والله انتااا نجم كبير انا بحب اتفرج علي اخترعاتك وبتمتع بيها وبجد معظم الاخترعات بتعتيك ده انا عيش بيها تسلام يا نجم وانتااا تستهل الف ليك 👍👍👍👍👍👍👍👍👍👍🤍❤️❤️❤️
First off things like the hole punch would be much faster to just build one then to go to the store. I build tools every day to avoid the time it would take to go to the store. second off some of these tools are not available in any store.
@@ottotater2787 Most if not all of those tools are available at Lowes. Maybe not the hole saw guide, I've never seen one before. But then again, I've never had an issue holding my drill straight using a forstner bit.
If you don't have basic hand tools and can't buy them, but you do have an angle grinder, a power drill, a welder and a pile of rusty steel, you can make your own tools. Makes perfect sense to me! The title is a bit misleading, though. Just one two-letter word, "My", added to the front of the title would have made it more accurate.
No, its a waste of time. Mild steel is so soft, the attempts at making a gear, in that excuse for a ratchet wont last 10seconds before being round off if you put any sort of pressure on it, let alone the square drive point for the socket
Why not clear the corrosion off before welding? ...welds full of inclusions and interfacial joints full off crud and corrosion. Quite silly to say the least. I suppose this is the difference between and engineer and a mechanic. An engineeer knows more than it is necessary to know! All rather sad.
Apparently people don't understand the idea of making something just to make it, and the satisfaction/reward that comes with doing it. Of course he can buy all the tools, but that's not the point. The point is to have fun and simply make something.
You are a genius and I want you on my team when civilization collapses and Harbor Freight is a fond memory. This was one if the most entertaining videos, and I enjoyed the mystery. Thanks.
Yep report the video if you would like it is misleading and should not be on RUclips. RUclipsrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.
If you don't like a video, then do not "thumbs down" because this is just as good for the channel as a thumbs up. Instead, just move on t the next video.
@@coriscotupi apparently you don't know what the thumbs down stands for thumbs down stands for I do not like it so apparently I'm going to put I do not like it then why give you a better review than what you deserve don't like it I don't like it I like it I like it in this situation I don't like it is my opinions that's why they give the option of giving thumbs up or down. Go back lookup what thumbs up and thumbs down on RUclips means until then you don't know anything you're talking about. the thumbs-up thumbs-down rating system is there for my opinion and my opinion was a video suck so I gave it a thumbs down if you do not like it then create a better video that is not clickbait.
@@glydrfreak same here and they didnt show it hints why thumbs down for the click bait. As click baiting is against RUclips policy and as a result your account can be ban as they should be.
OMG Don't they sell tools in your country??? Everything you made could be purchased for far less than the materials and labor it took to make these crude versions. Not a single innovation or original idea even! 😡
@@JH-en1jo I totally understand that it is fun to make stuff! Although I personally would rather be making the stuff the tools were made to make than spend time and money to make the tools! 😵 Especially when all of the ones here can be had so inexpensively. Now if they were actually inventions or even a modification of an existing tool that makes things smarter and easier, then I am all for it. But seriously not a single one of these fall into that category. But hey, if you enjoyed making them, then great for you! In the future just don't claim they are smart diy inventions if they are just homemade versions of commonly available inexpensive tools. Obviously you are going to get some negative feedback when people are mislead. 🙄 All the best!
ah, that's where you're wrong . . . that device was made from rusty scrap in the last video . . . it has all the precision of a tool made from well-chewed bubblegum!
If you can center drill a hole before using that bit I will give you $30,000 today. I'm not kidding I will pay you that much because it'll easily be worth that much to me if you can resolve a problem like that today.
@@ottotater2787 He's not center drilling a hole before using that bit. He's using a different bit that has another drill sticking out of the center of the hole saw, which is the first one to bite into the material and then guides the saw part. Here's a picture: www.123rf.com/photo_52853635_wood-hole-saw.html The bit depicted in the video is for drill-presses, which don't need an additional guide. The bit I described is for hand tools.
Actually, I found some of these quite good...Sometimes u can't go out and buy these at your local shop. Great pastime for someone that likes to tinker. Good job.
