tx Scotty very clear tutorial.... it's my entering in the digital world. I have my analog pedalbnoard...nice and easy to understand. So I had some troubbles to understand how to make it work. Great help....I start to understand....slowly slowly
Ok, this looks like it will hit the spot. Seeing some complaints out there about not enough foot switches. Yes, it's minimalist, but with the use of the CTRL switch, I think you can get a 3 maybe 4 sound setup in any context, using just 2 presets. So, FS1 - Clean, FS2 - Crunch, FS2CTRL - Lead. Depending on how they manage 'last state', you might be able to make use of FS1CTRL as well. Yeah, it might not work for Steve Stevens, but this machine is a little below his pay grade.
All Guitars in this song are completly recorded with the MOOER GE200 Amp Modeler. Rain Air - Sitz Platz Bleib (Rammstein Style) Official Video ruclips.net/video/xxxjsjRtIRg/видео.html
If I want to put two effects that are under the same button, for example FX / COMP .. how do I do? If I want to put, for example, a compressor and a wah and maybe a boost Can't I? I just bought it but I'm going crazy ..
Hi, I bought a used unit and it works great but I can’t figure out how to change the order of the preset channels. I read the manual and watched the videos but there didn’t seem to be any clear instructions on how to customize the order of the existing preset channels. Can anyone help me out? I’m trying to replace my pedal board with this unit and would like a clean channel and a few different lead channels and an acoustic channel all lined up next to each other without having to creat new channels. Is that possible? Thanks
Interesting. Can anyone tell me how this would sound running through the auxiliary channel of a Marshall AS50D? I'd like to get rid of my Fender Blues Junior amp in favour of using just one amp - my Marshall acoustic amp - and wonder if running the GE200 through the clean auxiliary channel would be any good for electric guitar. Would it have good enough response and sound like a normal guitar amp?
i watched videos one and two. Nice playing and great sounds. Video 2 seemed the guitar out of tune. But anyhow what I need to know is a user can use footswitches to: #1 Turn on/off overdrive #2 Turn delay on/off #3 tap tempo for the delay #4 if possible turn wah on/off
I'm really getting confused here. I imagine you're pretty familiar with the unit which makes it easier to manage. I'm really considering one of these though.
I first watched this a couple days ago and it made no sense. Today I bought a GE200 home and played around with it for a few hours. After watching it again it makes perfect sense now. I've tried Boss, Zoom, and DigiTech multi effect processors; the GE200 is much easier to get the hang of - it's really intuitive once you start playing around plus it sounds amazing!
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Ooh that CTRL assign is brilliant ,similar to boss but easier to understand and use . Thanks will watch this again later when I have more time
tx Scotty very clear tutorial.... it's my entering in the digital world. I have my analog pedalbnoard...nice and easy to understand. So I had some troubbles to understand how to make it work. Great help....I start to understand....slowly slowly
Thank you Scotty:) This is how the revues should be done!!! Thank you again - I've already purchase one GE200...CHEERS:)
Rumen Aleksandrov how much did you get it?
Nice review. Can't wait to get my hands on the GE200!
Scotty, we need more distortion, now!
-I’m giving it all she’s got Captain!
This thing is AAAAAAMAZING!
Very easy, useful, and great deal with this setting and how to save the presets. Great pedal!
Ok, this looks like it will hit the spot. Seeing some complaints out there about not enough foot switches. Yes, it's minimalist, but with the use of the CTRL switch, I think you can get a 3 maybe 4 sound setup in any context, using just 2 presets. So, FS1 - Clean, FS2 - Crunch, FS2CTRL - Lead. Depending on how they manage 'last state', you might be able to make use of FS1CTRL as well. Yeah, it might not work for Steve Stevens, but this machine is a little below his pay grade.
Hi guys, but is possible to put in chain 2 or 3 modulation like chorus, flanger and phaser?
