i got myself 24 pieces a week ago, put them on a flat wall with 6 TESA Posterstrips on each Panel. Works fine and i can remove them without damaging the Wall.
This is EXACTLY what I was looking for OMG!!! I saw a church stage where they installed 3D paneling on the back wall to their stage, then added a Video Wall, MH lighting and WAHLAH!!! A REAL GAME CHANGER AND VERY COST EFFECTIVE!!! THANK YOU SOOOOOOOOOOOOOOOO MUCH! Luv U
I have put up the exact same wall for behind my 98inch Samsung. Using a normal hand held grinder with a general purpose blade works much better for clean cutting and precise shaping and minor adjustments. I used long rolls of white 3m double sided tape along all vertical and horizontal edges not in the middle. As the tape was white I was able to put to adjoining panels over the middle of one tape run meaning there was white tape behind and tiny gaps in the panel joins. No need for calking and the panel fit was tight and perfect
After your review I bought the Immersion kit (loving it), bought 2 times the Dreamcolor 5m RGBic light strip (5m) and now I think I'm gonna upgrade my TV setup with these 3D wall panels too :) Stop it man...stop it... :D
Your comment literally made my day. Absolutely hilarious. I literally broke a sweat making this one, with removing so many panels, shooting and reinstalling, so I’m really glad that you found it helpful! Thank you for your support!
-lol you spoke for all of us man. about 5min into this video my wife walked in the room, seen what I was watching and then said she just placed her order. its even more funny because she got on me for ordering the immersion 2.0 and both govee lamps. lol
Literally just ordered the Govee Smart LED light bars, Govee Glide lights, and 16ft of the RGBIC light strips and then I saw this haha. I have black foam squares right now but these are going to look way better.
Hey man, I don’t have a single source to recommend unfortunately, I find them from a lot of search work. Here is a good one to try with your set up! ruclips.net/video/Dji7czwpwGI/видео.html and thank you on the TV. I love the CX! I hear really good things about the C2 2021 model as well, though it does not get as bright
@@MrTekSuggest ya I’m getting one of those. I’m trying to figure the difference between it and the C1. Price is the same but the X looks better. I have an eye for video and an ear for sound. That’s why I love your channel. Hands down the most satisfying site I’ve seen on the RUclips. Do you use a sound bar for your audio? I guess I can look and see. There are a couple quality ones out there. Thanks again
@@daniel243ish Gotcha. The C1 is actually about 4/5 hundred dollars more than the CX. And I appreciate it! Also my sound bar is actually pretty dated and I need to upgrade my audio soon!
bro your walls look perfect for just adding led strips in those gaps and then add a diffuser strip on top, are the walls like that for any particular reason or just the style?
Another great video. I definitely need these panels 'cause my wall is flat white. They remind me of a short throw flashlight design or even the old F-117 stealth fighter how they deflect the light.
I recommend to buy 4x8 1/2 foamboard or gatorboard an install the panels to that with velcro and simply hang or screw 4x8 p. to the wall . Easy to remove and adjust....
Do you think 3m adhesive would be good for sticking these the wall? My other idea was to use Velcro command strips but cut them skinny so they can stick to the panels
I have a 77 inch wall mount and don't want to take the tv down to do this. Could i get away with having the panels be only like 4 inches behind the tv on the sides? Don't have back lighting yet.
I really like this project and considered doing it myself last year but after calculating my wall space found it was a little too pricey for me. How high and wide did you go with the panels? Did you take it to the ceiling and how far left and right of the TV? Thank you
Hey there, my project area is 8FTX 4.5FT. The panels are about 4 inches away from reaching the ceiling at the top. My TV is 65 inches, so there is about 20 inches on each side and 15 inches on top and bottom, from the edges of the TV to where the wall panels end
That’s a good question! For 32 sq feet, 2/3 packs should do the trick if you cut them as shown! But it’s a safe bet to order an extra pack to be on the safe side.