After WW2 in the countries of Warsaw Pact many tools were handcrafted like in this video, and yes, from "rusted metal". You couldn't buy those tools in the store, but in the factory you worked, you were able to made them. So this knowledge may be useful in case of the "unpredicted future" ;)
Very talented craftsman. Amazing work done with cutoff disk. I just cannot fathom spending the time to make a ratchet wrench when you can run over to Harbor Fright and buy one for a few bucks.
I think this guy also stayed home from school on the day the teacher taught the definition of smart too. He is just recreating bulkier, heavier, and already rusted out versions of low tech tools.
@@rockrollmagratti7899 tenés razón en eso pero me refería a los juegos que los hacen adictos y los distraen muchos y después no saben cambiar una rueda de bicicleta
@@francoscarpecci217 si eso es muy cierto. No digo todos por que hay muchos jovenes que saben y mucho pero en su mayoria es como tu dices no saben ni cambiar un foco.
If you got lots of scrap materials and a welder you certainly could make a lot of your own tools. Paint them if you can so they don’t rust out right away
Yep report the video if you would like it is misleading and should not be on RUclips. RUclipsrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.
Yep report the video if you would like it is misleading and should not be on RUclips. RUclipsrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.
I agree with most of the comments, if you have a complete metal shop with a welder and the skills to use them then yeah you can make just about anything. It would be better if he showed you how to make these things from objects around the home or garage with the minimum of tools.
What’s up with all the negative comments? Sour grapes? Give the guy a break, he’s a skilled craftsman and is making some cool stuff. So what if you can buy the stuff at the hardware store? It’s more fun and educational making it yourself.
Yes of course, we all have a smithy and a hardware store "at home", of course. Como si todo el mubdo tuviera un taller de herrería y una ferretería en "casa" , claro que sí. 👍🤣🤣
I like the inventiveness and the make what you need that is missing these days where every one is just buy it I grew up on building sites and I remember the tools knocked up on the spot out of scraps that my father used for years you should make plans available
With all the skill you have...., you need to focus it on something more productive. Try inventing things that cant be bought at the dollar store. You have the talent.
Algunas cosas parecen obvias, y otras, al ver tus vídeos, uno descubre que las ha hecho mal toda la vida. Cosas simples. Muchas gracias por el tiempo que te tomas en mostrar esas cosas, pero también al editar los videos. 👍👍👍👍
Yep report the video if you would like it is misleading and should not be on RUclips. RUclipsrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.
This is all very clever. These are not inventions, however. This is recreating crude versions of pre-existing stuff. And, even though I already have the welder and grinder (Which, come on... that is NOT part of the average tool set. Every guy has a hammer; not every guy owns a welder or grinder), by the time I go buy the metal stock needed to make these things, and spend the time and energy; plus, let's not forget that welders are not free to run, and grinder wheels cost money... these tools can be bought for less money. The only way that this makes sense, is if the dictator of the socialist utopia, in which you reside, has issued you welders, grinders, and an unlimited supply of metal stock... but won't provide you access to basic hand tools.
If you have the scrap metal and tools laying about and it is a day's trip to get to the store it can be cheaper to make it. Also it is a great project for when you are board.
Simplement excellente tes idées et en plus tu es un bon soudeur parole de professionnel de la soudure tu metrise bien l'électrode... Bravo pour ton génie mon ami..😀👍
This is brilliant! It's alchemy! Rusty iron turned into more rusty iron.
It's like a merry go round where you get off right where you got on,
💝💝💝👍
والله انتااا نجم كبير انا بحب اتفرج علي اخترعاتك وبتمتع بيها وبجد معظم الاخترعات بتعتيك ده انا عيش بيها تسلام يا نجم وانتااا تستهل الف ليك 👍👍👍👍👍👍👍👍👍👍🤍❤️❤️❤️
Should do a video that matches the introduction picture that I clicked on.
Diy bijibapakaumeledak apa gunanya
The magnificence ... I need a video showing how to industry turnover points on iron ..... with thanks and appreciation for your person
“6 more expensive ways to get things instead of going to the store”
But on the other hand he experiments a lot of satisfaction making his own and personalised tools. Think about... 🤔🤔🤔🤔
First off things like the hole punch would be much faster to just build one then to go to the store. I build tools every day to avoid the time it would take to go to the store.
second off some of these tools are not available in any store.
