Radiator repair and restoration
HTML-код
- Опубликовано: 15 сен 2024
- I bought an electric #radiator on a local website for $20. It's an old simple Siemens design. Once often used in households. I started the #repair of the by searching for the spiral because the one inside was damaged. Unfortunately, I couldn't get a suitable high temperature logo sticker, so I decided to do it in the form of a template. The radiator will serve as an exhibit, especially since electricity is very expensive today 😀
I invite you to my channel
/ @myrepairs1
REALLY GOOD WORK !!!!!!!!!!!!!!!!!!!!!!!
Thank you very much Greetings
*_There's just something magical about watching something that was so old and broken being restored back to looking so new. Its such a thing to watch. ❤_*
Wow, that is an awesome job you did restoring that old radiator. It looks like a brand-new appliance, and it works like a charm, too. Excellent work as usual.
Thank you very much Greetings
You are the one off the best to repaire Old Think 🙂👍🇩🇰
Every time I see a video like this it reminds of how dangerous old household electrical appliances used to be.
I had that thought too. If you go to the trouble of restoring such a device, you should completely replace the electrical system, i.e. also install a protective earth conductor and replace the open wires with insulated ones. In this condition, the device is life-threatening.
@@karsten0023
If it’s being restored for display you’d probably want to keep it original.
Modern devices also have anti tip over switches to automatically turn the heater off if it should fall over. Little wonder there were so many house fires back then.
It's true that it's very easy to get burned or electrocuted.
You are right, however, this device will not be used as intended, but rather as an exhibit.
Excellent restoration. Thank you.
However, being a metal case, it should have a ground or Earth connection for safety. This is something that would not have been on the original but which should be fitted for protection against a live case.
You're right it should be grounded. Regards
So you only installed the one element. Somewhere they have to have the ceramic to replace the other one that was broken... Could even go to a ceramic hobby place and have them make one for you. Just a thought. Thumbs Up!
This was enjoyable to watch, great work!
Thank you
It's looks real good after renovation, good job my friend. 👍👍
Thank You
Great looking restoration and you did a wonderful job restoring it!!!
Enjoyed your video and I gave it a Thumbs Up
Thank You
Sei BRAVISSIMO!!! 💯👍
Провод для внутренних соединений нужно было взять в термостойкой изоляции. Оголённая медь не выглядит безопасно в сетевом устройстве.
Куда делся второй режим работы обогревателя?
Верно, керамическую изоляцию нужно применять!
Раньше не было таких защитных требований, как сегодня, и менять концепцию производителя не хотелось.
@@MyRepairs1 Я вспомнил в СОВЕТСКОМ СОЮЗЕ ПРИМЕНЯЛОСЬ В БЫТОВОЙ ТЕХНИКИ!
@@MyRepairs1 в Утюгах, калориферах, вафельницах и Т.Д.
Now that's something that's built to last, I mean, ceramic heating elements are rare nowadays.
You're right, it's not used anymore
Insulate copper wire from fiber glass sleeve
Good job
Well done but number 1 and 0 near siemens still in red will be better in black
it has been beautifully restored but the patina from age is now missing.
Very nicely done as expected. Funny side note, I heard your washer in the background, and I have the same make. I thought my laundry was done too quickly. 😆
it's my wife who sometimes plays jokes on me or turns on the laundry or comes to ask me something during the recording. 😆😆😆
@@MyRepairs1 That is funny. 😁
Where is the footage of the heater ceramic cylinder repair?
Use insulation on wire
I also have a Samsung washer and dryer. 😉 (Listen at around 4:00)
awesome, great job….🔧🔩⚒️🛠️⛏️⛏️🔨👍
Thank You
Dobra robota 😊
4:11 I'm really curious how did you fix the broken coil stick
The coil was replaced with another one. I thought it showed in the video.
Greetings. great job. What camera do you record video with?
Thank you. My camera is a Canon PowerShot G7X Mark II
سوألي لحضرتك هل هذه الاصباغ تقاوم الحرارة تحياتي لك 🌹ومانوعها
نعم ، إنها مقاومة حتى 800 درجة. يعتبر
This is not radiator. It's a room heater
normal filler is not good for hi temp!
That's right, that's why I used "Novol Termo"
U mojego ojca jest jeszcze identyczny grzejnik - dużo ciepła daje
To prawda że można się ogrzać jednak nie na dzisiejsze czasy przy cenach prądu🙄😀
Pozdrawiam
👏👏👏👏
👍👏👍👏👍👏👍👏👍👏👍👏
👋👋👋
Better get your washing out of your Samsung machine😂👚👖🩲🩳👚
😄😄😄
U wanna make die someone