Have you ever done a video with your suggestions of how to find "AWESOME" 3d screensavers. The backgrounds that you use while diy'n and showing us how to do something are really different and unique. Many are good enough to want to have a slow music type of soundtrack to go with them. Like cosmic relaxation videos. Do you have a place where you go to find them? Thanks for your vids by the way. Informative.
Hey there, that’s a great idea for a good video down the road! Unfortunately I cannot recite a specific location that list out the material. Lots of hunting, digging and poking around for the perfect saver! Thank you for watching!
i like it but , i think that you need to remake the joints , try some white silicon , or some type of white paste for the unions , i can see where the panels unite and it's a little ugly :) but it's ok .
Thanks for watching! I've used silicone based caulk in the past, which I captioned. I experienced cracking and yellowing over time, which started to look pretty bad to say the least
I would try this in home, but I. Need to decide what tv wall mount buy I bought a 75 inch samsung tv q8dt like 95 pounds can someone tell me what full mount tv ?
I primarily use video part, mode probably 8 times out of 10. Check out this video here for more details on my setup: ruclips.net/video/nnyyvYFwip4/видео.html
@@MrTekSuggest Thanks. I did watch that video also. I use video mode to capture the screen colors but I noticed with its on partial it tends to go back to blue and purple on the bottom right side like a default. But when I go to full screen the color matches nicely. But partial changes color more to match.
Looks great but... If you use a circular saw it will destroy the panel 🤦🏼♂️ unless you turn the blade around or run it backwards through a table saw 🤷🏼♂️✌🏼
Good info on these panels I've seen them never knew were to get them .the wall you covered wasn't cheap . Tin snips might be easier to handle cutting panels if you don't have hedge cutters . Great informational video. Thanks for sharing
Appreciate it! Really good tip on the tin snips. Bet that would also work really well for fine cuts. One of the biggest pros for the hedge shear, is how large of a cut you're able to get with one single motion. And you're definitely right about my slat wall. I remember being really hesitant to cover it up a while back, but I just wasn't getting the reflection I wanted with my LEDs. I also have this slat wall on other areas of my studio, so I still get to enjoy it:)
@@MrTekSuggest how many in today's age of modern technology would you say own a pair of those manual hedge trimmers ? You are showing your age as I am . Many younger people don't even know how to use a rotary phone if given the opportunity. Our times when we grew up are caveman to the much younger generation. Just a fun fact lol
Love my slat walls, that’s why I had them installed! But they do not reflect light in the slightest! I still have my slat wall uncovered by panels in several areas of my studio, so I still get to enjoy it
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
Damn, just when I thought that I had finished my “man cave” I stumble across your vid, amazing look and on order already. Thank you.
Appreciate it, & Nice! That sounds like perfect timing!
i got myself 24 pieces a week ago, put them on a flat wall with 6 TESA Posterstrips on each Panel. Works fine and i can remove them without damaging the Wall.
Nice!
What are poster strips
This is EXACTLY what I was looking for OMG!!!
I saw a church stage where they installed 3D paneling on the back wall to their stage, then added a Video Wall, MH lighting and WAHLAH!!!
A REAL GAME CHANGER AND VERY COST EFFECTIVE!!!
THANK YOU SOOOOOOOOOOOOOOOO MUCH!
Luv U
Awesome! Glad it came in handy!
Excellent review and tutorial! Such a soothing and clear voice!
Subbed, love your voice tone and talking pace man!
Much appreciated! Welcome aboard!
I have put up the exact same wall for behind my 98inch Samsung. Using a normal hand held grinder with a general purpose blade works much better for clean cutting and precise shaping and minor adjustments. I used long rolls of white 3m double sided tape along all vertical and horizontal edges not in the middle. As the tape was white I was able to put to adjoining panels over the middle of one tape run meaning there was white tape behind and tiny gaps in the panel joins. No need for calking and the panel fit was tight and perfect
Dude, i love your talking pace, keep those videos coming!!! 💜
Much love from México 🇲🇽 🌮
I appreciate it!! 🇺🇸🤜🤛🇲🇽
This was exactly the video I was looking for
Awesome!
