Но смысл был от точечной сварки, если автор в итоге перегорел акб при усадке бутылки... Термоусадочный рукав для того и используют, чтоб он быстро усадился и вы не успели нагреть акб.
Про 8 параллельных акб вообще молчу, такое допустимо только в дешёвых сборках. Если вам нужен акб на долгое и стабильное использование, параллельно ставьте минимум акб.
@@user-wt5gl9dw6qон имеет ввиду накладок дополнительных теплоустойчевых они продаются и защитят когда тонкая изоляция банки протрётся отвибрации лопнет или проплавится. Всякое бывает.
@@najibkasim9102 Extra ring stil needed . Whole body of 18650 is pretty much negative contact, while overheating, mechanical damage etc etc red insolation of 18650 easily damaged, pretty much connecting negative and positive through nikel line
That's at least 200wh. Legally you can't have batteries totally over 100wh in total. In most cases the airport security will turn a blind eye even if you have a laptop/phone/powerbank/portable console that usually exceed that 100wh limit. But coming with such a large battery at the airport is basically acting like a 🤡 searching for attention.
Реализация хорошая, а с точки зрения физики всё очень плохо. На сколько ампер рассчитана эта самая BMS плата? Как правило её рассчитывают на 40-60 а. То есть если на неё подадут максимальную нагрузку, то вот эти самые ленточки которые выдерживают 12 ампер просто нагреются очень сильно и расплавят изоляцию, что может привести к пожару. Надо делать несколько слоёв вот этой самой никелированные ленты.
Никелевые ленты есть сильно разной толщины. На камеру ты это не отличишь. Будем надеяться что автор пользовал толстые.( Хотя есть сомнения ибо вот тот мини сварочник вряд-ли потянет толстую варить)
I like the thriftyness but you should use insulation under the BMS when you fold the tabs it will rub on the side and short out that cell and cause problems.
Don’t bother. There pants don’t give you a good weld and he’s not going to be able to use that for much more then charging a phone that’s probably 0.05mm nickel at best guest anything that needs high draw current you want 0.2mm really I have 36kw spot welder and that will weld about 0.9-1mm of nickel on full power witch is mentle
Yea too bad this isnt legit. The one thing that gave it away? Well when using a bottle of that size and cutting it even when you shrunk it around the pack you would still see the parts where you cut. That being said its no wonder why your comments section is full of people who are smarter then you.
Those look like plated strips. I hope you accounted for their Resistance and lack of current carrying power. As long as that pack doesn't need to pull more than 20 amps total you should be ok. If you used strips on each series maybe 30A on the series connections but you would need a copper wire for the "well" closest to the external positive and negatives. Or If you used pure nickel the whole way and connected each cell for the series connections youd still need like 3 layers of .15 at the well to pull anything close to what this probably needs. You may not melt down but you definitely are spending 25% of your capacity to heat generated. Best of luck brother. Pure nickel the way to go. But as far as workmanship A+ sir
Battery ❌ tnt ✅
i thought it was shotgun shells
Lol...😂😂😂
Why? Its a normal re-charger battery
@@Sora_Zawa same thing
he shouldn't put it in contact of any redstone singnal😅
Green bottle se protect karne ka idea awesome tha👌👌👌👌👌😳
Но смысл был от точечной сварки, если автор в итоге перегорел акб при усадке бутылки...
Термоусадочный рукав для того и используют, чтоб он быстро усадился и вы не успели нагреть акб.
Про 8 параллельных акб вообще молчу, такое допустимо только в дешёвых сборках.
Если вам нужен акб на долгое и стабильное использование, параллельно ставьте минимум акб.
Hmare hyaaan to bat ka niche wala part bottle se cover Kiya jaata hai 😂🤫ye trika bhr ni jna chaihiye
overheating explode
Not good. Heating problem
no ring insulation on positive side of battery before spot weld
Она там есть
@@user-wt5gl9dw6qон имеет ввиду накладок дополнительных теплоустойчевых они продаются и защитят когда тонкая изоляция банки протрётся отвибрации лопнет или проплавится. Всякое бывает.
That's original 18650 battery that have hard plastic ring insulator inside of the top of the battery
@@najibkasim9102 Extra ring stil needed . Whole body of 18650 is pretty much negative contact, while overheating, mechanical damage etc etc red insolation of 18650 easily damaged, pretty much connecting negative and positive through nikel line
It won’t be a problem but it’s not a bad idea to cover it
Imagine trying to bring this through an airport LOL
😂
@@MohitGosavi-zs9gv
😂😂😂
🤔😂💣
They’ll see it as a 200WH hour battery
That's at least 200wh. Legally you can't have batteries totally over 100wh in total. In most cases the airport security will turn a blind eye even if you have a laptop/phone/powerbank/portable console that usually exceed that 100wh limit. But coming with such a large battery at the airport is basically acting like a 🤡 searching for attention.
