Is this Ham Radio Stuff Any Good? Kenwood TS-570S, Alinco Power Supply, and MFJ Tuners
HTML-код
- Опубликовано: 11 окт 2024
- Is this Ham Radio Gear any good? Let's check out a Kenwood TS-570s, Alinco DM-340MW power supply, MFJ-945E Tuner, and MFJ-969 Roller Inductor Tuner.
Thanks to Marc, N1WWZ for letting me check out this gear and make a video about it. If you enjoyed the video, please leave Marc a comment thanking him below!
► DISCLAIMER
This video is for entertainment purposes only.
► SUBSCRIBE
www.youtube.co...
► Visit My Outdoors Channel (SevenFortyOne Outdoors):
/ @sevenfortyoneoutdoors
► Previously, on the SevenFortyOne Channel:
/ sevenforty1
▼ CONNECT!
► Twitter: / sevenfortyoneb
▼ My Amazon Store:
► www.amazon.com...
#hamradio #kenwood #mfj #alinco
![CHILE vs. BRASIL [1-2] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 9](http://i.ytimg.com/vi/5ObJt_71AYc/mqdefault.jpg)
Thank you Mark for letting Rob check out your radio so we could see what a 90s radio looked and sounded like. Get on the air and enjoy your radio.
Glad you could check out your friend's radio,
The first rule about radio club is you don’t talk about radio club…the second rule about radio club……..😂 love the references! And glad to see older gear on the air! 73!
Dude I love the movie references in your test transmissions :)
Thanks Marc!
Looks like some great gear to get on the air and get after it !
Most tuners that have a peak/average display function require 12v external power for the meter to work properly, at least in the peak position.
Great video, look forward to the next radio tests.
From the manual of the 969:
The meter on/off button must be turned on for the meter to function... Also, later on they state you must have power to use the peak circuitry.
(I found this out the hard way with an MFJ 815D meter)
Interesting...I didn't know these required power to function correctly. Just for fun, I just tried it powered to see what would happen but the needles still don't move. I thought they were missing but they are jammed way down low and probably stuck. I could probably take the meter apart and free them up
Thanks for this review, it is perfect timing for me because I am waiting the arrival of a used TS-570S I just bought on ebay!
Even though the Kenwood is in ruff cosmetic state… it’s still better than most modern radios
Thanks Rob for checking this stuff out!! Glad to hear all is well. Oh, and the cracked screen on the tuner..... it was already there when i got it, you didnt do that.
Thanks Marc - I'm glad I didn't break that! Looks like your stuff is working fairly well...let's get an antenna up and get you on the air
I just keep watching and I see the double coaxial knobs up right for high and low cut control look mispositioned. Have a look there. Inner knob (high cut) fully clockwise, outer knob (lowcut) fully counter clokwise. This should be the default setting before any filtering.
D.
Thanks Mark ! 😃
I have just got one of these radios its a TS-570d , but unlike yours it seems to only be able to transmit up to 30mhz instead of 50mhz like yours there. Just getting to grips with it , so far I love it .thanks for the video🙂
Hi Rob, another thought other than others you already had on the 570.
Perhaps there’s an optional filter installed inside which is wrong? I’d take a peek inside as well as do a master reset as you did and have a look at the manual. Very wired, it is definitely not normal behavior. Let us know! Im so curious now…
73, Diego
I had the same thoughts but haven't opened the radio as it is not mine. I will leave it up to the owner to check this
Hello from Paul N8NUG LOL Great work!
Good call sign!
I have a 945E and it works great. There's nothing wrong with 90's gear either and Ham Radio is about the fun of the hobby. You don't need to be an expert to play Ham Radio. I've seen "professionals"...and I'll use that term loosely, who can't even make VHF analog repeaters work effectively in public safety.
I think there is something going on with that jumper in back. The 570 has one optional filter slot available. You have to choose a CW or SSB filter, Not both. The filter width on SSb should adjust to 2400hz. And yes the 570 is a little narrow for the eSSB guys. The 2400hz is also the widest transmit BW. some SSB guys are at 3000hz or wider. I have the 570d. Mine does not have 6 meters.
Excellent video
Very interesting and helpful video, Thank You
Im still using my 2008 570s ya cNt kill lt Thanks.VY1RF Ray
Ground is hardwired to the remote terminal. Odd.
Maybe that is why you have to activate fsk to hear wide-band? Just a thought.
It isn't about the stuff. It's about knowing what to do with the stuff.
Actually, this video WAS about the stuff and seeing if it worked.
I know it's an older video but the audio issue on ssb looks like it might be because you have the high and low cut dsp in the center which I believe is cutting out alot of the recieve passband. Turn the high cut full cw and the low cut full ccw
I don't have the radio here anymore but I'll pass this on to Marc
Good eye.
That scratched up plastic, get some fine around #2000 sandpaper to polish out that scratch.
Hey Rob, in your mind do you have an idea at what point you might consider yourself an expert? A certain amount of years or a certain amount of equipment testing where you could say to yourself yes at this point I can say I'm an expert?
I consider myself a "jack of all trades"...I know a little bit about a lot of stuff but don't have a mastery of anything really. Except maybe circuit board design and manufacturing...I've been dealing with that every day for over 30 years...
you have the dsp slope set wrong
Im not surprised
This video just proves again that before you use, or even evaluate, any piece of equipment read and work through the @#%& manual! You don't have to be an expert or technician to do that......
Thanks for your feedback - I'm glad you enjoyed the video
Please stop tapping the plastic and glass with screwdriver... Even though it is old and beat up, we reaspect the tools we use.