Nice video I am installing some now but the joints are showing is it worth using silicon to fill the joints as it’s flexible?
After your review I bought the Immersion kit (loving it), bought 2 times the Dreamcolor 5m RGBic light strip (5m) and now I think I'm gonna upgrade my TV setup with these 3D wall panels too :) Stop it man...stop it... :D
Your comment literally made my day. Absolutely hilarious. I literally broke a sweat making this one, with removing so many panels, shooting and reinstalling, so I’m really glad that you found it helpful! Thank you for your support!
@@MrTekSuggest No problem man...You make good quality videos.
One day I'd like to start too...
Greetings from Hungary! :)
-lol you spoke for all of us man. about 5min into this video my wife walked in the room, seen what I was watching and then said she just placed her order. its even more funny because she got on me for ordering the immersion 2.0 and both govee lamps. lol
@@htownswagga That is a funny story! You know, I’m noticing a lot of women like these panels too. My wife loves them as well.
@@MrTekSuggest Once I'll be done with it I'll post a video about my setup :) At the end of this year.
You are an extremely resourceful thinker! Glad I have found your channel
Thank you, welcome! :)
Literally just ordered the Govee Smart LED light bars, Govee Glide lights, and 16ft of the RGBIC light strips and then I saw this haha.
I have black foam squares right now but these are going to look way better.
Nice man! Have you seen the new combo model? ruclips.net/video/mY_YC-TtNq8/видео.html
Can you please tell me where you get your screen savers or the videos you use for your demo? Dang I have to get that tv. Nicest tv out there
Hey man, I don’t have a single source to recommend unfortunately, I find them from a lot of search work. Here is a good one to try with your set up! ruclips.net/video/Dji7czwpwGI/видео.html and thank you on the TV. I love the CX! I hear really good things about the C2 2021 model as well, though it does not get as bright
@@MrTekSuggest ya I’m getting one of those. I’m trying to figure the difference between it and the C1. Price is the same but the X looks better. I have an eye for video and an ear for sound. That’s why I love your channel. Hands down the most satisfying site I’ve seen on the RUclips. Do you use a sound bar for your audio? I guess I can look and see. There are a couple quality ones out there. Thanks again
@@MrTekSuggest thanks for the link now 8k is awesome. Maybe I should wait on the TV but I can’t wait lol it already looks good on yours.
@@daniel243ish Gotcha. The C1 is actually about 4/5 hundred dollars more than the CX. And I appreciate it! Also my sound bar is actually pretty dated and I need to upgrade my audio soon!
I wish this was out like 3 weeks ago. I been watching your videos and loves your back ground. I did this but with white stones
Hey! White stones eh? I’m sure those look pretty sick as well. Do you have a link for me to take a look at?
@@MrTekSuggest pin.it/3g64WZS
This is the pic that gave me the idea. I wish I could attach a pic so you could see it in my house 😢
I found you through the Govee bar update video but this one made me subscribe 🤗 Thanks for the very helpful content!
Glad you enjoyed. Welcome!
bro your walls look perfect for just adding led strips in those gaps and then add a diffuser strip on top, are the walls like that for any particular reason or just the style?
U made my day finally a perfect video about this panels
amazing video!
Another great video. I definitely need these panels 'cause my wall is flat white. They remind me of a short throw flashlight design or even the old F-117 stealth fighter how they deflect the light.
Appreciate it! And you’re right, I never really looked at it that way. Now I can’t unsee it LOL
I recommend to buy 4x8 1/2 foamboard or gatorboard an install the panels to that with velcro and simply hang or screw 4x8 p. to the wall . Easy to remove and adjust....
Awesome !!!!
I followed what you say and omfg they cool so amazing.
Do you think 3m adhesive would be good for sticking these the wall?
