CM Dual Speed Chipping Shredder - Whole Tires to 1" Chips for Fuel In one Step.

The CM Dual Speed Tire Shredding System is supplied as a complete turnkey unit. These machines are the most versatile machines in the industry and unlike any other shredders, CM Dual Speed Chipping Shredders come as a turnkey package and include in-feed conveyor, discharge conveyor, sub frame and platforms as well as a control panel with PLC Controls. All systems are prewired and tested at the factory. This unique feature allows systems to be set up and commissioned in the field quickly.
It utilizes flat rubber belt type conveyors to feed material to it and trough roller conveyors to convey properly sized chips away from it. Emergency stop buttons are located in key areas around the system.
CM Dual Speed Shredders are capable of processing steel belted car, SUV and truck tires up to tire sizes with an 22.5" (572mm) inch rim. The shredder has two speeds; 22 rpm for passenger and SUV tires and 11 rpm for large semi-tractor trailer tires. It can process whole tires in a single step while producing consistently sized tire chips for Tire Derived Aggregates (TDA), Tire Derived Fuels (TDF,)
Configurations / Turnkey Features
CM Shredders utilize a patented internal screen and patented recirculation conveyor drum that work in combination to remove acceptable sized chips from the system and recirculate oversize pieces to the shredder for additional processing. This unique design allows the system to operate on a very small platform which drastically reduces the space required for the system.
The internal screen can be easily changed to allow end product sizes to vary from rough shred for landfill to chip for Tire Derived Aggregates or for Tire Derived Fuel.
CM’s patented disc screening system can be easily rolled back for servicing and in addition, the chip size can be changed by removing one unit and replacing it with a different size unit. This allows the CM chipping shredder to be highly versatile in the marketplace.
Total Cost of Operation and Ownership / Knife Highlights:
CM Chipping Shredders are the industry leader for processing whole tires to chips. CM's patented “Multi-Stack” and “Double-Stack” knife technology allows it to process more tires at lower costs then competitive systems. The CM knife technology utilizes replaceable knife inserts that are made of through hardened tool steel.
These knives can be repositioned, reground and reused up to 3 times in the shredder. This patented feature also uses the closest knife to knife tolerances possible which allows the system to produce the cleanest cut chips with the least exposed wire.
The cost of knives and the associated costs with knife changes is the leading cost driver to operating a shredder. CM’s replaceable knife systems run longer between knife changes, take less time to change and cost less to replace.
These systems provide the least cost of ownership of any shredder on the market. Tire chips that are cleanly cut with very little exposed steel are critical to the efficiency of the system and when producing saleable tire chips for markets.
Maintenance & Service
Grease manifolds are located on the back of the disc screen and near the operator’s station for ease of maintenance. CM also provides detailed maintenance procedures in the operation and maintenance manual included with the shredder.
CM Shredders has been building equipment specifically for shredding and recycling tires since 1982. Since its inception CM has built and installed over 400 machines located on 5 continents in over 27 countries. All systems are designed, built and serviced from our Sarasota, Florida manufacturing facility in the U.S.A.
Our machines process over 500 million tires annually around the world. For over the past 38 years CM has developed numerous innovations in cutting and screen technologies and has been awarded numerous patents for these advanced designs.
At CM we know it takes more than just building the best equipment. We work one on one with every customer to develop and create solid working solutions that will best serve their volume and markets.
As a team, we provide industry education, training, technical and engineering support, networking avenues and straight up honest answers to all your questions to be sure that the equipment fits the job and supports your business model to achieve the highest production and lowest cost of operation.

[@iamyourfather5954]

How much does a start up machine cost and how do you ship it

[@CMShredders]

Hi there, our industrial shredders vary depending on the type of shredding you are doing and the volume. Please visit www.cmshredders.com to learn more or contact us for a quote.

[@janbevelsborg]

This perfect shredder works even better if you feed it with the db technologies tyre feeding system. We have seen capacities of 25t/h achieved by the CM, just achieved by proper feeding

[@CMShredders]

Proper feeding is key!