Hi and thanks for the video . Helps a bit with the in betweens ...... Question for you . Possible to print in two pieces ? Ghost and stand ..... So i could print one red and one white ? Thanks and keep posrting . 👍😎
When you're masking, how precise are you on lines? I've found when trying to hug an edge it's rather inconsistent and I'm having a hard time keep straight lines.
when trying to hug a edge I like to go over the line and then use a very sharp knife and ruler to cut the masking tape to where it should be. hope this helps
Old school power ranger helmets, mega man helmet, Theres any thing from this guy (pay for stls) www.malix3design.com/?m=1 Infinity gauntlet Any thing avenger (you did the hulk one time)
@@FilamentForge cool , ,so a lot of cool projects for the future, good luck Mate.Your vidéos gave me the motivation to buy a small 3d printer , so I have to say Thank you for that too , it comes from the hearts
Jim Allen I like to use 80 grit to get rid of layer lines then 120 to smooth and after that high build primer then wet sanded with 800 grit this method gives a good finish
0.02 mm are you sure ?????????? the most advanced 3D printer can get up to 50 um at most ! 34 hours for this ...... well buy an other printer ! I printed very very small gear (1.81mm !! height) and it took me 2.30h !!! at 0.05mm layer height !
I printed one of these two feet across. Just needs a little smoothing and painting before putting it up on the wall. Love it!
You sir are a very patient man. I think I would have given up after the first minute and a half of masking! Nice work!
luckly there is a v2 of this file now in 3 parts to print and paint and then assemble
Great job! I like this very much cos this is one of my favorite films (the one from 1984). Very cool, I will print this soon, for sure.
like the smiley slowly ghostly fading away from 0:45 :)
Very nice job, love your art, but sadly this video i had to watch it mute coz the music is so stressing, perhaps something less noisy for next videos
Great build
Amazing
Hi filament forge, can i make you a question? Wich printer do you use, i like your prints very much, and im kinf of new in this things of 3d printing,
wanhao d5s
I really like your job!! Just a question, It was 34 hours straight? Can't your print get overheated or something like that
yes 34 hours straight and no my printer wouldn't overheat cheers
What next you go to make 3D print of the loud house changers with 3d printer can you do now please.
Hi and thanks for the video . Helps a bit with the in betweens ...... Question for you . Possible to print in two pieces ? Ghost and stand ..... So i could print one red and one white ? Thanks and keep posrting . 👍😎
yes I didn't know until after I printed it that there's a split version here's the link
www.thingiverse.com/thing:2257297
When you're masking, how precise are you on lines? I've found when trying to hug an edge it's rather inconsistent and I'm having a hard time keep straight lines.
when trying to hug a edge I like to go over the line and then use a very sharp knife and ruler to cut the masking tape to where it should be. hope this helps
A ruler! BLIMEY! How have I never thought of that? Thank you much! I'll give it a shot
Do you remember where you got this version of the Ghostbusters music?
its on youtube just search for ghostbusters remix
I also do alot 3dprints and finishing, wondering if you were looking any ideas for a few videos?
Also I see you do alot of masking with tape, have you tried silly putty? It will be your friend for ever
No I haven't tried silly putty yet will have to give it a go what idea have you got for some videos?
Old school power ranger helmets, mega man helmet,
Theres any thing from this guy (pay for stls) www.malix3design.com/?m=1
Infinity gauntlet
Any thing avenger (you did the hulk one time)
there some good ideas thanks for sharing l have put them on my to do list cheers
0.2 layer height or 0.02? Seems like it would take weeks at a tenth of the layer height?
0.2 just a typing error
Another awesome one. Can do you recall your printer settings? Thanks!
I use the default wanhaomaker slicer setting L/H .1mm 8% infill 50mms and minimal support hope this helps
Cool thing ever
Hey filament... Can u do a wwe championship belt plate.. I wanna buy a machine but wanna see if the machine can print it. Thanks. Let me know
did a little search and there isn't any good stl file out there
Filament Forge 3dwarehouse.sketchup.com/model/d480cc6a-6b7e-49c9-a3ca-9bc6e50fe38e/WWE-Championship
Newfie4Life I had a look and it's a skp file so I'm not sure if it can be converted to a stl file
Filament Forge well thanks for checking... Would be cool if it can be done. I'm impressed with all your work.. Keep it up
Nice work!
nice work
nice work ... Again ;) .
Thanks pal might print a bigger one now that I have a bigger 3d printer
@@FilamentForge cool , ,so a lot of cool projects for the future, good luck Mate.Your vidéos gave me the motivation to buy a small 3d printer , so I have to say Thank you for that too , it comes from the hearts
@@stephyweedy that's nice to hear have fun printing 👍👍
what 3D printer are you using and softwere
wanhao d5s and wanhaomaker slicer
Filament Forge thanks
Ghostbusters 3 afterlife was delayed to March 5th 2021 because of the coronavirus pandemic and you need to be patient please.
Thats the propper order of sand paper? I mean sand it in that order?
course to fine I like to do 80 grit to 120 grit then maybe a primer wet sand
i like it
Hi all new too 3d printing was grade sand paper you using to do your prints
Jim Allen I like to use 80 grit to get rid of layer lines then 120 to smooth and after that high build primer then wet sanded with 800 grit this method gives a good finish
Filament Forge many thanks for the help
I wish I had one
If I were to slip you some Patreon money, would one of these show up on my doorstep 😉
0.02 mm are you sure ?????????? the most advanced 3D printer can get up to 50 um at most ! 34 hours for this ...... well buy an other printer ! I printed very very small gear (1.81mm !! height) and it took me 2.30h !!! at 0.05mm layer height !
its just a typing error was 0.20 at 40mms
Awesome vid but the music was so famn annoying, could you've put on something else?!