I've said it before and I'll say it again; Peter you are ,by far, the best, most precise and accurate toolmaker I've seen in my half century of machining! And then to top it off, your running a graphic simulated tool path simultaneously with the actual machining operation so we could know what was going on, was beautifully done! Thanks for sharing your deep knowledge.
Enjoyed this a lot. Long time subscriber and I remember some great series you had on your channel which were taken down because of non-disclosure issues. Happy that you can finally show a similarly complex part again from start to finish. Actually I started a job as CAD/ CAM engineer at a company making mainly one-off and small runs of large parts which most often have gear teeth of some sort. They have indicated that all work is under NDA so everything stays within the company walls. I am learning Hypermill which is currently only used for milling but will find its way to turning. An Integrex or two would fit the shop very well and I think we will definitely be heading in that direction. My career move has most definitely been inspired by you (and others) so thanks a lot. I hope we will see videos from you for a long time.
Good day to you fine sir, My company has purchased me a Haas 35-LY lathe for my inventions, creations, abilities to think out of the normal box. In this, we will spend around $200,000.00. I will understand this machine sooner than later. I have ordered Mastercam, I have been using Mastercam design for a few years. I always have pressure on my shoulders, then solve the problems. In this new pressure, I also will not fail. I believe that I have seen everyone of your mastery videos. I think similar to yourself, you are very unique, thank you for your video's. I will create in my own way, but, I enjoy seeing how you think. You are very special to this World. Sir.
Hi Peter. Another impressive video. Really appreciate the editing, the overlays etc as others mentioned. No BS just really informative and interesting. Nice touch milling the conical on the clamps. Always look forward to the next video. Keep it up as long as it's worth it to you. Thanx. Be well.
At first when you milled with the tilted vise, I thought you were pushing it into deflection, but then I realized you were getting some four axis action. Good video, thanks for keeping it up!
The sound that the "second roughing drill" made upon entering the material is possibly the coolest machining sound I've ever heard. Maybe that was just the result of speeding up the video though, haha.
It's funny how I watch so many videos where I think to myself (admittedly in a delusional way): "yup, if I had that [shop, machine, time, equipment] I could do that". Somehow you have the biggest, fanciest equipment of any of the creators I watch, and those thoughts never cross my mind when watching your stuff. Thanks for the video.
Thanks for another great video peter! Useful to have this intersecting hole trick in mind. I would like to ask if you ever used any 'abrasive flow deburring' to deburr internal intersecting features like this?
Apologies if this has already been covered but 2 things really caught my attention. first, you didn't really verify the part was in the chuck straight. You indicated the outboard end but not the inboard end. You then dialed in the chuck when you (possibly) should have tapped the part into alignment before adjusting concentricity. Second, the gravitational error of sweeping the part for centerline could have been a couple thou, so unless you take measures to verify, you won't know. A good touch probe is far better than a dial indicator. In our shop all the horizontal mills have probes so we don't need to monkey around with indicators for position.
You must be new to my channel. I have covered the gravity error of indicating in the horizontal position many times. This indicator and arm I use in this machine I have tested and verified the error. But yes you are correct there can be an error with some setups. As to the runout error with the clamps holding the back parts face solidly back in the jaws (in this setup) it is holding the part perpendicular to the chuck. This wasn’t the first part I did and I did check that the lathe operation had turned the parts perpendicular on that end to the other (the one I’m doing). But again you are correct this error can exist where the part could run true in one place on its diameter and not in another. If it isn’t running perpendicular in the chuck. As to the probing.The way they built this machine it only has -10mm of X axis travel before hitting its limit. So here again you are correct a spindle probe would be best. But with only 10mm minus travel I can’t reach the bottom of the part with the probe. So using it can’t be done on this machine for this purpose. I hope that clarifies your questions. Thanks.
If you jog at a high rate into the part & brake the indicator or probe, it's guaranteed you won't have spares in stock, and it'll be late on a Friday afternoon.
Dialing around the center every now and then, probably couldn't hurt. But just out of curiosity, I was under the impression that the main spindle's center is always a consistent value away from X and Y Home. The only way it could basically change is if the definition of Home got reset. Like if the travel limit stops moved at all.
@@EdgePrecision That's a bit interesting. Neat. I work on 4th and 5th axis machines, and the center of rotation of the tombstone, is next to never checked. Only if something knocked into something, it would be.
