I watched every step of this build and the race day. Watching this back on this video reminded me how much work went into the mongoose and what an awesome job you guys did. Keep up the great work guys. Can't wait to see you finish the skyline. You have a big fan from across the pond. Love your work and videos
I think Tim Kuniskis’s reaction said it all. You also may have gotten some engineers at Dodge fired for not getting this done themselves. Awesome car guys.
Love the viper even though it's a death trap! It would be the only car I'd buy just to look at. Maybe drive around the block every once and a while. Other then that id be terrified to get in one.
@@grimreapergaming3061 I'm not too sure but I think it's the V8 because it's newer, makes more power in stock form and probably still has more power when both are maxed, might be lighter and stronger too, don't quote me though.
@@slapdasharbitrary considering vipers from calvo are making anywhere from 1-3k horsepower and he's still shooting for more and I've personally seen stock hellcats throw a rod racing its definitely not stronger or higher horsepower producing when modded. I will concede on the weight though
Great build. This is the version where everything pulls together without issue or debugging. Still it is a pretty cool car. Lot's of reliable HP. New clutch, brakes and suspension means with some tuning it could be dialed in pretty well. Love to know how it is to drive on the road without the MT tires.
@@jimmyqballs also have a 2000 GTS. Getting scarce for parts for sure. Makes me contemplate ownership, but it was my dream car growing up. Took me months a 2k to find a windshield last summer.
Throtl VIP squad good morning Evan Quinn Mickey Rickie Rick victor Shawn Will Nate Tim Big Jeff and the rest of the team awesome breakdown build of the Hellcat redeye viper 😄👍🏽🤙🏽♥️
this is From episode 1. to uninstallation of components to continue to the next episode to the installation of the latest components including the replacement of new Tools. up to the 8th episode and testing On the circuit. to get a problem in the forefoot. And after being seen by brother Quinn, finally all problems can be solved by the Thortl Team in the Dodge Viper car. until the event that will be ready to be carried out immediately by fans of speed competition is also carried out. And the Thortl Team were all very enthusiastic about holding the event. I'm a fan of Team Thortl always supporting And following all the videos that Team Thortl make And once again congratulations to Team Thortl for your work And all Team Thortl must say party. greetings from Ambon Maluku Indonesia brother Thortl Team God bless you all...
Would have much preferred to see a Gen 5 Viper V10 swapped in but this is cool too as an exercise. Could have just turned the stock v10 and made 1k hp if that was the goal but it wasn’t. Great skills gents.
@@VahishtHimself - Oh, I knew it was a joke. Was just clarifying that we literally did the motor mounting in one long work day. Im still astonished and wanted to brag a little. :-)
I would have kept that V10 for this event and just built onto that the Viper engine would have made twice the power then those Hellcat Redeye engines the Viper Engine is still the most powerful N/A engine Mopar has, I'm against swaps cuz I love when people take the engine that's already in their car and build onto that instead otherwise just buy the car that has that motor u like already in it but this car was awesome at Roadkill nights it took second against Winston's 1500 Challenger but it gave it a serious run for it's money only having like 850 hp very impressive
My first favorite car . I would draw it everyday till the point my classmates would line up for me to draw them that blue Dodge Viper with white stripes … I definitely want this car. I’m still a fan of dodge till this day. Thought about buying one and swapping it with a red eye .
sorry if this is a dumb question but im pretty new in the car community and have been watching throtl and all their sick builds but im wondering, are they a performance shop that people can take their car to and theyll work on it? because it seems to me that they are mostly just a online store for parts and they do the performance work on the side. i guess what im asking is are they a shop i can just take my car to?
Hey guys you are doing a great job over years and what i want ask is how do you choose the engine parts how can you understand that part will be fit in the car ?
Couldn’t imagine under $40k unless you get used engine and parts and do work with you and buddies or know a guy who will swap for a good deal. My limited knowledge I’d assume nearly 10-20k for the motor several grand for labor and whatever extra for fitment/custom parts
Okay, so the header question is finally answered, and the answer is shorties. The remaining question is "Are they equal length shorties, or fitment only shorties?"
Hey guys, I was about to order the T-shirt with the 2JZ on the back, and the black hoodie with red "Throtl" and some Asian symbols, (as well as the orange hoodie. maybe more.) I had saved the web pages in my favorites to place my order later // that is now. Except that suddenly there no more Throtl clothes on your site... I was wondering if the products will be back in stock? My regards from France ! Stay the course
I've been waiting for the prize draw And almost 1 month there has been no clear answer from the Throtl Team. And I, as a big fan of the throtl team, are waiting for confirmation about the draw..
