Awesome stuff man! I have never handled a single one of these. But my 2 favorites are also the BBM and the Roosevelt. Flunky made the BBM my absolute grail 3 years ago and nothing has changed!
I need 5 box's with pre cut foam like you have for my folders but I'm not wanting to pay ridiculous prices for that, are there any similar but cost effective options?
Nick, my goodness, what an amazing collection you've acquired. Thank you so much for sharing it with us and for all you do to support this great knife community! I've begun to amass a nice collection myself, though I'm not quite ready to venture into the $400+ realm. I suspect someday soon, though, as I'm looking to "thin the herd" myself and begin investing in some higher-end pieces! You've given me some ideas to pursue.
I would be interested in the Hinderer XM-18 harpoon spanto slim if you choose to sell it, as I currently have no Hinderers in my collection I am in the market for a couple two-tree of them lol.
Just a heads up: I would advise against trading the Neon Lite for a Neon Zero. I’ve had both, a few versions of the Zero and I’ve stuck with the Lite. Unless you’re planning on moving up to a Custom Division, the Zero has a way stiffer pocket clip and most suffer from deathlock, at l least when new. Even once broken in you still have to watch where you put your fingers to stay clear of the lockbar. I love them all and would encourage you to get them all, but I would get rid of the Lite to get it. At least see if you can try one out first, just to be sure. Good luck with it, sir! Love your videos! 🙏🏼🙏🏼🙏🏼👊🏻
Awesome collection, looking forward to the rest of them and thx for sharing them with us. When you do your knife sale could you do it on RUclips because I’m not on Instagram… Thx again 👍🏼
Dude, UH MAZING collection. If you EVER get rid of one of those CKFs I will pay a ridiculous amount for either one. Like take my money🤲💵. That and a custom Strider are my two dream knives. Unfortunately I can’t get my hands on either lol
It's not strong/stiff enough, at least not at any realistic folding knife thickness. Not saying someone won't eventually make one, just that it would be extraordinarily dumb to buy one.
I love to see any vid you put out no matter the length. I got a knife mod question. I'm trying to drill a hole in the blade to replace the thumb studs, like spyderco does. I have the smallest drill press you can get from harbor fright but I can't get it to drill through the blade. Do you think its the bits, press, or what. When I tried it the bit lite up like a cherry on cigarette and I stopped. Any help you can give would be great appreciated. The blade is 14c28n. Tks
Yeah, hardened metal is killing those bits. Start with a smaller hole/bit than you need and step up. Low and slow drill speed with plenty of cutting fluid. Use the best bits you can.
where do you recommend is a good place to find a strider pt for sale? i can never seem to find one for a good price :/ it’s my grail after an sng turned out to be too big
Great video, Stassa, and an incredible set! I had a similar thought about the detent on my Arius. Same gen/batch and spec as yours, but with the flipper. The action was amazing, but the detent was bordering on too heavy. I ended up trading for a batch 3 and the detent is a decent bit lighter, which I prefer; makes the middle finger flick especially more comfortable.
Hi Stassa! Great video, thanks for sharing! Can you tell me where you got the thumb stud replacements for the Chris Reeves knives and were the originals hard to replace? I have the small sebenza 31 and the small inkosi I would like to mod. Thanks again!!!
Check out the “Knife Modders” here on RUclips, I’m pretty sure they did a video on how to remove the press fit studs. I’m not sure what studs I used because I have a big tackle box full of knife parts that I usually go through and find something that fits what I’m doing lol I use to do warranty work for Bestech so I had a lot of spare parts from broken knives as well as a lot that I’ve bought over the years. I’ll try to measure them when I get back into town. Search Etsy for small Sebenza thumbstud replacement studs
Awesome stuff 🔥I own quite a few of those models but there are quite a few there I got my eye on like the Roosevelt, Trevor burger, strider pt. Can’t wait until part 2
I couldn't find a single knife that I would want from your collection. The quality and price of those knives can't compensate for a lack of taste. Imagine having a collection of whatever was popular but with no rhyme or reason for any of it.
seriously man, at a certain point aren't you embarrassed to have that much cash tied up in toys for yourself? i'm a working class dad myself and just realized this personally.
Everyone has something they enjoy or buy more than they need. Think about it.. how many knives do you need? Realistically one. Guns? One. Cars? One. House? Honestly don't need a house can get a trailer for a fraction of the cost. How many meals do we need a day? One. Shoot we only need to eat once to twice a week to survive.... its all relative. But to say one is embarrassed is rude on your part. Everyone has something they buy that they don't need nor use but for the shear enjoyment of it. Just let people enjoy their life. Mind your own business and you do you bro. Be better off not worrying about others and THEIR decisions in life.
@@kyleburton7394 sure everything is ok, and everything is relative, and everyone can choose what's right for them... cmon the fuck on. look at this video. it's mental illness on display. look at how social media has brainwashed us to indulge selfish behavior. anyways i love this channel and knives. but i just sold off about 20k in striders. now my daughter has a 529 plan and maybe she won't have to bust her ass like i do every damn day.