@@ashleymonday_ On this machine the spindle probe works ok for things where the B axis is at 90 degrees (vertical). But because there is only minus 10mm X axis travel it’s not the best to find the X Y zero because you can’t probe all around the part on its face. So I always use a dial indicator in this case. In fact for setup on this machine I always use dial indicators. I like to see the actual deviations witch you don’t really see with a spindle probe.
On reason is this machine doesn’t have any more than -10mm X axis travel. So I can’t even get the Haimer probe on the bottom of the part. Also I prefer swinging the indicator around the part. With this short arm and indicator there is extremely small error not really enough to worry about. If I really wanted to streamline things I would purchase a Haimer centro gauge. I have seen this gauge and concider it precise enough as a coaxial indicator.
You ca buy on Amazon the connection for hypodermic needles. I just bought threaded one and mounted it in a blow gun. Then I could buy off Amazon needle blanks to mount in the air blow gun. It really is handy for this and blowing shavings out of tapped holes. You can buy all different sizes and diameter of these needle blanks. All with the same connection to put on the air gun.
@@EdgePrecision Hey Peter, love the idea and was trying to find the adapters on Amazon. "Luer Lock" is my best guess of the adapter and needle style from what I could find pictures of. Does that sound familiar? Thanks.
Hi Peter, One question, do you use dynamic offset when you're using the vise? Or different work offsets for each indexing? Just got our new Mazak VCN-700D with a Sankyo roller cam 4th axis. I'm planning of adding a tombstone and a vise very similar to your setup. I'm trying to think of something more fail proof than using centerline rotation or multiple WCS since I'm not the only one operating the machine.
This machine is older and doesn’t have the dynamic offset option. So for this setup I positioned the part in the cam software in relation to the C axis rotation. But if you have dynamic offset option it would make things easier.
Enjoyed alot to see the filler-pieces work that well. Peening the ends a bit was a elegant soltion.
Stefan in da house....🎉
I've said it before and I'll say it again; Peter you are ,by far, the best, most precise and accurate toolmaker I've seen in my half century of machining! And then to top it off, your running a graphic simulated tool path simultaneously with the actual machining operation so we could know what was going on, was beautifully done! Thanks for sharing your deep knowledge.
I really liked the simulation overlay during times where coolant obscures what's happening. Nice touch to the video!
❤
Your P.I.P. illustration really helps understanding what is happening and your air knife makes everything much clearer.
Enjoyed this a lot. Long time subscriber and I remember some great series you had on your channel which were taken down because of non-disclosure issues. Happy that you can finally show a similarly complex part again from start to finish. Actually I started a job as CAD/ CAM engineer at a company making mainly one-off and small runs of large parts which most often have gear teeth of some sort. They have indicated that all work is under NDA so everything stays within the company walls. I am learning Hypermill which is currently only used for milling but will find its way to turning. An Integrex or two would fit the shop very well and I think we will definitely be heading in that direction. My career move has most definitely been inspired by you (and others) so thanks a lot. I hope we will see videos from you for a long time.
Good day to you fine sir, My company has purchased me a Haas 35-LY lathe for my inventions, creations, abilities to think out of the normal box. In this, we will spend around $200,000.00. I will understand this machine sooner than later. I have ordered Mastercam, I have been using Mastercam design for a few years. I always have pressure on my shoulders, then solve the problems. In this new pressure, I also will not fail. I believe that I have seen everyone of your mastery videos. I think similar to yourself, you are very unique, thank you for your video's. I will create in my own way, but, I enjoy seeing how you think. You are very special to this World. Sir.
Hope you are doing well Peter. Have a fantastic day.
Very nice work! The things you do with that integrex are super impressive. Your videos should sell a lot of machines.
Really amazing work. The drill running in the X/Z planes is really a slight miracle
The accuracy of the intersections of the gun drilled holes is amazing! And a great tip on proper use of a "Set True" style chuck. Thank you.
Hi Peter. Another impressive video. Really appreciate the editing, the overlays etc as others mentioned. No BS just really informative and interesting. Nice touch milling the conical on the clamps. Always look forward to the next video. Keep it up as long as it's worth it to you. Thanx. Be well.
Those intersecting holes actually look pretty cool from the inside.