My other idea was to use Velcro command strips but cut them skinny so they can stick to the panels
😊😊😅😊😊😊😊
I love all your videos!! Thanks for all of them. 🥰
I appreciate it! 😁
I have a 77 inch wall mount and don't want to take the tv down to do this. Could i get away with having the panels be only like 4 inches behind the tv on the sides? Don't have back lighting yet.
will it take your paint of if you want to take the panels of ?
I think the tool you were referring to is a "circular saw".
Please, please!!!!! Do a review or whatever on the monster Illuminessence prism/digits!
Hi there, if I’m able to get one in hand, I’d be happy to.
Seriously I want to know where you got that reef aquarium footage at 1:21 ?! This is sick!
Planning on doing this to my 8x7 foot wall.. can you estimate how many 3m packs you did for that wall?
Hey man, I’d say 3 to 4 packs. But definitely order up to be in the safe side. Best of luck!
Saving this video, this is a good set up!
Glad you enjoyed!
Bro I've legit been planning this for awhile now, and gettin ready to send it. Perfect timing on the vid lol
NICE!
i've been waiting for this :)
Let's go!
Absolutely love your reviews! 👍🏾
I appreciate that!
I really like this project and considered doing it myself last year but after calculating my wall space found it was a little too pricey for me. How high and wide did you go with the panels? Did you take it to the ceiling and how far left and right of the TV? Thank you
Hey there, my project area is 8FTX 4.5FT. The panels are about 4 inches away from reaching the ceiling at the top. My TV is 65 inches, so there is about 20 inches on each side and 15 inches on top and bottom, from the edges of the TV to where the wall panels end
Hi I watched the whole video, but How much tape do you think you need for 32sqft?
That’s a good question! For 32 sq feet, 2/3 packs should do the trick if you cut them as shown! But it’s a safe bet to order an extra pack to be on the safe side.
@@MrTekSuggest thank you. I finished the project last night. Wish I could share pictures 😃
@@Luv2beLuuved Nice! Shoot me a photo on Instagram! @mrteksuggest
Love your videos man
Thank you!
😀 thx a lot for this video
What’s the led light you’re using in the back of the tv
ruclips.net/video/HgUM8DjP2uo/видео.html
Love this channel
ok... I NEED to know where you got that fish screen saver ... I need it for my daughter's room
I believe this is it.. I have a little one as well. Hope she enjoys: ruclips.net/video/9Ej-0VRWmI8/видео.html
Finally! Someone who didn't use caulk or glue.
Dope setting.
Appreciate it!
Incredible video. Thank you.
Glad it helped!
some are putting those panels in a frame with leds, i wonder how they make the frame, i want to do it too.
Fantastic tutorial! Subbed
Thanks!
Have you ever done a video with your suggestions of how to find "AWESOME" 3d screensavers. The backgrounds that you use while diy'n and showing us how to do something are really different and unique. Many are good enough to want to have a slow music type of soundtrack to go with them. Like cosmic relaxation videos. Do you have a place where you go to find them? Thanks for your vids by the way. Informative.
Hey there, that’s a great idea for a good video down the road! Unfortunately I cannot recite a specific location that list out the material. Lots of hunting, digging and poking around for the perfect saver! Thank you for watching!
I have this! 30x30 diamond look. It look good. Thank You!
Mat white.
Hey! Did you find larger 30 inch panels? The ones I use are 19.7”
@@MrTekSuggesthe means cm. You can get 30 x 30 or 50 x 50. You have the 50 ones in this video.
i like it but , i think that you need to remake the joints , try some white silicon , or some type of white paste for the unions , i can see where the panels unite and it's a little ugly :) but it's ok .
Thanks for watching! I've used silicone based caulk in the past, which I captioned. I experienced cracking and yellowing over time, which started to look pretty bad to say the least
Are these panels removable & reusable if moving homes?
PVC version is 100% removable and reusable
3:20 where did you get that unit that your ps3/5 is sitting on ?