@@drkangel1134 - I wouldn’t say it’s simple by any means but, you use what’s supplied with the kit. No additional cluster is required. Now that we have the car back we will be buttoning it up (I.e. making the OEM gauges work).
To the people in the comments...PLEASE BE CAREFUL there are scamers pretending to be from the #throtl family sending you stuff that you won a random selection!!! So please don't give inn or any info of your personal behalf unless is CERTIFIED BY #THROTL
![Building a TESLA SWAPPED 350Z in 27 minutes! [COMPLETE TRANSFORMATION]](/img/1.gif)
Time to squeeze the v10 in a Miata
Time to squeeze it in a Yugo
@@realspeedghxst that would be awesome!
Lmfao it do be like that
Miata sounds so cool but imagine they mate it to an AWD system
@@theilest33 that would be suck
I watched every step of this build and the race day. Watching this back on this video reminded me how much work went into the mongoose and what an awesome job you guys did. Keep up the great work guys. Can't wait to see you finish the skyline. You have a big fan from across the pond. Love your work and videos
As much as I love these videos, I need a review/final thoughts from everyone at the shop!
This is my biggest problem with this channel. whenever the build is over they never really go out and test it
Seeing Ricky blast past the haters was so satisfying
I think Tim Kuniskis’s reaction said it all. You also may have gotten some engineers at Dodge fired for not getting this done themselves. Awesome car guys.
This is my favorite build I’ve ever seen. I wanted to do this so bad, but I don’t have enough money and knowledge to do it. 10/10
Love the viper even though it's a death trap! It would be the only car I'd buy just to look at. Maybe drive around the block every once and a while. Other then that id be terrified to get in one.
I love the Dodge Viper, it is the quintessential reckless raw danger/power car of every guys dreams. Great build gents.
Until the Carrera GT arrived
yall make everything look so easy and especially when it turns on first try it just surprises me it’s amazing keep up the great work💯
My favourite moment of this build was when the CEO of dodge was speechless to how you installed the hellcat motor into this car.
Which is surprising considering the viper engine is much bigger
@@arcticwolf8150 it's because of the supercharger, so fitting the hellcrate in a not so vertically spacious enginebay was tight
@@slapdasharbitrary I’m curious which has more power,acceleration and top speed the v10 or the v8 ?
@@grimreapergaming3061 I'm not too sure but I think it's the V8 because it's newer, makes more power in stock form and probably still has more power when both are maxed, might be lighter and stronger too, don't quote me though.
@@slapdasharbitrary considering vipers from calvo are making anywhere from 1-3k horsepower and he's still shooting for more and I've personally seen stock hellcats throw a rod racing its definitely not stronger or higher horsepower producing when modded. I will concede on the weight though
I've watched every episode of the build plus this one, I can't get enough!
That's not a Viper anymore. It's a Dragon 🔥
Great build. This is the version where everything pulls together without issue or debugging. Still it is a pretty cool car. Lot's of reliable HP. New clutch, brakes and suspension means with some tuning it could be dialed in pretty well. Love to know how it is to drive on the road without the MT tires.
Definitely one of my favorite builds from throtl🔥
this ties with the 335i you all built. Absolute Beast of a car and amazing engineering! crazy power in a light slick car! Beautiful car very amazed
As a gen2 Viper owner, Im impressed. I wanted to hate this build. But it turned out amazing. Great job boys!
@@jimmyqballs everytime it hurts LOL. Looks like by the roadkill nights they got the hood to bumper gap tightened up
@@jimmyqballs also have a 2000 GTS. Getting scarce for parts for sure. Makes me contemplate ownership, but it was my dream car growing up. Took me months a 2k to find a windshield last summer.
Throtl VIP squad good morning Evan Quinn Mickey Rickie Rick victor Shawn Will Nate Tim Big Jeff and the rest of the team awesome breakdown build of the Hellcat redeye viper 😄👍🏽🤙🏽♥️
Such a great series. Can’t wait to see you guys build a 740i one day.
this is From episode 1. to uninstallation of components to continue to the next episode to the installation of the latest components including the replacement of new Tools. up to the 8th episode and testing On the circuit. to get a problem in the forefoot. And after being seen by brother Quinn, finally all problems can be solved by the Thortl Team in the Dodge Viper car. until the event that will be ready to be carried out immediately by fans of speed competition is also carried out. And the Thortl Team were all very enthusiastic about holding the event. I'm a fan of Team Thortl always supporting And following all the videos that Team Thortl make And once again congratulations to Team Thortl for your work And all Team Thortl must say party. greetings from Ambon Maluku Indonesia brother Thortl Team God bless you all...
hands down throtl the best and legit on youtube!