99% of DIY stuff are just cheap and wrong, but the green bottle as heat shrink is genius.
My anxiety when he is using heatgun near 18605 clls 📈📈
@@user-pm4zj8qd9jI was literally about to say that lol. Especially because the plastic bottle takes so much more heat than regular heat shrink
Yeah genius, first he overheated the cells and then he is gonna use them without any heat dissipation 😂
@@stormfire1435 Yeah also BMS generates lots of heat
@@user-pm4zj8qd9j Almost 18650 cal.
Brilliant idea, using plastic bottle as a heat shink insulation 🎉
бутылка содержит соединения хлора
Así se impide a cualquier corriente de aire refrescar las celdas y los semiconductores
overheating explode
@@user-wq6kn8hq7iWhy get hot?
@@user-wq6kn8hq7i negativity explode
*Bro's being Creative!*
*He turned on Creative Mode*
@@Hakutaralol
Реализация хорошая, а с точки зрения физики всё очень плохо. На сколько ампер рассчитана эта самая BMS плата? Как правило её рассчитывают на 40-60 а. То есть если на неё подадут максимальную нагрузку, то вот эти самые ленточки которые выдерживают 12 ампер просто нагреются очень сильно и расплавят изоляцию, что может привести к пожару. Надо делать несколько слоёв вот этой самой никелированные ленты.
Никелевые ленты есть сильно разной толщины. На камеру ты это не отличишь. Будем надеяться что автор пользовал толстые.( Хотя есть сомнения ибо вот тот мини сварочник вряд-ли потянет толстую варить)
@@midasgames9331такая сварка толще 0.15 не варит и то с трудом, у меня есть такая, и то только никилированную ленту, про чистый никель можно забыть
Ладно, занудный русский электрик, на самом деле я из Индии и немного знаю русский язык.
@@kunarnav1985 я учитель физики. Я собрал 3 аккумулятора. Перед сборкой надо выполнить расчеты, желательно всегда надо брать запас по силе тока
Так мало этого, балансировку не подключил
Какая же отличная идея, нагревать литий-ионные батареи феном, усаживая пластик на них. А если серьезно, разве это не скажется на их работоспособности?
Одевая термоусадку, тоже ведь греть надо. А бутылка быстро садится, не успевают нагреть аккумулятор.
I like the thriftyness but you should use insulation under the BMS when you fold the tabs it will rub on the side and short out that cell and cause problems.
Test video please
why are you need the test? It is 98% factory parts. Don't you trust factory end?
کارش خیلی زیبا و حرفه ای بود.❤
فكرة القنينة الخضراء فكرة رائعة
والسخونية
في حاجات يستحسن عدم الابداع فيها
Please give the link of that portable spot welder and multimeter
Search Man
1.MinderRC DH30 MAX
2.GVDA GD188 3 in 1 Digital Oscilloscope Multimeter
Find me that 3d printer with a silver shell and the 4 plastic spools on top and the screen@@aashishgupta1580
Don’t bother. There pants don’t give you a good weld and he’s not going to be able to use that for much more then charging a phone that’s probably 0.05mm nickel at best guest anything that needs high draw current you want 0.2mm really I have 36kw spot welder and that will weld about 0.9-1mm of nickel on full power witch is mentle
I googled it in 2sec the names on it. He’s not keeping secrets from you.
@@thelewisvrfamily2113not too much heat for the cells?
El truco de la botella me dejó impactado 😮👏🏾👏🏾👏🏾👏🏾
Awesome, Thanks the Creation. ❤
Abdul bhai ka maqsad pura.. 👍
Abdul ka maksad battery pack bana tha kiya 🤔
@@Rahukal-🍼piyo tum abhi
fir lynching karne kab ja rahe ho lol
保護板的排插沒有插線啊
這樣怎麼均衡?
Seems nickel strips are used in this case
He maked real boom🥲 because when battery heated they chance of blast/burning. Too risky 😢
Wow... greath work
Those shoddy welds are why my Chinese scooter battery broke. Such an easy fix if it was safe
you need to be careful before flying on an airplane, they might think it's a bomb 😂
They know how li-on cells looks like. However, how it he done it, its a bomb. It can catch fire or explode or even both at the same time.
Nice Nice ........ Thanks from the Infos 💪💪💪
Teleport this guys skills to america and fix so many broken scooter/ebike batteries and make more than enuf to justify the job
Я так и знал што пластиковые бутылки на штото ещё годны
Прям медитация, круто, спасибо
Thanks much for exhibiting the Soda Bottle heat treatment. That was fabulous. I will employ this technique.
It looked like a bunch of mini tnt packed together
I watched this video 3 times in a row. So satisfying!
