I wish you knew what you were doing. What you have in front of you is an equalizer that has the ability to make the worse sounding recorded music sound incredibly good.
Jaime Estevez All I am saying is you moving the buttons demos nothing important. If you sold it good job. I just hope the new owner doesn't flip out when he realizes I got a 15 band EQ yesterday for 62 dollars that is better. LOL :-P
exactly ... if you do not know what the point of the video do not make conjectures, youtube is a tool only for my business, I do not teach or do tutorials
Sorry... the truth is that I bought a complete PA Equipment; in fact I would not know how much it cost each piece., but I can say for How much this EQ were sold... I remember at $120.00 dollars plus postage, which are approximately $ 25.00 in USA. thank you
Hola amigo Jaime he visto tu video y me preguntaba si me podrías ayudar yo tengo unabegringr modelo 3102 de 31 bandas como puedo instalarlo Y si me podrías mandar algunas fotos gracias
hola nesecito tu ayuda dime como haces para regular los 2 canales tengo uno sumilar pero en mono regula el de arriba y en stereo regula solo el de abajo se q tiene un link q copia los 2 canales quiero regular como tu lo haces gracias
luciano sequeira monoaural , tienes razon solamente una linea actua, pero en stereo tienen que ser independientes, dame el modelo que tienes para poder darte una mejor opinion, okpor lo que me dices creo que el selector MONO/ STEREO esta en malas condiciones o sucio simplemente, pero espero que me des el numero de modelo.
es un phonic iA231f dual 31 band no tiene boton de mono´/stereo le pongo dos cables de entrada y 2 de salida,, pongo en stereo o mono,el crossover behringer cx2310 pero le doy link y no cambia en nada gracias x tu consejo
luciano sequeira creo que no te entiendi o me explicaste mal desde un principio...tu EQ es stereo 100%, no hay modo monoaural, tu problema es la cadena con el crossover..., el crossover tiene 2 modalidades que son, "3 vias /un canal "(mono) y 2 "vias dos canals" (stereo), si conectas en cadena directa y seleccionas en el crossover 2 vias (MODE-stereo two way), entonces tu equalizador junto con el Xover trabajara 100% stereo, ahora si el Xover lo seleccionas en 3 vias-mono (MODE- 3 way) unicamente lo que pasa por la entrada del canal 1 de tu Xover tendra cambios, es decir , el canal 1 de tu EQ tendra efecto, vasandome en que CH1 y CH2 son Izquierdo y derecho respectivamente, espero que esto ayude a discrepar algo tus dudas, tu Xover solo puede usarse en stereo a 2 vias. espero tus comentarios, saludos
Jaime Estevez gracias jaime x tu aporte capas sea asi en stereo le das boton link y tiene un cambio minimo ,pero en mmono el crossover a tres vias el ecualizador me funciona solo el canal 1 y el dos ningun boton le hace algun cambio en el sonido , poniendo en mono el crossover me suena mejor los parlantes de medios rinden mucho mas creo q lo voy usar en mono ,,cuando vi tu video me gusto la forma en q funciona tu ecualizador ,este mio tiene feder back y salida de subwoofer independiente x ahi le encuentro la vuelta y le saco mejor sonido solo tocandolo un poco mas ,, muchas gracias amigo x tu ayuda
luciano sequeira creo que hay algunos detalles que tienes que poner en practica, este crossover tiene selector de frecuencias, esto merece a que dan opciones para diferente tipo de parlantes, en mono pierdes mucho, porque en realidad no es monoaural... es un solo canal. monoaural refiere a dos canals juntos L+R, en este caso entonces si lo usas en "mono" estaras desperdiciando el canal derecho (ch2) por completo... si tienes bocinas para usarlo en 3 vias (entonces creo que usas 3 amplificadores), creo conveniente que compres otro Xover identico,, de otra forma estaras perdiendo tambien reproduccion de algunas frecuencias, no conozco tus set de bocinas pero quisiera ayudarte un poco mas, tambien te sugiero que busque es manual de el Xover, ahi te marca con mas detalles las frecuencias y forma de usarlo...
