hi @ashish question at time 00:34 how to turn off hazard when bonnet is opened.. answer for that is.... press the hazard switch inside from cabin , 2 times.. it will turn off the hazard indicator...even when the bonnet is opened....
Aashish bro Jo aap simple bolte ho woh asli mein bahut technical process hota hai😂😂😂😂....but still love your efforts and your passion..... would surely like to meet him person....as requested like kar diya video😊
Hi Ashish Huge fan of your works. I own a Z4 Automatic and am looking for a wiring harness. Is it possible for you to make one with relay for me the same as yours and courier on chargeable basis.
Awesome work Ashish.. I'd suggest you get a cordless impact wrench and a cordless drill.. Makes life really easy with the number of bolts and hex on modern cars.. And helps on roads trips and around household installations also
big fan of your content bhai 👌planning to get the z4 next month. Wanted to ask you for recommendation for replacement H7 bulbs that are a bit warmer in temperature than these.. 55w sub 5000kelvins..
Hi Ashish , very informative videos. How to remove park lamp bulbs holder and which LED one did you replace with? Any video on park lamp removal and replacement with LED
Very well done and explained Ashish. I have been following your videos for a long time, really impressed by your engineering and explanations. Couple of questions: 1. How did you source the parts(fog lamp) from Mahindra or Bodomo? 2. For parking light connection, did you cut the wire? 3. For H7 Aozoom, the power is 75W did you use a separate relay for that or used it on the same wiring ?
Sachh kehta hoon lLed lagaya tha 50w wali Osram ki. Khoob light hai par main miss kiya Night breaker Osram ko. Kal raat phir se change kardiya. Wapas ab osram night breaker halogen ko. Rainy season keliye halogen best.
I would still prefer below 5000K for long drive eye fatigue. And keep an eye on OEM wiring as you are using 75w load instead of 55w. If wires getting harder then it is generating more heat than it wire insulators could tolerate. In that case use relay.
1. True, colour temperature upto only 4300 k is fine, above it , it is not of much use. 2. Since the Wattage of the retro fit Bulbs is higher , shouldn't there be need for Relay, Heavy Duty wiring and Ceramic connectors ?
Actually you did a lot of wiring but you can get that fog lamp switch unlock from company and a wiring harness of rs 900 comes which is enough and you can operate them
Whats the fun in that..😋 I love doing DIY and i prefer making my own stuff. Plus when I inquired from my ASC they told me they'll either charge 20K or won't do at all. So I was not left with much options
1. Colour temperature upto only 4300 k (best is 3000k) is good, not above it , as it becomes useless in certain situations !!! 2. Since the Wattage of the retro fit Bulbs is higher , shouldn't there be need for Relay, Heavy Duty wiring and Ceramic connectors ? 3. Also since Led bulb , throws hot air through the Fan at the back, is there enough space between the Fan & the dust covers ? 4. Since Light is measured in Lumens, how many Lumens does your Bulb generate ? 5. Upto how many Watts Bulbs can the Original Fog Lamp system handle ?
dude i just came to know about an issue and recall with 4wd scorp-n, if you ever hear any sounds from your front wheel, immediately get it checked it can be fatal issue
When it comes to Scorpio I don't trust anyone except you!! Bowing down to your effort!!! Keep going!!
U r master of creativity and ur knowledge regarding every aspect of car is just mind blowing 💯👍
hi @ashish question at time 00:34 how to turn off hazard when bonnet is opened.. answer for that is.... press the hazard switch inside from cabin , 2 times.. it will turn off the hazard indicator...even when the bonnet is opened....
Yup got it now sir. Thanks for the support 😊
Aashish bro Jo aap simple bolte ho woh asli mein bahut technical process hota hai😂😂😂😂....but still love your efforts and your passion..... would surely like to meet him person....as requested like kar diya video😊
I was waiting for this kind of technical stuff, great to see this video.
Very nice video. Can you tell me where did you connect the connector for parking light??
Ashish ji Gazab karte ho har baar very nice video.i like ur efforts.
Genius at work yet again 😅🎉
Hi Ashish
Huge fan of your works. I own a Z4 Automatic and am looking for a wiring harness.
Is it possible for you to make one with relay for me the same as yours and courier on chargeable basis.