Wow Superb 👌. Professional making 😮.
VERY impressive work, good job!
Bohot achi video hai bhai achi banaye video apne
NOOOO
LET THEM IN SERIES
Man that thing not gonna end well
Amazing ❤. Please describe material you use so we can understand more❤.
If youre talking about the electricity transfer, use anything conductive
1. Battery
2. Battery
3. Battery
4. Battery
5. Battery
6. Battery
7. Battery
8. Battery
9. Battery
10. Battery
...
24. Battery
25. Metal plate
26. Battery management system
27. Plastic bottle
28. Cable
@@haveaniceday3405If you don't know keep quiet.He also use heat resistant tapes.
Esa madre se va a sobrecalentar, hasta posiblemente explote xd
Sir, where do you buy your 18650 batteries from? Because as far as i know they are either expensive or bad quality.
Oooohhhh I like that trick with the green bottle!
Es más económico comprar un power bank que ese mamotreto jajaja
There should be air passage ,so that batteries are cooled
Put this in your pocket before going through TSA, they'll love it.
That spot welder was gucci
Amasing
TSA: “Sir, this is a makeshift bomb”
Seems like overheating might be a real problem with that insulation.
Yea too bad this isnt legit. The one thing that gave it away? Well when using a bottle of that size and cutting it even when you shrunk it around the pack you would still see the parts where you cut. That being said its no wonder why your comments section is full of people who are smarter then you.
Those look like plated strips. I hope you accounted for their Resistance and lack of current carrying power.
As long as that pack doesn't need to pull more than 20 amps total you should be ok. If you used strips on each series maybe 30A on the series connections but you would need a copper wire for the "well" closest to the external positive and negatives. Or If you used pure nickel the whole way and connected each cell for the series connections youd still need like 3 layers of .15 at the well to pull anything close to what this probably needs.
You may not melt down but you definitely are spending 25% of your capacity to heat generated.
Best of luck brother.
Pure nickel the way to go.
But as far as workmanship A+ sir
bhai Amar actor lagbo
nice bro
how to charge ?
Actually red is my favourite colour.
Bro is going to maie a tesla battery 💀💀
Hope it would not over heat??
That's why he use battery protection
@@mcreator7370
Where's the heat protection module?
Additional balancer
There's a great ltt video of why this mostly isn't viable
I did something like that once with six 3.7V lithium vape batteries and tried it on my old drill and it worked great😂
That looks more like a TNT for me💀
Bro's making a bomb 💀
Expensive if you're using quality batteries, but you would have a very capable battery.
Pls tell me the welder!
At first I thought that he took a shotgun clip and then I thought that he made a bomb and only then I realized that it was just a generator
"The mother of all little battery's Jack"
这种串联方式太草率了吧
Nice, you have a power bank that turns into a bomb 🎉
Nice video, thank you :)
That Bottle is a good idea I didn't think about that
Wow. Cool.
Ahaha
Forget balansing😂😂😂
How to get arrested at an airport 101
I wonder what you will do with this at the airport?
Some of the stupidest comments I’ve ever seen on the internet have been comments about this video
A delicate work
Thanos battery 😅😅
bros tryna make a fucking bomb 😭
Viewers: is it working?
RUclipsr : I don't know. Just follow the schematic diagram
So bro made a big ass battery, 👍
Vary danjeras
TnT in minecraft like:
Battery ko heat krna safe hai ?
Sirf kuch seconds Tak hi karte hai
Buttery ❌
TNT ✅
It should have a proper aur cooling pr else it will buildup heat
गजबे 👍👌
Linus tried to weld battery before
the bottle melting is so smart
I LOVE that GREEN!!!!!!!
Bel lavoro di qualità💪💪
Blud fr made a battery pack for his xbox controller😂😂😂 (I own a xbox so no hate)
Just imagine what would happen if you short that thing straight to heaven you go😊
最後怎麼封底的? 剪接? 我看你寶特瓶頭尾都切開了
Bomb Blast 🔥💥💥
Bro was making a bomb
Great. Having a heat gun right on batteries to hopefully not explode them
Ah
Heat gun and lithium ion battery
The perfect combination
Looks like a bomb 😂😂😂
Суровая челябинская термоусадка.
This will be more powerful than an inverter battery 😂
ما هو اسمها؟ كم يكلف؟ أخبرونى من فضلكم.❤❤❤❤❤😢
Good 😊
No thermal censor to stop charging, if the temperature gets too high 😉
What is its name? How much does it cost? Please let me know.
Для чего использовать эту батарею ? Напряжение при полном заряде будет около 18 вольт . Куда её применить ?
A friend requested and was going to DIY a car amp.
And the maximum voltage is 4 x 4.2V = 16.8V
I thought they were shotgun shells at first 💀
Балансировка вышла из чата