At first when you milled with the tilted vise, I thought you were pushing it into deflection, but then I realized you were getting some four axis action.
Good video, thanks for keeping it up!
The sound that the "second roughing drill" made upon entering the material is possibly the coolest machining sound I've ever heard. Maybe that was just the result of speeding up the video though, haha.
The time you must put into these videos with the simulation overlays has got to be immense. Very impressive.
Nice . Really like your machine
It is fascinating to watch you work on all sorts of parts. Thanks so much for taking the time to post.
That's the coolest vise mount ever! That set screw advise on adjusting chucks is something to consider. Pure gold. Cheers
Мне очень нравится как вы работаете и придумываете оправки и процесс обработки 👍👍👍👍
Спасибо! Я ценю это.
Absolutely fascinating Peter, your approach to difficult machining is second to non
It's funny how I watch so many videos where I think to myself (admittedly in a delusional way): "yup, if I had that [shop, machine, time, equipment] I could do that". Somehow you have the biggest, fanciest equipment of any of the creators I watch, and those thoughts never cross my mind when watching your stuff. Thanks for the video.
Great video as always:) It's awesome to see you uploading again:) Those rods worked perfect. Those intersections looked phenomenal.
A great way to wrap up a Friday. I always learn so much watching your videos.
very good job Peter,,thanks for your time
Довго чекав відео.Як завжди все на висоті,вивірка деталі вводить в транс).Чекаємо нових проєктів
I went from a ski patrol and mechanic to a doctor. Your intellect clearly exceeds mine. You are one smart guy.
Thank you! That's nice of you to say.
The tip on the set-tru chuck was very interesting. I will keep that in mind for the future.
Never a bad video from you dude. I aspire to wield even a fraction of your skill and knowledge.
Дякую за ваші відео, дуже інформативно і цікаво!
Very good solution plugging the holes. Great work Peter!
I enjoy all the topics that you cover, but really enjoy - and learn from - the machining videos. Thanks.
i could clock it up Peter, but beyond that way to much for my old bridgeport mind lol. top work thank you from the uk
This bloke is incredible!!!
Thanks for another great video Peter.
As always, everything is very professional
Love your work. As you said, the intersecting holes just had an EDGE, a sharp one at that. 😁 . Cheers.
I wish I stayed in the CNC business. It’s been 30 years. Nice videos
Amazing thought process to get that done!
impressive precision, huge amount of wisdom and knowledge (like always). Thank You so much.
❤
I like your jaw clamps and gun drilling and hole inspection
Good information thank you
They got the right guy for that job;-)
Excellent viewing with the simulation and camera 😊 thanks
Very nice to see! I would have thought that EDM was the only way on that part.
Excellent idea, congratulations and thank you for sharing. 👏👏👏
incrdible well made job
pete, hi from chiapas mex.
What ever happened with the truck build . Like to see a update on that . Thanks for sharing.
I did post some photos on Instagram showing the finished truck. My Instagram is Peter L Stanton.
Thanks for another great video peter! Useful to have this intersecting hole trick in mind. I would like to ask if you ever used any 'abrasive flow deburring' to deburr internal intersecting features like this?
MÜKEMMEL USTA
Apologies if this has already been covered but 2 things really caught my attention. first, you didn't really verify the part was in the chuck straight. You indicated the outboard end but not the inboard end. You then dialed in the chuck when you (possibly) should have tapped the part into alignment before adjusting concentricity. Second, the gravitational error of sweeping the part for centerline could have been a couple thou, so unless you take measures to verify, you won't know. A good touch probe is far better than a dial indicator. In our shop all the horizontal mills have probes so we don't need to monkey around with indicators for position.
You must be new to my channel. I have covered the gravity error of indicating in the horizontal position many times. This indicator and arm I use in this machine I have tested and verified the error. But yes you are correct there can be an error with some setups. As to the runout error with the clamps holding the back parts face solidly back in the jaws (in this setup) it is holding the part perpendicular to the chuck. This wasn’t the first part I did and I did check that the lathe operation had turned the parts perpendicular on that end to the other (the one I’m doing). But again you are correct this error can exist where the part could run true in one place on its diameter and not in another. If it isn’t running perpendicular in the chuck. As to the probing.The way they built this machine it only has -10mm of X axis travel before hitting its limit. So here again you are correct a spindle probe would be best. But with only 10mm minus travel I can’t reach the bottom of the part with the probe. So using it can’t be done on this machine for this purpose. I hope that clarifies your questions. Thanks.
