Zenitco B-33. It must be used with handguard like B-10M for installation. But in this clip, the dust cover is replica(brand name is LCT) not real Zenitco product.
How much money would i need for this gun, not including the cosmetics, only the alterations to the gas system and the stock base? Also is it possible to have the gas tap trought the pistol grip independently of the magazine?
You will need for this airsoft gun about 500$ exclude the cosmetics. High-Pressure Air(HPA, alternation to the gas system) will cost about 300$~400$ it would be cost less or more according to your choice about tank, regulator, remote line...etc Some people tap through to the pistol grip. But I think that way is more difficult to use and I don’t know how to do that. I recommend you to tap to the magazine.
@@Anelaceelfead auch, i just though on using the money and i think it was enought to empty my pockets. Is there any other base gun that i could do these same alterations but cheaper? A 900 dolar build is a bit too much for me. Or should i just stop being poor?
@@wtwarrior7698 It will be cheaper about the HPA system-like buying tank and regulator and whatever by AliExpress. but I used much more money since for safety.(It maybe save 100-200$, maybe?) I think there is no alternate airsoft gun for AK. When you use HPA system, the most important thing is safety. GHK AK series are very durable and it can use CO2. Another AK airsoft gun(like VFC, Tokyo Marui, WE tech...etc) is not durable than GHK AK series. and the magazine will be explode you would be take heavy injury. I forgot to say...when you use HPA system. You need a compressor to recharge the tank. It takes over 200-300$. The high pressure air is not created naturally, yes. Yes. HPA system is very very expensive. However, it has benefits that the gas system doesn’t have. It is your choice and I don’t regret to build HPA system. :)
@@Anelaceelfead oh man i am sure i wouldnt regret either but i am not in a position unfortunely to spend the money, mainly cause in a year i might have to decide if i move out of the country i m in or not. And i am kinda hesitant. The build is amazingly cool though. Thats preatty much my dream airsoft rifle(unless they make a an94 hpa some day)
@@wtwarrior7698 Thank you:) If you move to outside from your country, that must be cost pretty much. And the law of airsoft rifle must be different... then how about the buy airsoft rifle first? You can build HPA system later. also, the best way is save money for unclear future :) It seems GHK AK series are still popular and will not be discontinued for years.
Wow! Thats a hard kick!
So sick man!! Pretty realistic rof
Does it have full travel kit?
Yes, full travel kit used.
hey dude whats the name of that dust cover with rail?
Zenitco B-33. It must be used with handguard like B-10M for installation.
But in this clip, the dust cover is replica(brand name is LCT) not real Zenitco product.
How much money would i need for this gun, not including the cosmetics, only the alterations to the gas system and the stock base?
Also is it possible to have the gas tap trought the pistol grip independently of the magazine?
You will need for this airsoft gun about 500$ exclude the cosmetics. High-Pressure Air(HPA, alternation to the gas system) will cost about 300$~400$
it would be cost less or more according to your choice about tank, regulator, remote line...etc
Some people tap through to the pistol grip. But I think that way is more difficult to use and I don’t know how to do that.
I recommend you to tap to the magazine.
@@Anelaceelfead auch, i just though on using the money and i think it was enought to empty my pockets. Is there any other base gun that i could do these same alterations but cheaper? A 900 dolar build is a bit too much for me. Or should i just stop being poor?
@@wtwarrior7698 It will be cheaper about the HPA system-like buying tank and regulator and whatever by AliExpress. but I used much more money since for safety.(It maybe save 100-200$, maybe?)
I think there is no alternate airsoft gun for AK. When you use HPA system, the most important thing is safety.
GHK AK series are very durable and it can use CO2.
Another AK airsoft gun(like VFC, Tokyo Marui, WE tech...etc) is not durable than GHK AK series. and the magazine will be explode you would be take heavy injury.
I forgot to say...when you use HPA system. You need a compressor to recharge the tank. It takes over 200-300$. The high pressure air is not created naturally, yes.
Yes. HPA system is very very expensive. However, it has benefits that the gas system doesn’t have. It is your choice and I don’t regret to build HPA system. :)
@@Anelaceelfead oh man i am sure i wouldnt regret either but i am not in a position unfortunely to spend the money, mainly cause in a year i might have to decide if i move out of the country i m in or not. And i am kinda hesitant.
The build is amazingly cool though. Thats preatty much my dream airsoft rifle(unless they make a an94 hpa some day)
@@wtwarrior7698 Thank you:)
If you move to outside from your country, that must be cost pretty much. And the law of airsoft rifle must be different...
then how about the buy airsoft rifle first? You can build HPA system later. also, the best way is save money for unclear future :)
It seems GHK AK series are still popular and will not be discontinued for years.
니플 가공해서 장찾하셧나요 ?저도 ghk m4가지고 잇는데 탄창 하단부에 잇는 큰 나사선에 맞는 니플을 찾을수가 없네요 ㅠㅠ
일반적으로 HPA를 사용하기 위한 탄창 가스탱크 캡의 나사산에 맞는 커플러는 존재하지 않습니다. 따라서 탄창 가스탱크에 드릴링 후 나사산을 내어 커플러를 결합하는 것이 필수라고 봐야죠.
Do you have a link to the hpa magazine?
I didn’t buy hpa magazine. I worked to gas tank cap of GHK gas magazine myself.