Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
Why would you do that? There is literally no benefit to welding them together, but there's plenty of disadvantages like warping, and compromising the bearings themselves. What a fu€|
@@wesman7837 lol but it didn’t do any of that..did it? Did your great great grandfather invent bearings or something? Lol you took this video so personally 🤣 you’re correct on the heat warping but with tac welds like that, you’ll never reach a temp high enough to seize them, especially when you take time breaks in between tacs or swapping from one to another. Now, if he was using an arc welder, then yes, he’d be an idiot but since he is using proper tools to make a HOMEMADE project, he’s perfectly fine…you sir, are the TOOL for the poor logic critiques. If you don’t agree, go make your own how to DIY vids…I’m sure we would all love to see what a genius, like yourself, can come up with while ALWAYS using the correct tool; no ifs, ands or buts!
I know. I was like "if you're skilled enough to weld bearings and have them still be functional, you make enough as a welder to afford a real tool. Or at least a pipe to slide over the bearings for a friction fit.
I dont think the end use here qualifies as "under load" in the context of your warning. It not like they are spinning at anywhere near usual bearing speed. And not close under usual pressure.
No actually it's not, although personally I would use recycled bearings but this is a great way to save a good $$$ investment in a profesional one when you might not be able to justify that cost if it's something you don't use regularly and even if you did, this one is small enough to be portable to a degree and so what if he toasts a bearing or two they are not exp and even less exp of you get them used as many times bearings get replaced if one of the bearing balls gets a flattened head so normal use for the bearing is finished but they are still in excellent shape and would work perfectly here, and used ones you can get for free many times just check outs metal recycling place. As for the build, the key here is not to put to many spot welds and the small ones he does would not compromise the integrity of the bearing for this application as long as they are minimum amount of weeks needed and fast. This is honestly a fantastic way to recycle parts I do it all the time in my shop he'll I'm still using my grandfather's shop Smith all in one so please stop the using on people doing good diy projects like this.
@@user-dg4wv9qg8k он же не проваривал весь контур так слегонца прихватил. Перегрева не было деформации тоже. Можно было бы проигнорировать данную операции и оставить пачку прижатой болтами. Но так работает его феншуй. В нем нет недостатка
Ооооо чудо. Он 3 недели готовил это изобретение. Испортил 12подшипников по 120р за шт. Ну про уголок и полоски ладно не считаю. Тисы разобрал. Сверло по металлу купил. Лифмашинку и отрезной круг. Спалил немного проволоки и углекислоты! Все для того, чтоб загнуть жестяночку. Можно было ее просто намотать на трубу нужного размера!🤣🤣🤣🤣🤣 Только не говорите автору это. А то он начнет стоить завод по производству труб!
@@oksanahutsalova8054 так твой пихарь и бежит от тебя в гаражи, лакать пиво и в картишки перекинуться, по причине твоего длинного носа, который ты суешь не в те отверстия.... Иди в соседний обсуд, там пудра на вкладке....
Хотел только написать это, но смотри как он вышел из положения но не акцентировал внимания на том что после одел кусок трубы на подшипник и провалился к ней уже🤣🤣
The welding is cool and all, but using everywhere like this makes this gadget completely unserviceable. If there's a design flaw or anything wrong with any of the components, you have to break out the grinder or scrap it
I remember when I was a kid, there were machine shops everywhere. I never got to do machine shop in school, but wish I had. A fantastic, necessary skill, in which, most work has moved offshore and most kids nowadays will never be exposed. Sad.
Don't listen to the haters. Skill and knowledge of the materials and what they are capable plus welding knowledge are all you need as you showed, however it might be good to add a note reminding anyone that wants to copy your idea to know what sections of the bearing can be welded safely and to not use to many spot welds or it can overheat and sieze the whole bearing. Awesome idea BTW 😺
Muy buena idea, pero se puede mejorar fabricando un casquillo para los rodamientos porque con la soldadura se dañan no es recomendable soldarlos, pero si la idea es buena.
За 6к купил вальцы, с доставкой, прокатывал дуги на парник, из квадрата 60*60! Можно в ручную катать, а можно и хорошим шуриком.... А здесь столько материала загублено, чтобы полоску из миллимитровки загнуть...... 🤔
🤔 scomodo dover smontare le ganasce e poi rimontarle per poter usare quel attrezzo , forse un sistema ad aggancio e viti a farfalla per bloccare era più funzionale 🤗
Приваривать к подшипникам) И вообще, зачем тратить так много времени и сил на изготовление "этого", если проще купить готовое изделие в магазине? 250 полуляхов
В любой непонятной ситуации приваривай подшипник
©Доктор Дью
Я тоже так подумал .