Terima kasih telah memanggil saya seorang guru tetapi saya bukan, apa yang Anda katakan terjadi di eq Anda atau di video saya, karena saya sudah melihatnya dan saya tidak melihat apa yang Anda katakan. Bagaimanapun, jika yang Anda maksud adalah cahaya padam atau kehilangan intensitas saat menggesernya, itu karena potensiometer kotor dan menyebabkan kontak yang buruk, dalam audio dipantulkan sebagai kebisingan saat menggeser potensiometer dan dalam lampu menyebabkan kedipan, cahaya pengurangan atau LED padam sepenuhnya
testing the potentiometers, for those who are interested in buying it, it is not a tutorial, but if you have technical questions or how or where to use it, I can gladly advise you
Exelente video, sin decir una palabra, deapejó todas mis dudas.
I wish you knew what you were doing. What you have in front of you is an equalizer that has the ability to make the worse sounding recorded music sound incredibly good.
woaaoo, EQ does that? hmm, thanks,
SOLD!
Jaime Estevez All I am saying is you moving the buttons demos nothing important. If you sold it good job. I just hope the new owner doesn't flip out when he realizes I got a 15 band EQ yesterday for 62 dollars that is better. LOL :-P
I don't see the point of what you were doing. Why don't you try and demo to get a better sound instead playing with knobs.
exactly ... if you do not know what the point of the video do not make conjectures, youtube is a tool only for my business, I do not teach or do tutorials
Thijs van Gisbergen thank you Thijs
He's showing functionality!
Bom dia gostaria de saber pq o meu equalizador ñ acende os leds ? Acende um ou outro poderia me ajudar meu irmão .
GEQ vs FBQ model, who better
hi. jaime , now this is something else...what do you hook this up too? was this from a recording studio?
can be used anywhere, but usually PA systems, in Studios is very rare to find this, for studio parametric EQ works best
Was hoping for a review of the features, impressions, measurements....what was the point of this video?
test only, was for sale
Lols this is like watching somebody who doesn't know how to drive stick drive a Ferrari
si pones en 75 hz estas cortando las frecuencias de 10 a 75
Haw much did it cost you
Sold
thanks
I just wanted to know haw much it cost you not if it was for sale
Sorry...
the truth is that I bought a complete PA Equipment; in fact I would not know how much it cost each piece., but I can say for How much this EQ were sold... I remember at $120.00 dollars plus postage, which are approximately $ 25.00 in USA.
thank you
@@Jaime_Estevez Why so much, I bought it for 40$ yesterday (used) :)
Hola amigo Jaime he visto tu video y me preguntaba si me podrías ayudar yo tengo unabegringr modelo 3102 de 31 bandas como puedo instalarlo Y si me podrías mandar algunas fotos gracias
que mezcladora y amplificador o Crossover tienes ?
U do know they came out with a 2nd 3102 it has FBQ
BRAAHMAN B. Yes, model: FBQ3102, I have that one for my PA.Thank you
hola nesecito tu ayuda dime como haces para regular los 2 canales tengo uno sumilar pero en mono regula el de arriba y en stereo regula solo el de abajo se q tiene un link q copia los 2 canales quiero regular como tu lo haces gracias
luciano sequeira monoaural , tienes razon solamente una linea actua, pero en stereo tienen que ser independientes, dame el modelo que tienes para poder darte una mejor opinion, okpor lo que me dices creo que el selector MONO/ STEREO esta en malas condiciones o sucio simplemente, pero espero que me des el numero de modelo.