Beautiful, beautiful Sigil. Always loved that knife, rest is art and a half too, of course. Love collection vids. Thank you, sir.
Dude, that doppler 21 is one of the coolest knives ever made, IMO.
great looking collection. Thanks for sharing
Yeah buddy. Talk about a part one. Some beauties you've got there. Thanks for sharing them
An unreal collection for sure...or part of it. Wow. I need to hide my head in shame. Ha. Thanks for sharing.
Awesome stuff man! I have never handled a single one of these. But my 2 favorites are also the BBM and the Roosevelt. Flunky made the BBM my absolute grail 3 years ago and nothing has changed!
I’m with you on the BBM and Rosie. If that Marfione Custom CT was a mirror polished Hellhound it would be up there too!!
@@evanacey1414 hellhound is sexy! My other grail would be the small Satori
I have just noticed that the strider has a see through pivot...how very interesting 🤔
INCREDIBLE collection!!
Sweet knives Sir thank you for sharing!
Loved this collection- Koenigs to brian Brown to Sigil amazing thanks for sharing
Really cool video. Thanks for sharing.
Been saying this. Nick got this sickest collection. Up to me id say next day but I suppose to get the views anticipation is key. 3-4 days.
I need 5 box's with pre cut foam like you have for my folders but I'm not wanting to pay ridiculous prices for that, are there any similar but cost effective options?
Harbor Freight makes a budget version called Apache cases. I have the 3800 and am quite satisfied. Lots of vids on these cases.
Amazing collection, that was a lot of fun, thank you! If you ever Look for somebody to sell the Polygom SNG let me know 😀
Your collection is awesome
Knives are cool but I’m here for Copper Dice.
The Shiro Neon Lite just has the best form and size for EDC ever, well for me anyway, the one with inlays would be the cherry on top.
Agree. One of the most perfect carry knives on the planet. For me, Holts are the only thing that really compete with Shiros.
Nick, my goodness, what an amazing collection you've acquired. Thank you so much for sharing it with us and for all you do to support this great knife community!
I've begun to amass a nice collection myself, though I'm not quite ready to venture into the $400+ realm. I suspect someday soon, though, as I'm looking to "thin the herd" myself and begin investing in some higher-end pieces! You've given me some ideas to pursue.
The 31 is amazing
Most impressive 👏 Mr Stassa!
Awesome collection!
Just awed at your collection..KNICE..I'll take one of those EVO'S please..😁👍🔪👌
I would be interested in the Hinderer XM-18 harpoon spanto slim if you choose to sell it, as I currently have no Hinderers in my collection I am in the market for a couple two-tree of them lol.
Just a heads up: I would advise against trading the Neon Lite for a Neon Zero. I’ve had both, a few versions of the Zero and I’ve stuck with the Lite. Unless you’re planning on moving up to a Custom Division, the Zero has a way stiffer pocket clip and most suffer from deathlock, at l least when new. Even once broken in you still have to watch where you put your fingers to stay clear of the lockbar. I love them all and would encourage you to get them all, but I would get rid of the Lite to get it. At least see if you can try one out first, just to be sure. Good luck with it, sir! Love your videos! 🙏🏼🙏🏼🙏🏼👊🏻
That was amazing!
so much goodness and grails in 1 collection. thx for sharing! 👍
Badass collection and video man🤘🤘
Nice Hinderer Collection 😎😎😎
Awesome collection, looking forward to the rest of them and thx for sharing them with us. When you do your knife sale could you do it on RUclips because I’m not on Instagram… Thx again 👍🏼
Dude, UH MAZING collection. If you EVER get rid of one of those CKFs I will pay a ridiculous amount for either one. Like take my money🤲💵. That and a custom Strider are my two dream knives. Unfortunately I can’t get my hands on either lol
Or one of the striders… I’m not picky lol
I need a Hinderer!
I think you might have a problem Stassa! I’m starting Knafs Anon if you ever want help. 😂.
Do you know of any full integral micarta knives?
It's not strong/stiff enough, at least not at any realistic folding knife thickness.
Not saying someone won't eventually make one, just that it would be extraordinarily dumb to buy one.
This was a perfect way to spend a snowed in morning. Thanks for taking the time to do it. Amazing collection.
I love to see any vid you put out no matter the length. I got a knife mod question. I'm trying to drill a hole in the blade to replace the thumb studs, like spyderco does. I have the smallest drill press you can get from harbor fright but I can't get it to drill through the blade. Do you think its the bits, press, or what. When I tried it the bit lite up like a cherry on cigarette and I stopped. Any help you can give would be great appreciated. The blade is 14c28n. Tks
Yeah, hardened metal is killing those bits. Start with a smaller hole/bit than you need and step up. Low and slow drill speed with plenty of cutting fluid. Use the best bits you can.