Hi waiting for mine to be delivered, is it possible to download presets for a particular artist and put them on the device?
Great demo Scotty - very well done - one question though - once you have a preset are you able to copy it and save to another empty spot - TIA
All Guitars in this song are completly recorded with the MOOER GE200 Amp Modeler.
Rain Air - Sitz Platz Bleib (Rammstein Style) Official Video
ruclips.net/video/xxxjsjRtIRg/видео.html
Can you make a dual amp preset on this unit?
Can you do another review of the amp simulations thanks
Thank you
tendria que haver un review de reverb delay etc..siempre muestran solo drivers
mine will be here Monday, can't wait!
mjones53 how is it going with the unit?
I want one. This or g3xn
is it possible to put in chain 2 or 3 modulación like chorus.flanger and phaser.??
So for live gig you can only change between 2 sounds with the footswitch...
Did I get it right?
Can you tell me if it is possible to load custom impulse responses and also is it possible to run a parallel signal chain thanks
I had make some patches...but the sound my own patch is low than the factory patch...what should i do?
If I want to put two effects that are under the same button, for example FX / COMP .. how do I do? If I want to put, for example, a compressor and a wah and maybe a boost Can't I? I just bought it but I'm going crazy ..
Hi, I bought a used unit and it works great but I can’t figure out how to change the order of the preset channels. I read the manual and watched the videos but there didn’t seem to be any clear instructions on how to customize the order of the existing preset channels. Can anyone help me out? I’m trying to replace my pedal board with this unit and would like a clean channel and a few different lead channels and an acoustic channel all lined up next to each other without having to creat new channels. Is that possible? Thanks
Can you change the place of the factory settings
Can you stack effects within the same category?
I'd like to know the same thing.
Same question!
Bueller?
It does not look like a channel that answers question.... rubbish!!!
How to adjust volume with pedel
thanks very informative. helped me allot.Cheers dude
I just want to know if it is possible to save presets in banks.
Which audio is connected with ge 200? Sorry for my english. Thanks
How's the Wah?
It's pretty good, it's a good pedal overall takes a while to figure everything out though, has loads of wahs
Interesting. Can anyone tell me how this would sound running through the auxiliary channel of a Marshall AS50D? I'd like to get rid of my Fender Blues Junior amp in favour of using just one amp - my Marshall acoustic amp - and wonder if running the GE200 through the clean auxiliary channel would be any good for electric guitar. Would it have good enough response and sound like a normal guitar amp?
i watched videos one and two. Nice playing and great sounds. Video 2 seemed the guitar out of tune. But anyhow what I need to know is a user can use footswitches to: #1 Turn on/off overdrive #2 Turn delay on/off #3 tap tempo for the delay #4 if possible turn wah on/off
if you have please send me. Mooer ge 200 update firmware 2.0 or 2.0.3
If I wanted to run this through a cab instead of an amp what else would I need?
an amp
What is MST in the controls ?
Master Volume 😉
I'm really getting confused here. I imagine you're pretty familiar with the unit which makes it easier to manage. I'm really considering one of these though.
I first watched this a couple days ago and it made no sense. Today I bought a GE200 home and played around with it for a few hours. After watching it again it makes perfect sense now. I've tried Boss, Zoom, and DigiTech multi effect processors; the GE200 is much easier to get the hang of - it's really intuitive once you start playing around plus it sounds amazing!
Damn, that sounds good
I would love to try this mooer ge200. But I'm broke af hahahaha
what a voice
Wish you could just say control instead of C.T.R.L
Moore Audio ? Why didn't you show some Sheading ON the get 200 You mest it up for all of us out there . TroyFrost / Troyster .
Here is a test for ge200 : ruclips.net/video/2J-TQShdPtY/видео.html
is it possible to put in chain 2 or 3 modulación like chorus.flanger and phaser. ???
I had make some patches...but the sound my own patch is low than the factory patch...what should i do?