@@ottotater2787 Most if not all of those tools are available at Lowes. Maybe not the hole saw guide, I've never seen one before. But then again, I've never had an issue holding my drill straight using a forstner bit.
Agree 1000%. It'll be easier, quicker, cheaper and better quality in a shop. And no time wasted.
Exactly!! Check out my long post to see if you agree...........
If you don't have basic hand tools and can't buy them, but you do have an angle grinder, a power drill, a welder and a pile of rusty steel, you can make your own tools. Makes perfect sense to me! The title is a bit misleading, though. Just one two-letter word, "My", added to the front of the title would have made it more accurate.
If you have the tools to make all of these, then it's a pretty good chance you already have the tools you're making
Of course he has all the tools, he made them!!
I want the tools,
Indeed.
I want the tools !!!
@Paul Silcock A guy named Bob made the first tool. All others came from that.
I like this guy, he is the first of these "homemade" invention guys who actually invent something useful and intelligent
Even if these are invented, but i like the style and approach of things very much
2:22-2:50 храповик из сыромятины. Душевно, видимо автору не попадались закисшие болты, При срывании которых ломались закалённые храповики.
Я сильно охуел от способа которым он этот храповик сделал (само зубчатое колесо)
А ты закисшие болты ну прям трещоткой срываеш? Ну-ну
@@alexandrpustovoy8176 Ну, да. А что таки не так? Или вы предлагаете набор экстракторов?
Ну так и сочленение с головкой 1/4 дюйма! Максимальная головка 13 мм , а резьба м8. Сдюжит!
Angle grinding that ratchet gear, pure artwork.
Here's a hot tip before you weld anything grind off the rust or any coating like zincalum or galvanizing.
Very useful tip.
Not really needed
Craig Jones ruclips.net/video/B_lL1WXYBAo/видео.html
@@Quentyn73 absolutely is needed you amateur
Why
Excellent 👍👍
Grinding your own gears with an angle grinder is some next-level DIY!
No, its a waste of time. Mild steel is so soft, the attempts at making a gear, in that excuse for a ratchet wont last 10seconds before being round off if you put any sort of pressure on it, let alone the square drive point for the socket
Word! What is this channel anyway? 5-Minute Crafts: The Useful Edition?
@@kf8575 Killjoy...
I wanna be you when I grow up! Don't listen to the haters. I got a grinder and a 100 welder and no tools... gonna make me some cool stuff now!!!
Metal welding without metall cleaning? Amazing awful... Сварка по ржавому металлу жесть ващпе. Звезда в шоке...
Still gets the creator to like
Why so many negative comments on this video? Praise creativity! Nice work! Thumbs up from me!
Welds rusty metal together, grinds weld flush...
"Weld" lol you mean his 352 tacks
Why not clear the corrosion off before welding? ...welds full of inclusions and interfacial joints full off crud and corrosion. Quite silly to say the least. I suppose this is the difference between and engineer and a mechanic. An engineeer knows more than it is necessary to know! All rather sad.
enfin du bricolage de PROFESSIONNEL , Bravo !
Homie desperately needs a harbor freight in his neighborhood.
Homie is a HF!
Apparently people don't understand the idea of making something just to make it, and the satisfaction/reward that comes with doing it. Of course he can buy all the tools, but that's not the point. The point is to have fun and simply make something.
I use 'piloted' hole saws with a built-in drill bit.
Doesn't do any good if the circle youre removing is the part you want though
just put a hole in a piece of plywood, and clamp that where you want to drill hole
You are a genius and I want you on my team when civilization collapses and Harbor Freight is a fond memory.
This was one if the most entertaining videos, and I enjoyed the mystery. Thanks.
Harbor Freight is a joke!!! Save your penny’s and buy quality tools that aren’t embarrassing.
"Need a wrench? Great. Grab your wrenches, we're going to build a wrench!"
0ї
Ok wait, let me grab my wrench.
Wait a minute.....
THIS MAN IS GENIUS
He never showed the tool from the picture for this video. Thumbs down.