es un phonic iA231f dual 31 band no tiene boton de mono´/stereo le pongo dos cables de entrada y 2 de salida,, pongo en stereo o mono,el crossover behringer cx2310 pero le doy link y no cambia en nada gracias x tu consejo
luciano sequeira creo que no te entiendi o me explicaste mal desde un principio...tu EQ es stereo 100%, no hay modo monoaural, tu problema es la cadena con el crossover..., el crossover tiene 2 modalidades que son, "3 vias /un canal "(mono) y 2 "vias dos canals" (stereo), si conectas en cadena directa y seleccionas en el crossover 2 vias (MODE-stereo two way), entonces tu equalizador junto con el Xover trabajara 100% stereo, ahora si el Xover lo seleccionas en 3 vias-mono (MODE- 3 way) unicamente lo que pasa por la entrada del canal 1 de tu Xover tendra cambios, es decir , el canal 1 de tu EQ tendra efecto, vasandome en que CH1 y CH2 son Izquierdo y derecho respectivamente, espero que esto ayude a discrepar algo tus dudas, tu Xover solo puede usarse en stereo a 2 vias. espero tus comentarios, saludos
Jaime Estevez gracias jaime x tu aporte capas sea asi en stereo le das boton link y tiene un cambio minimo ,pero en mmono el crossover a tres vias el ecualizador me funciona solo el canal 1 y el dos ningun boton le hace algun cambio en el sonido , poniendo en mono el crossover me suena mejor los parlantes de medios rinden mucho mas creo q lo voy usar en mono ,,cuando vi tu video me gusto la forma en q funciona tu ecualizador ,este mio tiene feder back y salida de subwoofer independiente x ahi le encuentro la vuelta y le saco mejor sonido solo tocandolo un poco mas ,, muchas gracias amigo x tu ayuda
luciano sequeira creo que hay algunos detalles que tienes que poner en practica, este crossover tiene selector de frecuencias, esto merece a que dan opciones para diferente tipo de parlantes, en mono pierdes mucho, porque en realidad no es monoaural... es un solo canal. monoaural refiere a dos canals juntos L+R, en este caso entonces si lo usas en "mono" estaras desperdiciando el canal derecho (ch2) por completo... si tienes bocinas para usarlo en 3 vias (entonces creo que usas 3 amplificadores), creo conveniente que compres otro Xover identico,, de otra forma estaras perdiendo tambien reproduccion de algunas frecuencias, no conozco tus set de bocinas pero quisiera ayudarte un poco mas, tambien te sugiero que busque es manual de el Xover, ahi te marca con mas detalles las frecuencias y forma de usarlo...
mau nanya master. fader equalizer beringer GEQ 3102 bila di geser fadernya kayak arus konslet .apanya master.mohon pencerahanya
Terima kasih telah memanggil saya seorang guru tetapi saya bukan, apa yang Anda katakan terjadi di eq Anda atau di video saya, karena saya sudah melihatnya dan saya tidak melihat apa yang Anda katakan.
Bagaimanapun, jika yang Anda maksud adalah cahaya padam atau kehilangan intensitas saat menggesernya, itu karena potensiometer kotor dan menyebabkan kontak yang buruk, dalam audio dipantulkan sebagai kebisingan saat menggeser potensiometer dan dalam lampu menyebabkan kedipan, cahaya pengurangan atau LED padam sepenuhnya
Dude!! max your volume and do that !!!
Eu tenho desse, ou não sei usar ou está em circuito 😢
sorry for the late reply, tell me what audio equipment you have?
how you want to use it or where, or any idea, in order to give you the best option
Agradeço sua atenção amigo, informando que já foi vendido......
Лучшей обзор не понимаю почему столько дизлайков
потому что люди не понимают, что такое видео
What are you doing?
I'm sorry this video is not a tutorial, you're in the wrong channel
ohhh I'm sorry
A los graves tienes que poner en 10 hz para no despreciar las frecuencias vajas
and now in 2018 i want one ;)
Cek harga
in life no matter what expensive rig,gears you have but you dont know how to use or calibrate it..no sense 😥😧 just telling the truth..
Enak mana bos eq nya sama BSS
I guess, you have no idea what youre doing
Los cables RCA como estan conectados,con adaptador?
asi es, RCA a 1/4
Number ONE good
Top
Cara mau pesanx gmn..
What are You trying to Prove.?????
nothing, it's a test, it's not a tutorial.
What the Heck you are doing ?
testing the potentiometers, for those who are interested in buying it, it is not a tutorial, but if you have technical questions or how or where to use it, I can gladly advise you
Ahahahaha stop it junior your dad in on the way....
So, what's the point?
just testing , the eq was for sale, my channel is not for tutorials
Harga brapa
pm harga
No tweeters were harmed in making of this video,kaboom oh wait they blew up
yes, yes son, nothing happens , relax
I can see that you don't know what this is for.
I can see that you can't read, where does it say tutorial?
LOL. Poor EQ!
great video
You're funny
You dont know how to use it, do you? ;)
nop
капец
ruclips.net/video/qPpt4apoXjQ/видео.html lo mejor
you dont know how to tune an pair of speakers do you
if you eq to high volume you will blow the speakers .
Dave30867 Ya know what? Thats no tutorial.
Sorry, missed chance to bring over useful info to your audience. Wasted 5 minutes and 10 seconds of my time.
look for titles with "tutorial" wen you do the search