Awesome work Ashish.. I'd suggest you get a cordless impact wrench and a cordless drill.. Makes life really easy with the number of bolts and hex on modern cars.. And helps on roads trips and around household installations also
Brdr do you installed another led for parking bulb ?? Pls reply ❤❤❤
big fan of your content bhai 👌planning to get the z4 next month. Wanted to ask you for recommendation for replacement H7 bulbs that are a bit warmer in temperature than these.. 55w sub 5000kelvins..
Bhai circuit diagram kaha pe hai??🙏🙏
Hi Ashish , very informative videos.
How to remove park lamp bulbs holder and which LED one did you replace with? Any video on park lamp removal and replacement with LED
Very well done and explained Ashish. I have been following your videos for a long time, really impressed by your engineering and explanations.
Couple of questions:
1. How did you source the parts(fog lamp) from Mahindra or Bodomo?
2. For parking light connection, did you cut the wire?
3. For H7 Aozoom, the power is 75W did you use a separate relay for that or used it on the same wiring ?
ashish bhai great work. Please install hydraulic struts for bonnet.
sir what is the size bulbs use ,for both low beam and high beam
H7 both
Nice informative video
Hazard button ko 2bar continuously press karne se indicator band ho jayega.
Brilliant.......Informative video..
sir apne parking bulb bhi headlamp unit mein change ki h from halogen to led.. please kese kiya wo nhi ker pa rha hu mein meri gadi mein.
Ha mein bhi nhi kr pa rha
Sachh kehta hoon lLed lagaya tha 50w wali Osram ki. Khoob light hai par main miss kiya Night breaker Osram ko. Kal raat phir se change kardiya. Wapas ab osram night breaker halogen ko. Rainy season keliye halogen best.
how did you make parking light white? which bulb ?
Bhai Aozoom ke Headlight install Karne ke liye Relay ki Requirement hai kya ... Please Bataiye i also want install this light in my car
Could you share the model or any details of dummy parking sensors you used to cover the hole on the fog lights bezel..
I would still prefer below 5000K for long drive eye fatigue. And keep an eye on OEM wiring as you are using 75w load instead of 55w. If wires getting harder then it is generating more heat than it wire insulators could tolerate. In that case use relay.
1. True, colour temperature upto only 4300 k is fine, above it , it is not of much use.
2. Since the Wattage of the retro fit Bulbs is higher , shouldn't there be need for Relay, Heavy Duty wiring and Ceramic connectors ?
Informative. Nice job.
Bro already aapki car mei 6 pin ka ek blank connector dia hua h , steering column se latka hua , foot area se jhuk k dekhoge toh dikhta h vo
Excellent work 👌
Brilliant work... !!
Bro. U did door damping in ur previous car. Will u do it in your new car too?
Hazard switch on karke of kardena indicator of hojaega
Did not find wiring diagram on your insta
Projector headlights me led lg skti h kya
What kind of projectors?
Gazab👌👌👌👌
Very nice brother
Wonderful 👌
Actually you did a lot of wiring but you can get that fog lamp switch unlock from company and a wiring harness of rs 900 comes which is enough and you can operate them
Whats the fun in that..😋
I love doing DIY and i prefer making my own stuff. Plus when I inquired from my ASC they told me they'll either charge 20K or won't do at all. So I was not left with much options
Wonderful
Hazard light ke button ko do bar press karo band ho jayegi
Sequential indicator next
powerful headlight ko relay connection deni thi, electric warranty void ho jayegi !
1. Colour temperature upto only 4300 k (best is 3000k) is good, not above it , as it becomes useless in certain situations !!!
2. Since the Wattage of the retro fit Bulbs is higher , shouldn't there be need for Relay, Heavy Duty wiring and Ceramic connectors ?
3. Also since Led bulb , throws hot air through the Fan at the back, is there enough space between the Fan & the dust covers ?
4. Since Light is measured in Lumens, how many Lumens does your Bulb generate ?
5. Upto how many Watts Bulbs can the Original Fog Lamp system handle ?
Add same as old pop out light
Bunet switch k jack hata do
meri gaddi me wire cut wa rha tha and kudh ke gaddi ke wire katna pasand nhi h
❤
JAI JAI SHREE RAM 🧡🧡🧡🧡🧡🧡
Mahindra
cut your nails or apply nail paint🤣🤣🤣🤣🤣🤣
dude i just came to know about an issue and recall with 4wd scorp-n, if you ever hear any sounds from your front wheel, immediately get it checked it can be fatal issue
❤