Where you left off on this video is where I am, but I'm trying to get it back together. I only took out the one pinion gear, which was the same one you took out. Mine had two teeth broken off. My problem is getting the two gears to line up. I don't know how it was when it worked, because mine, I didn't open until it wasn't working. I found the teeth in the housing with a magnet. I hope you show how you got it all back together. I'm not worried about getting it aligned, I just can't get the gears to jive. Anything you can throw at me, I'd appreciate it. Thanks Stephen
Would this work on a model 50 as well? I have one, the steering of which has become almost seized up, and I need to find a way to free it up. Any ideas along these lines?
Could someone please tell me what is the name of the part he is holding at 24:42 and where I can get one for the right side? Thanks and thanks for the video!
Golpes secos con un gran martillo por intermedio de una barra gruesa y corta de cobre o aluminio, con un ayudante que tienda a jalar con fuerza el volante
Yes, use the nut to keep puler center. I removed the same type of steering wheel. Hard job but I didn't have to cut anything. Destroyed what was left of the old wheel but didn't damage the thread or the taper.
Aca en uruguay tuerca al ras un hierro pĺano un martilll el doble de ese 3 golpes buenos corto y contundentes y sale 30 años de .ecanico saque varios y sin romper nada tengo un ferguson modelo 1957 motor leyland standard 4 cilindros en marcha una joya los 35 x del 1962 y los 135 del 1965/67 con perkins 3 cilindros estan todos marchando unas joyas de la mecanica made in ingland ... SALU!!! yo los reparo.saludos (no comprendo el idioma ingles) WILLIAN PRANDO DE URUGUAY
Todella hyvä video ,missä kerrankin näytetään,kuinka homma tehdään.👍👍
Thanks for making your videos. Relaxing watching you work because of your layed back style. Also sweet collection of tools and machines.
اشتركوا بالقناة لكي نقدم ماهو جديد وحصري في قناتنا للعرب كافه دعمكم يجعلنا نقدم ماهو اكثر
Thanks for sharing. Saved me making the same mistake!
9r99490
Heating that arm up right under the gas cup is real ballsy!
Missing You Stan, Rest Easy Brother. The Dizzy
Missing You Stan, Rest Easy Brother. The Dizz.
Whay did you not remove the nut all out and have bettet controlll
Where you left off on this video is where I am, but I'm trying to get it back together. I only took out the one pinion gear, which was the same one you took out. Mine had two teeth broken off. My problem is getting the two gears to line up. I don't know how it was when it worked, because mine, I didn't open until it wasn't working. I found the teeth in the housing with a magnet. I hope you show how you got it all back together. I'm not worried about getting it aligned, I just can't get the gears to jive. Anything you can throw at me, I'd appreciate it.
Thanks
Stephen
Would this work on a model 50 as well? I have one, the steering of which has become almost seized up, and I need to find a way to free it up. Any ideas along these lines?
Could someone please tell me what is the name of the part he is holding at 24:42 and where I can get one for the right side? Thanks and thanks for the video!
got a 40 cent get spark to the plugspoints are hot
Good sir thanks
Missing you my friend.
I have the same MF35 . But my it's 3 cylinder. Some one know how it's work draft?.I have video on my chanel.
What is the small leaver above the steering wheel baside the throttle???
firefighterc931 not a lever, it’s a light
It's a night light to see gauges this was a option some had it some didnt
Its a dash light, the side towards the driver is solid as to not shin in your face at night.
Golpes secos con un gran martillo por intermedio de una barra gruesa y corta de cobre o aluminio, con un ayudante que tienda a jalar con fuerza el volante
There are gaps in how we do this we salute the same front axle tractors ....
nice video
any video of massey 135's hydraulic
Not yet!
Vivek contact no send pls
Half inch piece of pvc pipe and a shop vac to clean it out..
Too painful to watch after first few minutes, you have to laugh!
Why did you destroy a vintage steering wheel completely unnecessary.
should of put the nut on three turns before you put on pullers.
Yes, use the nut to keep puler center. I removed the same type of steering wheel. Hard job but I didn't have to cut anything. Destroyed what was left of the old wheel but didn't damage the thread or the taper.
Aca en uruguay tuerca al ras un hierro pĺano un martilll el doble de ese 3 golpes buenos corto y contundentes y sale 30 años de .ecanico saque varios y sin romper nada tengo un ferguson modelo 1957 motor leyland standard 4 cilindros en marcha una joya los 35 x del 1962 y los 135 del 1965/67 con perkins 3 cilindros estan todos marchando unas joyas de la mecanica made in ingland ...
SALU!!! yo los reparo.saludos (no comprendo el idioma ingles) WILLIAN PRANDO DE URUGUAY
how to find a place to fill hydraulick oil mf35 1960 diesel
I used to have that Exact Brand Porta band.
+Sooty Mangabey it's a good one for sure
FixinThatUp
I like your videos and am a subscriber but that background music gets old. Thanks
Jim Buford Thanks Jim
l
A otra parte con galletero..el motor wn...
Haha, I am shocked you found something that ratchet wrench fits!!! Worst design/set ever LOL
Eso es lindo
Aero Kroil
not to bright put a nut on the bolt before you use puller
+tom white i just knew you would know more about it
Görüntülü çiftetelli
Imt 539
UU
Cc
Fuschere !
Missing You Stan, Rest Easy Brother. The Dizz.