Это просто рай для глаз, когда вижу как варят подшипники😂
Зашёл, думаю по-любому от Матвеева есть кто то, и о да! Подшипники и сварка ммммммм...
Ооо...да...
Подшипники варят☝😳👈
Полуляхами замерить бы🤣👈
@@witowleo9118 250 из 250
Who else had a stroke when he welded the bearings
Why would you do that? There is literally no benefit to welding them together, but there's plenty of disadvantages like warping, and compromising the bearings themselves. What a fu€|
@@wesman7837 lol but it didn’t do any of that..did it? Did your great great grandfather invent bearings or something? Lol you took this video so personally 🤣 you’re correct on the heat warping but with tac welds like that, you’ll never reach a temp high enough to seize them, especially when you take time breaks in between tacs or swapping from one to another. Now, if he was using an arc welder, then yes, he’d be an idiot but since he is using proper tools to make a HOMEMADE project, he’s perfectly fine…you sir, are the TOOL for the poor logic critiques. If you don’t agree, go make your own how to DIY vids…I’m sure we would all love to see what a genius, like yourself, can come up with while ALWAYS using the correct tool; no ifs, ands or buts!
I did .-.
@@flyfish697 the issue with welding bearing is you ruin the metal's temper
@@benjamindavies1188 looks fine to me…? Lol his design worked flawlessly…
Каждый уважающий себя DIYщик должен хотя бы раз в жизни приварить подшипник...
Главный атрибут любого диайвая - приваренный подшипник
Приваренные подшипники, это круто. Круче только Чак!
You know it's gonna be a shit show when he started to weld bearings
What’s with these crap hints.
My thoughts exactly
Weld a bearing in every non-understandable situation)
I said the same thing but that is a pretty inventive ring roller.
I know. I was like "if you're skilled enough to weld bearings and have them still be functional, you make enough as a welder to afford a real tool. Or at least a pipe to slide over the bearings for a friction fit.
Доктору ссылку уже скинули?)
Замечательная поделка, все 250 полуляхов заслуживает
Сваркой по подшипникам. Ммм. Красота. 250/250 полуляхов.
Careful welding to bearings. They're very hard high carbon steel and are very likely to blow apart under load now
I dont think the end use here qualifies as "under load" in the context of your warning. It not like they are spinning at anywhere near usual bearing speed. And not close under usual pressure.
This DIY is accectable for an idi.ots only.
No actually it's not, although personally I would use recycled bearings but this is a great way to save a good $$$ investment in a profesional one when you might not be able to justify that cost if it's something you don't use regularly and even if you did, this one is small enough to be portable to a degree and so what if he toasts a bearing or two they are not exp and even less exp of you get them used as many times bearings get replaced if one of the bearing balls gets a flattened head so normal use for the bearing is finished but they are still in excellent shape and would work perfectly here, and used ones you can get for free many times just check outs metal recycling place.
As for the build, the key here is not to put to many spot welds and the small ones he does would not compromise the integrity of the bearing for this application as long as they are minimum amount of weeks needed and fast. This is honestly a fantastic way to recycle parts I do it all the time in my shop he'll I'm still using my grandfather's shop Smith all in one so please stop the using on people doing good diy projects like this.
@@LittlestrawberryfoxSo why not press fit the bearings into some tube and do it properly? This is just a hash job.
Welded bearings will be fine in this application. Very nice job 👏
Пойду в гараж наделаю завитушек из полоски железа.. Каждый день так делаю..
250 полуляхов из 250
Зря ты так! Тиски то не испорченные!.. И вещь целиком рабочая. И тиски целые, учти!
Ну да!.. 49 тысячи 900 милиляхов там точно будет!
Красавцы!!!!
Удачи вам парни!!!!!
Храни вас ГОСПОДЬ!!!!!
А если подшипники между собой не сварить они крутится что-ли не будут????????? Нахрена?
Зато точно не сопрот, будут совместно крутится. Сама идея регулируемого домашнего гибщика интересна. Исполнить можно по разному
@@Alexey-85 Но не подвергая подшипники издевательством сваркой
@@user-dg4wv9qg8k он же не проваривал весь контур так слегонца прихватил. Перегрева не было деформации тоже. Можно было бы проигнорировать данную операции и оставить пачку прижатой болтами. Но так работает его феншуй. В нем нет недостатка
Как и особых достоинств оба варианта на мой взгляд одинаковы
Это ведущий ролик, если не сварить, будет крутиться только самый верхний подшипник, к которому приварена ручка
That is pretty cool, but welding directly to bearings seems like a crime to me
Thats not welding thats tacking
Agreed, this is also non serviceable, so, even more of a crime.
