Making a pure and correct Stratocaster wiring
HTML-код
- Опубликовано: 14 апр 2022
- If you have any questions or messages, please feel free to comment.
I modified the threaded holes in the body for Stratocaster wiring fabrication and pickguard installation.
Properly centered and pickguard mounted.
I worked on the wiring with less solder in my ideal guitar industry and with a heat level that did not degrade the solder.
Beautiful wiring is difficult.
Thank you for your request.
Parts and tools used
TONE Power Grip Driver Set PLPGD6
amzn.to/2Q5MrRr
Wera Craftform Diamond Screwdriver Set
amzn.to/3s2RoLu
VESSEL Precision Hex Screwdriver
Set, amzn.to/2O6hFoC
1.27(inch)amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal Polishing also Picard
amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite.com/andybassan...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ adachi_andy_koki
#restoration
#asmr
#andy_bass_and_guitar 
Видеоклипы
The wiring restores my faith in humanity.
絶対に完璧なはんだ付けスキル。尊敬する。
What an honour it would be to have my guitars upgraded by your work!
Thank you!
🤣🤣🤦♂️
I have a '56 Custom Shop relic. I have swapped in and out various pickups. Right now, I have it back to the original CS pickups. Having seen the video, now I want to rewire it to make it neat and clean like this what Andy has done in this video. Inspiring to say the least!
I got all excited thinking you were about to put some time into a mid-50s Fender, then I saw MJT in the neck pocket!!! Those guys make some beautifully convincing relics. Great work as always, Andy - loved those "jewels" of solder beads you so deftly created. I'd bring every one of my guitars to you without hesitation! 🙏
Thank you!
MJT is a well-known manufacturer.
I did not know that.
Very good video! Your soldering is the best I have seen while searching for guitar wiring. You bundle the wires so they aren't flopping around and you make your actual soldering very neat.
Just stumbled upon your channel. I enjoying watching quality workmanship! It's nice to see someone have pride in their work in this day and age!
This is so therapeutic to watch. Great stuff & workmanship!
ありがとうございます。
I just want to thank you for this amazing video. I am going to be rewiring a Strat soon and will use this video as a tutorial. Again, many many thanks for this and all your videos.
Best guitar soldering job I've seen from guitar youtubers.
One of the absolute best Yotube channels, love your work!
I love how precise and meticulous your work process is. You are a true craftsman.
Thank you!
Meticulous is a perfect use of a word. Perfection is what I would add.
This has been incredibly relaxing. Thanks!
Once again Andy, great work and a pleasure to watch!
Thank you!
Top work. You obviously know your craft!
Love your work Andy! Also love the lighting, angles, and camera work!
ありがとうございます。
0:01
もうこの時点でラッカーボディの良い音してる…
PGビス１本からホント丁寧ですね
レリックボディは塗装を薄く出来るので、響きを抑制されていない感じしますよね。
よく鳴る好きなギターでした。ただ、ビンテージとはちょっと違う鳴りかな。とも思いました。
Your soldering skills are incredible... And camera too.
Wow, such a meticulous work!
Thank you!
Amazing work as always, Andy!! Learned a bunch of new things watching you work. Thanks for sharing your knowledge and experiences with us!!
丁寧で綺麗な配線ですね！良い仕事です！
ありがとうございます！
凄く丁寧な仕事されていますね！ちゃんと道具も揃っている👍
ありがとうございます。
Excellent work and attention to detail verging on overkill. A good thing you don't work on production but however your soldering and wire positioning is top notch. I personally would have done a common ground.
いつ拝見しても素晴らしい！
ありがとうございます！
that's one lovely guitar. Love the way the finish checked naturally. Also that's some stunning work to wire up a strat. huge lessons learnt
ああ〜、、、、、🥲🥲🥲もうこれ大好き過ぎて無限に見れますはんだしてるときの音めっっっっちゃ落ち着きますね、、、🥲
ありがとうございます。
fine art
I have a MJT telecaster custom in gold and a MJT ash strart in natural, two the best guitars ive ever heard or played
素晴らしい手さばきかっこいいです🤩
カメラワークナイスです🤗👍🙆🙆♂🙆♀
自分でも素人配線してますが、これはなんとも美しい うん美しいとしか言い様がない
Hi there! You're a super neat Luthier.
Job Well Done !
ありがとうございます。
Very similar to my workstyle. I have also very similar tools.
5/5 from a profesisonal for your craftsmanship . Solid solder joints, nice wire work.
The final product looks absolutly great. Very nice to see that.
Me encantan tus videos
Thank you!
いつもながら丁寧で美しい仕事ですね^^
ありがとうございます。
清く正しいシリーズにして続けて欲しいです……
む、むずかしい事をおっしゃる・・・笑
正義と正しさは人によって違うので、すごく怖いですが、やってみましょうか・・・
@@Andybassguitar
お願いしたいです……！
ですが、テレキャスターあたりは色々横槍を入れる人が多そうで怖いですね……笑
How wonderful is this?