Metal shears or tin snips would work if you don't have hedge trimmers.
Great tips!
I'd really like to do this but the house is not mine :/
I would try this in home, but I. Need to decide what tv wall mount buy I bought a 75 inch samsung tv q8dt like 95 pounds can someone tell me what full mount tv ?
Original amount shown in this TV I picked up at Best Buy (Insignia brand ) It can support 75s
Do you have the Govee setup to partial or full screen on the app?
I primarily use video part, mode probably 8 times out of 10. Check out this video here for more details on my setup: ruclips.net/video/nnyyvYFwip4/видео.html
@@MrTekSuggest Thanks. I did watch that video also. I use video mode to capture the screen colors but I noticed with its on partial it tends to go back to blue and purple on the bottom right side like a default. But when I go to full screen the color matches nicely. But partial changes color more to match.
@@G_Weezy some users see huge improvement after the update when they recalibrate the camera. Give it a shot!
@@MrTekSuggest I will try it again and see if it works. Thanks.
Looks great but...
If you use a circular saw it will destroy the panel 🤦🏼♂️ unless you turn the blade around or run it backwards through a table saw 🤷🏼♂️✌🏼
Did your rotate the panel as you put them on the wall? It doesn't look like they are all going on the same direction.
I actually rotated most panels. But there were a few that that slipped by me and are identical to the next.
@@MrTekSuggest yeah it looks way better than all the panels going the same way.
I wonder how the black ones would look in my arcade, on the ceiling, with an boarder of LEDs..?
Pretty dope I’d imagine. However the darker colors won’t reflect the LEDs as well
What's your experience with keeping them clean?
The PVC material is extremely easy to wipe down with a paper towel and a little bit of water and soap. And they have not yellowed in years!
What wall mount is that?
It’s an Insignia full rotation wall mount. I picked it up from Best Buy a few years ago. I have yet to see a listing for it on Amazon however.
@@MrTekSuggest thanks I just got a C1 for my series x, for my man cave. Really like how the wall looks might add that too
@@gannas138 Man that’s awesome! I’ve heard really good things about the C1! The panels will take it to an even higher level!
Now I want an entire room with those panels 😭
That would seriously be dope!
why do you have two goove cameras?
I am using the Immersion and flow pro bars together: ruclips.net/video/QiZ4rof-xg4/видео.html
Good info on these panels I've seen them never knew were to get them .the wall you covered wasn't cheap . Tin snips might be easier to handle cutting panels if you don't have hedge cutters . Great informational video. Thanks for sharing
Appreciate it! Really good tip on the tin snips. Bet that would also work really well for fine cuts. One of the biggest pros for the hedge shear, is how large of a cut you're able to get with one single motion. And you're definitely right about my slat wall. I remember being really hesitant to cover it up a while back, but I just wasn't getting the reflection I wanted with my LEDs. I also have this slat wall on other areas of my studio, so I still get to enjoy it:)
@@MrTekSuggest how many in today's age of modern technology would you say own a pair of those manual hedge trimmers ? You are showing your age as I am . Many younger people don't even know how to use a rotary phone if given the opportunity. Our times when we grew up are caveman to the much younger generation. Just a fun fact lol
Haha! Love this. 🍻 brother!
@@MrTekSuggest ☮
😃👍👍👍
Lol at the hedge clippers that's just dumb
Cool video! Is there any way i can get in touch with you and invite you to do a collab for my company's audio product? Thanks！
For inquiries, you can contact me via email on my contact page!
I'm a govee junkie
:)
bro your original wall looks better.
Love my slat walls, that’s why I had them installed! But they do not reflect light in the slightest! I still have my slat wall uncovered by panels in several areas of my studio, so I still get to enjoy it
Wanted to buy them too. But damn, for 2 walls I need like 200 pieces cause they are so freaking small and they are like 4€ each 🤨🥲
They often go on sale for cyber Mondays and Black Fridays