Klasse ,gute Sammlung.
How long have you been seriously collecting knives?
where do you recommend is a good place to find a strider pt for sale? i can never seem to find one for a good price :/ it’s my grail after an sng turned out to be too big
I don't know if you're still looking for one but I have an extra one I'd be willing to part with.
Sweet mother of Kronos.
Great video, Stassa, and an incredible set!
I had a similar thought about the detent on my Arius. Same gen/batch and spec as yours, but with the flipper. The action was amazing, but the detent was bordering on too heavy. I ended up trading for a batch 3 and the detent is a decent bit lighter, which I prefer; makes the middle finger flick especially more comfortable.
Good collection of knives you should mentioned at least the kind of blade the length of the knife & the approximate price of each knife etc ...
I have 7 off these videos so in order to keep them under an hour I had to just show them briefly and also I have reviews to a lot of them 👍
Droolfest! 🤤 😛🤩😲
Hi Stassa! Great video, thanks for sharing! Can you tell me where you got the thumb stud replacements for the Chris Reeves knives and were the originals hard to replace? I have the small sebenza 31 and the small inkosi I would like to mod. Thanks again!!!
Check out the “Knife Modders” here on RUclips, I’m pretty sure they did a video on how to remove the press fit studs. I’m not sure what studs I used because I have a big tackle box full of knife parts that I usually go through and find something that fits what I’m doing lol I use to do warranty work for Bestech so I had a lot of spare parts from broken knives as well as a lot that I’ve bought over the years. I’ll try to measure them when I get back into town. Search Etsy for small Sebenza thumbstud replacement studs
@@Stassa23 Thanks so much for replying! Very appreciated!!!
I never looked at Etsy, but going there now…. Cheers!
@@conradh7659 I know they use to have some for both the large and small 👌
@@Stassa23 Thanks again and appreciate you taking time to point me in the right direction! ETSY was helpful as was the RUclips recommendation! Cheers!
That’s a hole lots of knives man 😱
U have a sick collection it's a honor to see it ty for sharing
Heck yeah
Mirror polished stonewash?? I don't have words. They're at different ends of the spectrum. Put a mirror polish on it and then scratch it up?
Nice 👌
Definitely got one of the best collections amongst the people I watch brother! I have a couple myself!
hey Nick thanks for this video! I thoroughly loved it and can't wait for the next!
Nice!
That Rotten design Evo is an incredible knife . Stunning collection Stassa23 thanks for video
Absolutely gorgeous collection 💯super jealous 👍🏻
I wish you would include prices and how made your wife was that you spent on each!
Insane
Love everything I saw. Great taste in knives Sir!
👍
Good video as always brotha!! Love these collection videos!
👍👍
Awesome stuff 🔥I own quite a few of those models but there are quite a few there I got my eye on like the Roosevelt, Trevor burger, strider pt. Can’t wait until part 2
Let me know if you ever want to ever get rid of one of your SNG’s.
I don't know if you're still looking but I have a Strider PT I'd be willing to part with. Not an easy decision for me however.
I couldn't find a single knife that I would want from your collection. The quality and price of those knives can't compensate for a lack of taste. Imagine having a collection of whatever was popular but with no rhyme or reason for any of it.
Awesome knives selection. I love the mini Goblin but it's pricey as f*** :D
What a sick collection. Would you ever trade that Strider?
So YOU are the reason, I can't buy a hinderer knife 😄
Your hand needs a break from all those knives
Awesome collection bro!
Plz trim those nails 🫣
Man, your collection is so out of my range. I need high altitude oxygen masks to just to peruse your entry knives. Ha-ha!
seriously man, at a certain point aren't you embarrassed to have that much cash tied up in toys for yourself? i'm a working class dad myself and just realized this personally.
Everyone has something they enjoy or buy more than they need. Think about it.. how many knives do you need? Realistically one. Guns? One. Cars? One. House? Honestly don't need a house can get a trailer for a fraction of the cost. How many meals do we need a day? One. Shoot we only need to eat once to twice a week to survive.... its all relative. But to say one is embarrassed is rude on your part. Everyone has something they buy that they don't need nor use but for the shear enjoyment of it. Just let people enjoy their life. Mind your own business and you do you bro. Be better off not worrying about others and THEIR decisions in life.
@@kyleburton7394 sure everything is ok, and everything is relative, and everyone can choose what's right for them... cmon the fuck on. look at this video. it's mental illness on display. look at how social media has brainwashed us to indulge selfish behavior. anyways i love this channel and knives. but i just sold off about 20k in striders. now my daughter has a 529 plan and maybe she won't have to bust her ass like i do every damn day.
@@quickcuts3000 so it was ok til you got rid of you 20k worth of striders?
Absolutely cannot stand these remarks. What does it matter what someone does with their own time and money as long as they're not hurting others?
👍👍👍