🌴🔧 customer drops off 2005 crf250r says bike won’t kick start he has to push start it
HTML-код
- Опубликовано: 6 окт 2024
- @getitingearcycles South Florida vibes #south #florida #southflorida #culture #vibes #satisfied #customer #honda #crf250r #world #worldwide #bike #bikes
Leak down test.
Check compression. Check valve clearances.
Adjust the intake and exhaust valves.
Sounds like the bike has low compression due to tight intake valves.
If valves clearances good. And leak down is greater then 10% can be that piston rings are worn out or the valve seats need to be lapped and or reamed.
Cross hatch the cylinder with hone beads.
“It only starts with a push start” vee: “let’s see how many kicks it takes”
Teach them how to find top dead center or the Tcd
You need to learn your customers how to start a 4stroke 🤦♂️
You mean teach?
They don't even know how to kick the bike
It needs a new kick start too its hitting the frame
What was the issue?
V touch all the way 🔥🔥
My bikes kick start is stuck. Who can help me out with that??
Valves are tight.
99% the cause
Or rings
Valves are worn..
@Cry Babies millennials if a valve is adjusted incorrectly... aka if you adjust it too tight it'll have starting issues.... in this case the valve was worn... clearly you have no idea what you're talking about
@Cry Babies millennials they'll only get tight if you tighten them
What was wrong with it in the end
My bike does the same thing
Certified lemon🍋🍋🍋
Clean the carb
I need some veetouch