Yep report the video if you would like it is misleading and should not be on RUclips. RUclipsrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.
I clicked on this video to find out what the heck a bolt threaded through the side of a nut with a spring on it was good for.
If you don't like a video, then do not "thumbs down" because this is just as good for the channel as a thumbs up. Instead, just move on t the next video.
@@coriscotupi apparently you don't know what the thumbs down stands for thumbs down stands for I do not like it so apparently I'm going to put I do not like it then why give you a better review than what you deserve don't like it I don't like it I like it I like it in this situation I don't like it is my opinions that's why they give the option of giving thumbs up or down. Go back lookup what thumbs up and thumbs down on RUclips means until then you don't know anything you're talking about. the thumbs-up thumbs-down rating system is there for my opinion and my opinion was a video suck so I gave it a thumbs down if you do not like it then create a better video that is not clickbait.
@@glydrfreak same here and they didnt show it hints why thumbs down for the click bait. As click baiting is against RUclips policy and as a result your account can be ban as they should be.
you would have a lot better weld if you would grind the rust off the area to be welded...
ruclips.net/video/g6SH8Myp3vM/видео.html
Old adage: "Just because you can, doesn't mean you should."
A very genius ideas. Small youtubers here.
OMG Don't they sell tools in your country??? Everything you made could be purchased for far less than the materials and labor it took to make these crude versions. Not a single innovation or original idea even! 😡
It's fun to make your own stuff!
@@JH-en1jo I totally understand that it is fun to make stuff! Although I personally would rather be making the stuff the tools were made to make than spend time and money to make the tools! 😵
Especially when all of the ones here can be had so inexpensively. Now if they were actually inventions or even a modification of an existing tool that makes things smarter and easier, then I am all for it. But seriously not a single one of these fall into that category.
But hey, if you enjoyed making them, then great for you! In the future just don't claim they are smart diy inventions if they are just homemade versions of commonly available inexpensive tools. Obviously you are going to get some negative feedback when people are mislead. 🙄
All the best!
I think you're fabrication demonstration is pretty darn wicked bro! All the bad assed knowledge, mechanics of physics... Wicked cool bro!
Mr Suny : Using great skills and pro tools for create anwsome tools that you can buy for five dollars
Sir please disregard d negative comments, I have learned a lot from u, thanks, from Trinidad
Yeah I use my precision measuring tools as a scribe
ah, that's where you're wrong . . . that device was made from rusty scrap in the last video . . . it has all the precision of a tool made from well-chewed bubblegum!
@@willi-fg2dh lmao
Amazing creative tool
8:26 they can come with central drill to center you're hole you have to make greetz
Whaaaaattt??
yes
If you can center drill a hole before using that bit I will give you $30,000 today. I'm not kidding I will pay you that much because it'll easily be worth that much to me if you can resolve a problem like that today.
@@ottotater2787 just give me 150$ i will make it for you, you even didn't have 10k on your wallet, right?
@@ottotater2787 He's not center drilling a hole before using that bit. He's using a different bit that has another drill sticking out of the center of the hole saw, which is the first one to bite into the material and then guides the saw part. Here's a picture: www.123rf.com/photo_52853635_wood-hole-saw.html
The bit depicted in the video is for drill-presses, which don't need an additional guide. The bit I described is for hand tools.
Good job❤❤❤
So smart, that realy helpful
Actually, I found some of these quite good...Sometimes u can't go out and buy these at your local shop. Great pastime for someone that likes to tinker. Good job.
the device shown as the introduction of your video was not included within your video.
exactly my thoughts too
click bait to get you to watch things being invented that have already been invented...
next in the series.... how to invent a wheel
1. a clamp
2. a socket wrench
3.a flare wrench
4. hole punch
5. a jig
6. jig
Why does he keep lookin at me like that
After WW2 in the countries of Warsaw Pact many tools were handcrafted like in this video, and yes, from "rusted metal". You couldn't buy those tools in the store, but in the factory you worked, you were able to made them. So this knowledge may be useful in case of the "unpredicted future" ;)
1:55 made me wince >.< Poor verniers!
Nice inventions
Молодец.голова и руки работают!
Не в ту сторону они работают, во всем виноваты тяжёлые наркотики.