I'm a practical guy and likes to do stuff that needs doing.
Electrics though are beyond my comprehension other than basic maintenance.
I watch this and applaud the skill and knowledge, yet at the same time have no clue as to whatsoever is happening.
I hope to upload an explanatory video at some point.
@@Andybassguitar thanks for the reply. That'll be something to look forward to.
竹串削ってるところで無意識にふっ！吹いちゃったw
So satisfying..
よかった。
Excelente trabajo amigo!!!!!
El Pickguard es metalizado en su parte interior?
En ese caso es necesario conectar las masas entre potenciómetros y llaves?
Felicitaciones.
ピックガードの穴が元々ズレてるってことあるのですねぇ
Gootの放熱クリップをポットのハンダ付けに使うの、自分も真似してみます！
違うメーカーのボディに違うピックガードとかだと、ほぼ修正が必要ですね。
ヒートクリップはおすすめです。
Perfekt👍👍👍
Thank you!
ポット裏へのハンダ付け苦戦しがちなので、とても参考になります！
メッキされていないポット裏のハンダはやり方を覚えると戦えます！
Great
Thank you!
I missed you andy!
Thank you!
Sorry for the slow frequency of video uploads!
Fantastico ❤
ありがとうございます。
はんだ付けはものすごい綺麗！！！
tokai ですか
ありがとうございます。
音のないシーンも音が聞こえる不思議。（脳内再生）
目の保養だぁ、自分もこんな風に出来たらなぁ笑
Nice work! What is that tool you used to clamp those wires on the potentiometer and capacitor?
So satisfying i wonder what capacitor did he use for that strat
いつか自分のギターもお願いしてみたいなぁ。
うれしい。
A Mark Jennings (mjtele) body. Those are some of the best reliced ones.
@@witchell8976 You get what you pay for 😉
It was a very ringing body.
I see you use a heat sink for the pot lugs but not on the capacitor.
Also you do use metal clamps for the spring claw which act as a heat sink, is there a reason you do it this way?
lovely neat job 👌
Неплохая работа. Но я бы свил провода от звукоснимателей и вместо изоляционной ленты закрепил бы провода пластиковыми хомутами. И паяльник нужен помощнее ,мощный паяльник делает это быстрее и не даёт перегреваться резисторам .
What did you use on the fretboard? It looks different than what you've given in the link. Thank you!
Pure art!, your works are amazing dude...
P.D.: What soldering iron are you using?
The soldering iron is HAKKO FX600A.
amzn.to/3MKgicj
Thanks!
3rd fret probs need more work otherwise really good . Try using more protection . Just a tip Andy
Anyone else feel like a hack after watching Andy work?
That's A+ work. Thanks for idea of iron clamps which holds wire together. How much money you get for this job(if it not a secret ofc)? What's in that jar, for fingerboard? Looks tasty
Thank you!
Prices are secret.
The fretboard is coated with beeswax wax.
This guy turns a 10 minute job into a 2 hour job, fitting a pickguard 😂😂😂
Hello there can i ask about the pot u used on volume and tone
What is on volume (A or B) and also on the tone (A or B)?
At the end what u put on the fret board? Is it wax? And what kind of wax that is?
Please answer
Thank you🙏
Great. I do think the Freeway switch offers worthwhile variations (especially bridge & neck) while keeping standard positions intact, but that would be the only upgrade. (I added phase reverse push-pulls along with the Freeway switch, but my Strat is for recording purposes, mostly.)
celle qui sonne le mieux des 3 que vous avez fait il y avait du bois et des planche a cette époque chez CBS
Incredible work.
Liked the use of hand tools .
May i ask where you got the locking pliers in 10:44 ?
That's what I'd like to know
@JimmyKay1976
Already sourced it ,
Goot heat clip H2SL or H1
@@ranius7388 Same here. Just ordered. Can't wait
Wow what a beauty job. Just one question, connect the barrel of the tone and the volume with a wire it's not reduntant? You already have the connection from the shielding of the pickguard. Just a question not a judgement.
Shield tape on the pickguard is not enough.
If the pot comes loose, the ground will be disconnected.
This is true for many Fender guitars, but it is sad that there is no ground wire.
@@Andybassguitar thank you for the answer.
まるで名医のオペを見ているようだ
Tidy work m8
Thank you!
@@Andybassguitar I'm just learning how to solder pots at the minute and I have been watching your videos for some time now, and I can honestly say you make it look easy haha keep the videos coming Andy
hola que prolijidad,, que valor recomendas para el capacitador del tono? mucho gracias
I think anything is fine.
Preference.
What brand are those small handy clamps you use when soldering?
Thank you!
@@Andybassguitar ??
Sorry, I made a mistake.
The clip is a goot heat clip.
amzn.to/3Mbn627
Can you add a link to the wiring diagram? I think I know what it is but I am not 100% sure.
Bro! Amazing picture! What camera you used?
Thank you!
The camera is an Olympus OM-D EM5M2.
@@Andybassguitar beautiful picture. what lens is it?