I'm tryna see more of that z06
You guys did great! Getting the attention of Tim, That's 'hella exciting! Dodge Viper FTW!
Did anyone else gasp when the dude dropped the front fender at the beginning?
Yall should take the viper engine n make your own version of a ram srt 10 “shop truck” with it, i personally think that would be sick lol
Ricky was buzzing. Great build 👏
The result for the amount of time you guys had is insane--great stuff!
Corvette time 😎😎 cam and supercharge it please!
Love it when you guys upload! Keep it up! Also super cool car! 🏎
Me: watched every single viper build video as they dropped
Also me: watching this recap as if I didn’t watch it as it progressed
this car is so special, give the chills like no other.
Especially since this car performed so well at the Roadkill Nights event in Detroit.
@@krismangila1594 simply amazing, hope to see more of it.
beast dodge viper!!!!!
I would love to see what you guys would make with a g body!! My favorite style car!!
what are going to do with v10 engine
Oops should have put the oil Pan 1st then the motor mounts So it flows with the video.
Sup throtl team! Hope yall doin good and drinking plenty of throtl juice baby!! 😆😆
I would love to see Throttle make this into a proper street/gt sportscar and not just a drag car. Great job overall.
So ya took a deadly viper and made it deadlier🤣🤣💪🏻💪🏻🔥🔥NIIICE
Would have much preferred to see a Gen 5 Viper V10 swapped in but this is cool too as an exercise. Could have just turned the stock v10 and made 1k hp if that was the goal but it wasn’t. Great skills gents.
POV: You watched the 8 videos of the build and still watch this one also
i hope y’all use that v10 for something else, either some cool like a supra mk5 or something absurd like a miata😂
The tunes is this video are dope
Good Job guys !
Im beyond amazed just how well the car works, especially if you managed to swap the engine in 20 minutes
Definitely took longer than 20 minutes 😂
@@IFuckingHateWhales yeah 22 min and 10 seconds 🙄
Took about 12 hours real-time.
@@mickeyandrade3435 let this be a lesson for me that i need to make my jokes more obvious next time :D but anyway, love you guys and your videos!
@@VahishtHimself - Oh, I knew it was a joke. Was just clarifying that we literally did the motor mounting in one long work day. Im still astonished and wanted to brag a little. :-)
Just got my new fog lights, thanks to everyone behind the scenes!
Now we need the 10 minute Timelapse
Do you guys have any further plans for this build?
that hood gap is killin me
I liked how the CEO of Dodge came over was talking to you guys about that I was pretty sweet
I think the v10 should go into a Prius
y’all need to put the V10 in 1970 charger
I would have kept that V10 for this event and just built onto that the Viper engine would have made twice the power then those Hellcat Redeye engines the Viper Engine is still the most powerful N/A engine Mopar has, I'm against swaps cuz I love when people take the engine that's already in their car and build onto that instead otherwise just buy the car that has that motor u like already in it but this car was awesome at Roadkill nights it took second against Winston's 1500 Challenger but it gave it a serious run for it's money only having like 850 hp very impressive
That thing is Sick 🔥
Put the V10 in a Miata and then give it a Viper Bodykit. It would be hilarious
My first favorite car . I would draw it everyday till the point my classmates would line up for me to draw them that blue Dodge Viper with white stripes … I definitely want this car. I’m still a fan of dodge till this day. Thought about buying one and swapping it with a red eye .
Great choice, gorgeous car. They don't make 'em like that anymore.
This is my dream car ❤
Do you all have a link to those wilwoods, I need a set. And the wheels to pleaseeeeeee. Thank you.
Time to build a fast compact engine in a smart 451 car!!
I hope that V10 goes to a good home
sorry if this is a dumb question but im pretty new in the car community and have been watching throtl and all their sick builds but im wondering, are they a performance shop that people can take their car to and theyll work on it? because it seems to me that they are mostly just a online store for parts and they do the performance work on the side. i guess what im asking is are they a shop i can just take my car to?
Did you keep the V10 for a future project???
I love your content,
minus the whole "Im 40 years old still fucking around with Tik-Tok hype and editing techniques." vibes.
Today I learned that Gen 2 Vipers employ the use of 6 lug bolt pattern wheels. That's cool and weird at the same time lol like why?
No drag or dyno numbers yet? Amazing build!
Dyno numbers are on one of the build videos.
Now let's see you guys do a hemi swap into a Plymouth Prowler.