@@LUK42.0 irrelevant. A tack weld is still a kind of weld
@@thedudeamongmengs2051 is not.
@@joshpiotrowski3487 yes…it is
Welding bearings is the most гетагded idea I've ever seen
Why can't u say Retarded?
Don't worry about it, he pay for not you
Ооооо чудо. Он 3 недели готовил это изобретение. Испортил 12подшипников по 120р за шт. Ну про уголок и полоски ладно не считаю. Тисы разобрал. Сверло по металлу купил. Лифмашинку и отрезной круг. Спалил немного проволоки и углекислоты! Все для того, чтоб загнуть жестяночку. Можно было ее просто намотать на трубу нужного размера!🤣🤣🤣🤣🤣 Только не говорите автору это. А то он начнет стоить завод по производству труб!
😄😄😄Убил
😅😅))😂😂))🤣🤣))😅😅))🤣🤣))😂😂))
Лучше придумывать что-то новое, чем лакать пиво или резаться в карты.
@@oksanahutsalova8054 так твой пихарь и бежит от тебя в гаражи, лакать пиво и в картишки перекинуться, по причине твоего длинного носа, который ты суешь не в те отверстия.... Иди в соседний обсуд, там пудра на вкладке....
Варить подшипник!?Сразу видно "крутая вещ" получится
Хотел только написать это, но смотри как он вышел из положения но не акцентировал внимания на том что после одел кусок трубы на подшипник и провалился к ней уже🤣🤣
А самое главное, что долговечнее, об этой самоделке можно говорить часами, внуки офигеют, какой их дед был (рукодельник)
Вызывайте Доктора!
Не поможет, нужно отобрать подшиБники.
@@SshAleksandr ПодподшиБники 🤣
@@user-kz2cz7kk8l подшипники после сварки превращаются в подшиБники.
Да и так понятно, что 250 😅
Он уже в названии канала присутствует
I just had a stroke from seeing you weld directly to bearings
-Доктор Дью, у нас тяжелый случай!!!😂
В любой непонятной ситуации вари подшипник
Срочно доктора у пациента болезнь подшипник
У автора видимо возникла непонятная ситуация 😂
Если , непонятная ситуация , нужно приварить подшипник но , судя по этому ролику , ситуация вообще критическая .
Хоть и подшипник варёный, но тиски не испортил! Прикрутил обратно губки и работай!
За неиспорченные тиски лайк!
I like watching these videos and seeing how things could be fabricated in a custom way. Thanks for the upload 😊
Насечки для слабаков, надо пихать прут силой, а крутить для видимости работы
You just welded a bearing race…put the tools down and walk away.
Гениально
🤔 How will they continue to generate their senseless clickbait, then? 😆
Глаза! Мои прекрасные глаза!🤦
I doubt those bearing still work
They do for what his intention was
The welding is cool and all, but using everywhere like this makes this gadget completely unserviceable. If there's a design flaw or anything wrong with any of the components, you have to break out the grinder or scrap it
But there wasn't and he didn't
ok? you think the guy with all these materials and shit cares if he breaks a part? hes got 50 more sitting around for these videos.
I suspect the spirit of this channel is to angle grind it off and make a new one. Kind of a shame.
В любой непонятной ситуации приваривай подшипник!
I remember when I was a kid, there were machine shops everywhere. I never got to do machine shop in school, but wish I had. A fantastic, necessary skill, in which, most work has moved offshore and most kids nowadays will never be exposed. Sad.
Ahhh capitalism
Ооо дааа Доку это понравится!
In any incomprehensible situation, weld the bearing
Варёные подшипники... Классика!!!!
Молодец дружище Отличная Самоделка👍👍👍👏🤳😁👆✌️👉👍👍
Повелитель металла😁🔥
Приварил подшипник к шпильке - рука-лицо
Who the hell welds roller bearings
The guy in the video did.
@@unclepecos845 lol, true)
сваривать коленые подшипники, это точно на все 100% надежно
Don't listen to the haters. Skill and knowledge of the materials and what they are capable plus welding knowledge are all you need as you showed, however it might be good to add a note reminding anyone that wants to copy your idea to know what sections of the bearing can be welded safely and to not use to many spot welds or it can overheat and sieze the whole bearing. Awesome idea BTW 😺
That'd be a roller my brother. Bender bends things. Rollers roll things. Love it tho! Great job!
