You're chipping good firewood. Now make a machine that will make wood branches out of the chips.
No reincarnation. When we die, our mortal body desintegrates, but our souls and spirit go to God. If we received Jesus we will be like the angels. If not receive Jesus...to the Hades and later ti the eternal fire lake. Wood chips cannot return to branches, but we can be transformed after our body death.
Chips for heating are really popular in europe/russia, etc. They make furnaces that use them instead of cordwood like we use in NA. Actually the first design I talked someone into making was from Costa Rica about 15 years ago for using in a wood gasifier.
Дрели на пару тройку палок хватит. Валу, а дальше двигателю в целом кырдык однозначно!
the next project is an ice cream maker, right king?
Bravo majstore
Thanks man
Absolutely wrong wrong wronggggggggggggggggggggggggggggg
штука классная но ненужная...
Бедная дрель