We almost did that. Sadly, the rear ends in those cars are like glass. Once we came to that realization we changed our focus to viper.
@@mickeyandrade3435 Oh ok but did you realize there is an updated gear and chain set for the prowler rear end?
Hey guys you are doing a great job over years and what i want ask is how do you choose the engine parts how can you understand that part will be fit in the car ?
Ricky did so freaking good on those dargs, well done Ricky , you nailed it :)
Why is that pan so low? Did they want you to crack it open on a speedbump?
If I wanted to do this build on a 2003 SRT10 Viper, what would it cost me for this total build?
Couldn’t imagine under $40k unless you get used engine and parts and do work with you and buddies or know a guy who will swap for a good deal.
My limited knowledge I’d assume nearly 10-20k for the motor several grand for labor and whatever extra for fitment/custom parts
@@Sheridantank That's not Bad at all. 👍
Mmmh i would say like 50k
Did you Dyno it? And if yes where can we see that?
Put that motor n a S10 r spec 😈🤤🤤💯
So what you guys gunna do with the v10
Taking a V10 away and giving it a V8 is like removing 1 ball from your sack
Hello throtl boy's, you guy threw down !!!!
Put the v10 into a Tesla you guys will be the first to do it i know someone has already done a v8 swap
Okay, so the header question is finally answered, and the answer is shorties. The remaining question is "Are they equal length shorties, or fitment only shorties?"
Hey there was a Dodge Viper in Fast and the Furious Tokyo drift
Hey guys,
I was about to order the T-shirt with the 2JZ on the back, and the black hoodie with red "Throtl" and some Asian symbols, (as well as the orange hoodie. maybe more.) I had saved the web pages in my favorites to place my order later // that is now.
Except that suddenly there no more Throtl clothes on your site...
I was wondering if the products will be back in stock?
My regards from France ! Stay the course
I've been waiting for the prize draw And almost 1 month there has been no clear answer from the Throtl Team. And I, as a big fan of the throtl team, are waiting for confirmation about the draw..
Do you think a automatic would fit in the viper or would you have to create a new tunnel? That would be the ultimate Viper.
🤢🤮
It's hard for me to believe that a V8 is actually better than the 8.4 liter V10 that was already in there. Doesn't add up # Backwards!!!!
Believe it. We just doubled the horsepower by putting in the blown V8. It’s real! 😀
@@mickeyandrade3435 He'll with it! Put the Grand National V6 turbo in there next.....!!!!!!
Less is more!!!!! V6 baby!!!!
Show all car collection
Now do a build on the V10 and drop it into something stupid. Maybe a mid engine kit car. Hmmmmmm! Maybe something from Factory 5.
I appreciate these videos! BUT mind out, couple RUclips Channels are getting shutdown for reusing already posted footage.
We’ve been doing this model for more than 5 years. If YT had a problem with it they would have let us know long ago.
I’m confused. Did you have a custom harness made to go to the ecu? Or is it hellcat harness and viper body harness?
Hellcat crate ecu and Viper chassis harness.
@@mickeyandrade3435 it’s that simple? No splicing, no need to use a hellcat cluster
@@drkangel1134 - I wouldn’t say it’s simple by any means but, you use what’s supplied with the kit. No additional cluster is required. Now that we have the car back we will be buttoning it up (I.e. making the OEM gauges work).
@@mickeyandrade3435 still seems a lot simpler than most swaps wiring wise that is
throtl fans❤❤❤❤❤
So would this beat a stock V10 Viper? I wanna see that race.
Yes. No question. It has twice the horsepower, better suspension, and race tires.
@@mickeyandrade3435 sick, what does it the supercharger?
We want Omni
You should put the v10 in a hellcat
Best build on RUclips hands down
Trac-Pak V10 Challenger?
I wanna put a v10 in my 240 one day not a little Miata no offense.
this is so weird being decently early here
Put the V10 in a 2016 Chrysler 200
Fix the gap between the hood and the bumper pleaseee 😅😅😅 little bit annoying for me
I think lots of people in the comments have been complaining about it for a while lol. Such an eyesore
Throw the Viper V10 into the R32 GTS-T lol
To the people in the comments...PLEASE BE CAREFUL there are scamers pretending to be from the #throtl family sending you stuff that you won a random selection!!!
So please don't give inn or any info of your personal behalf unless is CERTIFIED BY #THROTL
Hello crew I sent email about this built, want info about v10. thank you guys.
Put the v10 in another car now. Something small
Please take the old drivetrain and put it into something Jdm AF. Time to make a troll build