Подшипник. Крутая идея для чего-то,что бы затем в утиль..
Así es como surgieron las miles y miles de herramientas que es xisten y seguirán creciendo. Creatividad, ingenio. Excelente !!
That is so cool man😲
Nice👍👏👏
I too like my bearings nice and crunchy and not precision ground anymore
Totally Awesome Craftmanship. 👌 👏 👏
Muy buena idea, pero se puede mejorar fabricando un casquillo para los rodamientos porque con la soldadura se dañan no es recomendable soldarlos, pero si la idea es buena.
The step drill is the mark of every hack.
В любой непонятной ситуации - приваривай подшипник!)))
Поиду во круг трубы завальцую))
I would've pressed fit into a sleeve instead of welding. Better smoother finish.
Great idea
Идея хорошая ! Но Исполнение на 255 из 250!
За 6к купил вальцы, с доставкой, прокатывал дуги на парник, из квадрата 60*60! Можно в ручную катать, а можно и хорошим шуриком.... А здесь столько материала загублено, чтобы полоску из миллимитровки загнуть...... 🤔
Ну наконец-то ,хоть кто-то приварил подшипник
That was badass!
Аж глаза зажгло, от того как варят подшипники.... Доктор Дью, помоги!!!
Т.е. то, что у подшипников опустилась закалка и они стали пластилиновые, и возможно внутри расплавится пластиковый сепаратор - это нормально.
Это все так и задумано!
Походу точно хуета 😳👈
He literally welded the bearings core with its outside. It's just a cylinder now. Wow.
Excelente ideia! Parabéns!
Доктор! Тут диайвайщик подшиБник приварил!
Сваривать подшипник это шедевр
Сварка подшипника ну-ну... 👍
Dude you are as smooth as the music that you play in the back ground. Well done👍👍👍
Me agrada esa broca. En dónde venden dígamelo .y gr por. Pista maestros .
What a fuxxing brillant Nice Idea, Beautyfull, Bravo Bravo and thank you.
🤔 scomodo dover smontare le ganasce e poi rimontarle per poter usare quel attrezzo , forse un sistema ad aggancio e viti a farfalla per bloccare era più funzionale 🤗
Варить подшипники???
250
Гений,варить к подшипнику
В любой непонятной ситуации приваривай подшипники.
Что бы не тратить столько подшипников и не сваривать их, можно пользоваться трубками
Сваривать подшипник гениальная идея.
Доктор! Доктор! Тут опять подшипники варят, срочно выезжай
После сварки подшипника дальше можно не смотреть.
Мне бы такие руки, что бы сверлить точное отверстия с такой разметкой.
А ты разве не знал, что все крутые рукожопы (простите мастера) размечают только маркером? Причём чем толще тем точнее получается.
@@dmitryk4992 ..."точность попадания компенсируется диаметром снаряда"...
На досуге, разбери хоть один подшипник и посмотри, что получается В МЕСТЕ КОНТАКТА ШАРИКОВ С ОБОЙМАМИ!
Варить к подшипнику- наше всё !
Куда же без приваренных подшипников!!??))
Идея хорошая но зачем подшипники приваривать,
Если приваривают к подшипнику - можно листать дальше
Ingenio y creatividad 👍🏻👍🏻👍🏻
Доктор Дью видел это?
Хорошо хоть сварка не электродом.
В любой непонятной ситуации приваривай подшипник 😂
Classy channel 🥃🛠️😎
The tool was great and useful
The music gets me everytime tho.🎶🎛🙏🏾
👍😆👍 BUEN VIDEO GRACIAS 👍😆👍
В любой непонятной ситуации приваривай подшипник
А ведь можно было обойтись и без приваривания подшипников
Приваривать к подшипникам)
И вообще, зачем тратить так много времени и сил на изготовление "этого", если проще купить готовое изделие в магазине?
250 полуляхов
В любой непонятной ситуации просто приваривай подшипник
This is some clean work
Эх если бы и у меня руки росли отдуда)👍
Very good 👍
Дью в студию🤣
Bạn làm rất tốt thật tuyệt vời
Çox sağ oll sənətkar
Ещё один ненормальный подшипники варит🤦♂️
Me gustó tu trabajo, pero, me gustaría que me digas qué tipo de soldadora empleaste, si es TIG o MIG,
حقا لقد استمتعت كثيرا في هذا الموضوع المفيد