Довольно большая редкость среди подобного контента действительно толковий и креативние идеи
Pleaseeee grind all the rust next time. It was just eating me up 😩
Lol its funny that he grinded after he wielded
Cool !!!
why do i keep watching these videos.... 😞
people, buy tools !!!
paul van schie I was just thinking the same thing. These aren't inventions.
Not all people are equal
Because before you could buy you had to make things
"aw yeah lets consume and produce waste instead of reusing resources we already have..."
I'm a Trump 2020 M.A.G.A Man And America is Great Again
YOUR VIDEOS IS VERY HELPFUL
Who tf has this kind of time??? Making ur own sprocket like u can get it for a dollar or 2🤦🏻♂️
ruclips.net/video/4Jg5I2DhCH4/видео.html
How do you like the idea?
Subscribe will be a lot of interesting
@@Mr.Craftsman Need suscribers, right? Spam!
@@marcelojaviertwt fuck you
@@SquishedRoadkill You just build one in like.... humm... 5 minutes!? You just need to have all the parts and tools...
Facepalm emoji, come off it
Very talented craftsman. Amazing work done with cutoff disk. I just cannot fathom spending the time to make a ratchet wrench when you can run over to Harbor Fright and buy one for a few bucks.
Teacher: Class today we're going to learn about the word invention
This guy: nah fam I'm staying home.
Ryder RatedR ruclips.net/video/B_lL1WXYBAo/видео.html
Please teach us English , Sir!
I think this guy also stayed home from school on the day the teacher taught the definition of smart too.
He is just recreating bulkier, heavier, and already rusted out versions of low tech tools.
.
...
But they are all inventions, that you can do yourself, but I wouldn't say are new, or smart.
Video and music both are superb 👍❤️👍
Felicitaciones,sos brillante!!! Ojalá la juventud de pondría hacer lo mismo acá en Argentina y dejen mas los celulares
Y si dejan los celulares ....¿como van a ver este video? 🙃
@@rockrollmagratti7899 tenés razón en eso pero me refería a los juegos que los hacen adictos y los distraen muchos y después no saben cambiar una rueda de bicicleta
@@francoscarpecci217 si eso es muy cierto. No digo todos por que hay muchos jovenes que saben y mucho pero en su mayoria es como tu dices no saben ni cambiar un foco.
Deja las motitos salame
If you got lots of scrap materials and a welder you certainly could make a lot of your own tools. Paint them if you can so they don’t rust out right away
1) Useless
2) Clickbait
Yep report the video if you would like it is misleading and should not be on RUclips. RUclipsrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.
@@fubar1872008 OK
Timothy Farmer you should have to repay me for the brain cells I lost reading your stupid reply.
Cleaning the dirt and rust from the steel you are about to weld is a number one must do thing if you want your welds too hold!
Come on, ratchets are readily available. Hell most if not everything is. And unless you already have the materials easier to get.
Herman F. Ebeling, Jr. wtf
Useless jiberish from a useless jiber
If you broke remote live in a non westernized part of the globe an don't city slickers or cities an their virus carrying ways
Appreciative,Innovative Idea.Thank You
На последней струпцине нужно выпилить в уголке паз напротив места сварки.
1.36 million views in the first 12 months... He is doing something right!
Always clear rust before attaching everything
Splendid ideas! Marvelous!!
Hey I was wondering if you could look at the camera like a creeper between every shot? Thanks for haunting my dreams
So good that editing makes the sparkling away, excellent !
Why does it not have the one from the thumbnail
Yep report the video if you would like it is misleading and should not be on RUclips. RUclipsrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.
I agree with most of the comments, if you have a complete metal shop with a welder and the skills to use them then yeah you can make just about anything. It would be better if he showed you how to make these things from objects around the home or garage with the minimum of tools.
I look this idea is very easy 😍😎😎
FYI, the crimping tool at 3:25 can be bought at any roofing/gutter supply place.
What’s up with all the negative comments? Sour grapes? Give the guy a break, he’s a skilled craftsman and is making some cool stuff. So what if you can buy the stuff at the hardware store? It’s more fun and educational making it yourself.