If you jog at a high rate into the part & brake the indicator or probe, it's guaranteed you won't have spares in stock, and it'll be late on a Friday afternoon.
Dialing around the center every now and then, probably couldn't hurt. But just out of curiosity, I was under the impression that the main spindle's center is always a consistent value away from X and Y Home. The only way it could basically change is if the definition of Home got reset. Like if the travel limit stops moved at all.
This is a large machine. So temperature variations can make a difference. We are only talking about very small amounts usually less than .001”.
@@EdgePrecision That's a bit interesting. Neat. I work on 4th and 5th axis machines, and the center of rotation of the tombstone, is next to never checked. Only if something knocked into something, it would be.
Oh yes, one question: do you have simulation software in which the whole machine is modeled? If yes, which one?
My cam software has a full simulation model of the machine. I use Esprit TNG software.
o2 for thejaws?u made,., greetings from copenhagen
Why not use the spindle probe? Just curious.
@@ashleymonday_ On this machine the spindle probe works ok for things where the B axis is at 90 degrees (vertical). But because there is only minus 10mm X axis travel it’s not the best to find the X Y zero because you can’t probe all around the part on its face. So I always use a dial indicator in this case. In fact for setup on this machine I always use dial indicators. I like to see the actual deviations witch you don’t really see with a spindle probe.
Hello Peter! Is this part for Baker Hughes? How are you feeling? It feels like you are sick.
No this is not a Baker part. And I'm feeling fine. Not sure why you have that impression?
beautiful work
Thanks for your time 👍
Hi peter, Why dont you use the haimer probe to find the center without the gravitational error of the indicator?
On reason is this machine doesn’t have any more than -10mm X axis travel. So I can’t even get the Haimer probe on the bottom of the part. Also I prefer swinging the indicator around the part. With this short arm and indicator there is extremely small error not really enough to worry about. If I really wanted to streamline things I would purchase a Haimer centro gauge. I have seen this gauge and concider it precise enough as a coaxial indicator.
@@EdgePrecision thanks for your answer ! Yes it would be a hassle as you can only center the y with it
Is there not a fundamental XY coordinate in the control such that the two spindles are coaxial?
Temperature, right, duh. 😅
Talk about that tiny blower to clean out the coolent that's got to be a custom build
You ca buy on Amazon the connection for hypodermic needles. I just bought threaded one and mounted it in a blow gun. Then I could buy off Amazon needle blanks to mount in the air blow gun. It really is handy for this and blowing shavings out of tapped holes. You can buy all different sizes and diameter of these needle blanks. All with the same connection to put on the air gun.
@@EdgePrecision Hey Peter, love the idea and was trying to find the adapters on Amazon. "Luer Lock" is my best guess of the adapter and needle style from what I could find pictures of. Does that sound familiar? Thanks.
Hi Peter,
One question, do you use dynamic offset when you're using the vise?
Or different work offsets for each indexing?
Just got our new Mazak VCN-700D with a Sankyo roller cam 4th axis. I'm planning of adding a tombstone and a vise very similar to your setup. I'm trying to think of something more fail proof than using centerline rotation or multiple WCS since I'm not the only one operating the machine.
This machine is older and doesn’t have the dynamic offset option. So for this setup I positioned the part in the cam software in relation to the C axis rotation. But if you have dynamic offset option it would make things easier.
do "they" grade threaded rod like bolts?..grade 5, grade 8.?.been a mechanic all my life and I dont know this?.
Yes I think they are similar ratings.
Yes. B7, B16, and Grade 8 are common grades.
Look up online McMaster-Carr products list, you'll find threaded rod in various grades.
Yeah, the all thread you get at the hardware store is cheese grade - it's so soft you can bugger up the threads by looking at it the wrong way
Vise grip sliding hammer puller??
I have one. But as it turned out I didn't need it.
👍👍
Süper
💪👍👏
inspiration
I’m not sure what you are making here.
Can you get a camera that does a better job when focussing?
công nghệ thật tuyệt
you have to move to Europe--- we need better machinsts
Dang congrats on the views and subs, been here since the hundreds.