@@dom.mp3 M.ZUIKO
Wonderful work ...what material you use for fingerboard ? Thanks
Thank you!
I think it is a rose fretboard.
@@Andybassguitar i talk cream that you use for the fingerboard thanks
@@marcomagnoni7341 It is the original beeswax wax.
@@Andybassguitar thanks
Am I the only one blowing on solder while watching the video? -)
При пайке удерживать пинцетом удобнее за оплетку, а не луженый провод. Паяльником пинцет не нужно нагревать
Извините, я не понял ваш комментарий.
ハンダは何をお使いでしょうか？
ちなみに、鉛フリーでしょうか？ビンテージ であれば、時代に合わせて有鉛でしょうか？
普通に売っているケスター44です。無鉛ですね。
有鉛があれば有鉛を使いますが、継続的に手に入らないものはあまり使いたくありませんね。
お客様からのご指定があれば別ですが。
ノミの切れ味すげー
Good afternoon! Are these good potentiometers? Where to buy (give a link). Thank you. Health!!!
jp.rs-online.com/web/p/potentiometers/4897555
I recommend a potentiometer from Tokyo Cosmos.
I think it is the best quality in the world.
I have my preferences, though.
Чем вы полируете и чистите палисандровую накладку?
Иногда используется апельсиновое масло, но для увлажнения применяется пчелиный воск.
is that a paste wax you're using on the finger board?
オリジナルの蜜蝋ワックスです。
It looks like a surgery. Nice job.
ありがとうございます。
Why not put together every ground?
And now the guitar is sounding better?
How hot was the soldering iron?
350℃くらいです。
Потенциометр громкости нужно было дальше убрать от струн.
Isn't that strat extra thin?
强迫症表示极度舒适 差点睡着了 堪比ASMR
Thank you!
スプリングの5本張りはオーナーさんの趣味ですか？
だと思います。
パーツはお持ち込みなので！
Did anyone else blow on that first solder joint at 8:24? :0 ss
是你起了中文标题还是RUclips自动给我翻译的啊
我已经在一个翻译网站上翻译了它。
如果翻译中存在任何奇怪的地方，我们很想知道
Also why are you running a shield plate but still wiring the pots together that eliminates the need for that.
あのアルミのテープを信じてはいけません。
アースを配線しなくても問題はないかもしれませんが、導電性も悪いですし、音や保険の意味でもアースを配線する事は非常に重要です。
I don't even know what that says and there is no way to translate it.
9:19 what is tool?
Heat clips.
As a Luther my only criticism would be to heat your pots more before soldering the connections don't seem very conductive . Just a tip
if you saw my soldering joints you would have a seizure
ポットの1とケースをダイレクトにせずわざわざワイヤリングするとは。なんか利点あるのかな？
ポットの端子を曲げてケース？カバーにはんだ付けすると、ほんの少しですが端子とカバーが密着せずにハンダで埋めたような状態になるのです。
配線で繋ぐことによって、接点は増えますが、端子とカバーに配線を密着させて繋ぐことができます。
ハンダは抵抗なので、イメージとしてハンダで電気を通してはいけないのです。接着剤みたいなイメージというか、極限までハンダは少なくて、だけど配線が外れないように。という考えで配線しています。あと熱によるハンダの劣化を少なくするとかですね。
He counter sinks the screw holes.. even though there's a pickguard goin on top.. this is just nonsense for the camera. People on here think he's some kind of master now 😂😂
例えば0.5㍉ネジ穴がずれていたら僕はネジ穴を開け直します。
また、インチネジのネジ穴にミリネジを入れたりすることは絶対にしません。
時間をかけた分だけ恩恵が有るのです。それがあなたに取って有意義であるかの問題ですね。コメントありがとうございます。
Всмысле правильной? Может это переведено криво и имелось в виду оригинальной, тк распайки "правильной" для всех не существует
Good job but I just watched the most pointless stuff at the beginning with that pickguard lol. You plugged the holes then pretty much drilled them right back in the same spots lol. Installing a pickguard isn't rocket science but you just made it that. Put your neck on then bridge and line up your pickguard and drill lol.
No kidding.
I didn’t get why he used that chamfer tool on the body, like the head of the screw would sit there, but then put the pick guard on… what does the chamfer do? Am I missing something I should know?
The bevel is to stop the finish cracking and lifting when you put a screw into a freshly drilled hole. I guessing he plugged the holes because they had been enlarged over the years and that’s why the fresh ones where drilled more or less in the same spot.
@jimir68 I think he just did it cause it wasn't lined up correctly enough for him really cause that's why he is working a mathematical problem marking everything and putting it back on there lol. It could have been but I think that's not an old body so I don't see the screw hoke being blown out unless someone changed pickguards a bunch on it maybe. The finish will still check off that screw hole no matter what but I believe it's a relic anyway so I don't see the point in that really but I see what your saying
Loads of totally unnecessary poncing about for the scratch plate holes.
你是中国人吗？为何都是中文？
I am Japanese.
Because I want Chinese people to watch the video.
Wtf?