Yes of course, we all have a smithy and a hardware store "at home", of course.
Como si todo el mubdo tuviera un taller de herrería y una ferretería en "casa" , claro que sí. 👍🤣🤣
I like the inventiveness and the make what you need that is missing these days where every one is just buy it I grew up on building sites and I remember the tools knocked up on the spot out of scraps that my father used for years you should make plans available
With all the skill you have...., you need to focus it on something more productive.
Try inventing things that cant be bought at the dollar store.
You have the talent.
Algunas cosas parecen obvias, y otras, al ver tus vídeos, uno descubre que las ha hecho mal toda la vida.
Cosas simples.
Muchas gracias por el tiempo que te tomas en mostrar esas cosas, pero también al editar los videos. 👍👍👍👍
You are a genius!!
Very useful tools that will support woodworking jobs.
They make all these tools, and shocker.... it's probably cheaper than your stock steel. What a waste of time, on your end, and mine.
Yeah he spent 12 hours making tools he could have bought at Harbor freight for about $40
I thought the same thing. Let use a clamp to make a over thought clamp lol
Yep report the video if you would like it is misleading and should not be on RUclips. RUclipsrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.
Amazing ideas, clever thinking my friend
This is all very clever. These are not inventions, however. This is recreating crude versions of pre-existing stuff. And, even though I already have the welder and grinder (Which, come on... that is NOT part of the average tool set. Every guy has a hammer; not every guy owns a welder or grinder), by the time I go buy the metal stock needed to make these things, and spend the time and energy; plus, let's not forget that welders are not free to run, and grinder wheels cost money... these tools can be bought for less money.
The only way that this makes sense, is if the dictator of the socialist utopia, in which you reside, has issued you welders, grinders, and an unlimited supply of metal stock... but won't provide you access to basic hand tools.
Весьма удачные приспособления. Удобные, несложные и полезные! Интересно ещё и то, что здесь этот комментарий будет под номером 1000 )))
I hate these videos where someone spends a week making something that you can buy for $ 7.00 anywhere! Lol
Hand maid it's different!!
He earned more than 5000$ for this
You are awsome please don't ever change
Dude stop looking at the camera like that, pls
It's called "the fourth wall" in tv and movie studios.
@@alexbobman2172
What does that mean?
@@timhyland639 "4th wall", when an actor inappropriarely looks at the camera, probably because they are too self conscious of being filmed.
A lot of good ideas, and I also want to contribute something like that!A lot of good ideas, and I also want to contribute something like that!
Smart inventions, yes.
Smart to build your own half-arsed versions when you can buy them for a buck or two. No.
Title should have been, "Over-complicated every day tools that we've built"
Pl
Mis debidos respetos Estimado MAESTRO. Muy genial. Un verdadero arte.
Felicitaciones.
cool ideas, i'm a welder and love working with my hands.......cool stuff dude
Great work i have learn very things from your videos
So you spent all that money on materials when you could have saved money and bought a ratchet
Fr bro
Damn, I was just thinking that myself. That's not inventing...that's just a waste of time and money.
Sometimes you already have the materials and tools lying around, but no money for new tools, genius! So you gotta do it with what you have.
If you have the scrap metal and tools laying about and it is a day's trip to get to the store it can be cheaper to make it. Also it is a great project for when you are board.
Simplement excellente tes idées et en plus tu es un bon soudeur parole de professionnel de la soudure tu metrise bien l'électrode...
Bravo pour ton génie mon ami..😀👍
По моему Доктор Дью уже обследовал этого пациента .. Если нет - позовите срочно !) Вспомнил : последнее творение Доктору даже понравилось !
Awesome work man 👏
Muy buenas ideas like compañero 👍
No se pueden ver los videos
YOU ARE THE MASTER BRO!!
For built a ranch you spend 40$, electricity different materials electric drill...etc.buy a bloody ranch it's around 20$.
Its Hidden valley though...
Very good welding with a stick !!
Вот откуда Доктор Дью черпает вдохновения
Так точно
Bravo, bravo, bravo, super videos and products, you are a master, respectfull from old BG.
Серьезно сделали копеечный ключ-трещетку?!
С дубов попадали?!
Че Матвеева неё смотришь?