thankyou!!! your neutral was what i wanted to learn, the other are the three phase wires then neutral! but you taped up the three neutral not to use them
Hola buenas de donde compraste el controlador funciona con corriente Alterna o se necesita rectificar o se puede usar directo a una batería de 12 vols gracias
Hello I have a question. I am trying to build this alternator but am having problems with the alternator.Here is what happened...when I took the rotor out,two contacts came up,I think they are called brushes.When I wanted to put the rotor back in,they blocked the process. I had to fix the brushes with a piece of tape to put it back in the old place.now I have a tape on the contacts and the generator does not work.how did you solve the problem?thanks for your answer
Parece que algumas pessoas estão confundindo "energia infinita" ou com gerador. O projeto é a conversão de um alternador para um motor BLDC! Parece bom projeto, tenho visto uns parecidos. Seria bom saber o torque.
Eso es falso no funciona en esas condiciones, cuando se aumenta el diámetro del rotor, este no puede acomodarse al relator más aún si se añade una capa de pegamento más no están claros los parámetros de velocidad y voltaje del generador
Non funziona, anche se metti i magneti resta un sincrono, per cui non parte spontaneamente, devi avviarlo con un motore di lancio o come un asincrono e poi devi stare attento all'angolo di carico , infatti se non ha l'angolo corretto perde il passo e si ferma o comunque non ruota in regolare. Se avesse un sensore per capire posizione rotore allora sarebbe un bld ovvero brushless. scusami la critica ma sarebbe tropo comodo altrimenti basterebbe alimentare lo statore con onda trifase e eccitare il rotore, ma non parte non ha un funzionamento corretto.
Finalmente un italiano 😀 Sarebbe interessante sapere la differenza di rendimento con il magnete originale oppure con quelli aggiuntivi. Eppoi si potrebbe fare una prova pazza: oltre i magnati aggiuntivi alimentare il rotore con l'apposita polarità, dovrebbe aumentare la coppia.
ขอบคุณมากครับ ที่ทำ clip ดีๆ เข้าใจง่าย และเป็นประโยชน์มากครับ
Good bro 😊
ขอบคุณแนวคิดดีๆๆครับ❤❤
Good bro 😊
ลองทำตามได้ผลดีมากๆครับ
รอติดตาม วิธีการต่อ Hall Sensor อยู่นะครับผม ขอบคุณสำหรับคลิปดีๆครับ
Nice bro 😊
thankyou!!! your neutral was what i wanted to learn, the other are the three phase wires then neutral! but you taped up the three neutral not to use them
Good bro 😊
Hi, thanks for your video, which version have more torque? With or without permanent magnet?
Good bro 😊
Subscriber from Tamilnadu❤
. nice bro 😊
สุดยอดครับ
ขอบคุณมากครับ
Hola buenas de donde compraste el controlador funciona con corriente Alterna o se necesita rectificar o se puede usar directo a una batería de 12 vols gracias
Nice video, thanks :)
ทำคลิป ติด hall sensor รึยังครับ /รออยู่
Thank you for a very interesting video. I am trying to make a PMA on my channel using neodymium magnets.
Good bro 😊
Wow! Very cool idia thank u sir
Nice bro 😊
หาซื้อแท่งแม่เหล็กได้ที่ไหนครับ
ไดที่เอามาทำยังใช้ได้ปกติหรือพังแล้วครับ
عمل قمة الروعة فعلن تحية من العراق
Go😊
วัดกำลังเอ้าพุต ทางกลให้ดูได้ไหมครับ ผมสนใจ อยากทำบ้าง
I have delco 12si alternator how turn that to bldc motor?
It has no center tap wire
Super video. I like 💖 it
Nice bro 😊
มอเตอร์ของผมมีสายอยู่ 4เส้น ต้องต่อแบบไหนครับ
Hello I have a question. I am trying to build this alternator but am having problems with the alternator.Here is what happened...when I took the rotor out,two contacts came up,I think they are called brushes.When I wanted to put the rotor back in,they blocked the process. I had to fix the brushes with a piece of tape to put it back in the old place.now I have a tape on the contacts and the generator does not work.how did you solve the problem?thanks for your answer
Nice bro 😊
แล้วแปลงถ่านที่ติดมาละครับเราจะต่อใข้งานไหมครับ
Привет. Какой клей вы использовали?
So good,Thanks.
😊😊😊
ส่งไดร์ชาร์จไปให้ทำให้ได้มั๊ยครับ
How many volts did you supply to the brushless controller?
Good
Hello, very good video. If you put 36 Vdc to alternator it will go faster?
How many rpm?
?
Can you help me , because i have 36v battery 36v speed controller and alternator with magnets and I don't know if it works well ?
@@odysseaschrisikopoulos7162 36V. generate more heat. tested
แผงวงจรหาซื้อที่ไหนครับ
อยากได้บอร์ดควบคุมหาซื้อได้ที่ไหนครับ
What is that circuit board where wires are connected?
نرجو الرد
Super. 👍 👏
Good evening, how many amps does the dynamo output when it is running?
Good bro 😊
เอามาดัดแปลงไส่โม่ปูนdiyได้มั้ยคับผสมครั้งละ1/2ลุกคับชอบแนวทางคับ
ได้ครับ แต่ควรจะมีทดรอบเยอะหน่อยครับ ถึงจะได้แรงบิด
ใส่รถป๊อบชาลีไหวไหม
good work
Imagina o campo magnético q esse negócio vai ter
ได้เช็คกระแส,แรงดัน,กำลัง, ไหมครับว่าได้เท่าไหร่
สอนติด hall หน่อยครับพี่
Is the Alternator 12v or24v?
Super👍
Parece que algumas pessoas estão confundindo "energia infinita" ou com gerador. O projeto é a conversão de um alternador para um motor BLDC! Parece bom projeto, tenho visto uns parecidos. Seria bom saber o torque.
😊😊
Só faltou testar o torque, coloca uma correia pra tocar algo.
ถ้าใช้สวิทชิ่ง 24 โวลท์ ต้องใช้สวิทชิ่งกี่แอมป์ครับ
ลองเทสที่ 36V. ให้ดูหน่อยครับ
จะได้รอบมากกว่าเดิมไหม
มอเตอร์ร้อนมากครับ ผมว่าไม่น่าจะดี
แม่เหล็กขนาดเท่าไหร่ครับ
I like it
Where to buy old car alternator
👍 👽
احسنت عمل رائع
can you give us the name of the glue that you used? thanks
Its most likely "JB Weld epoxy" is very strong for joining metals.
ไชกับแผงโชลาเชลไดบอ
ผมเคยทำแล้วแม่เหล็กหลุดพังหมดเลย กาวสองตันเอาไม่อยู่ ใช้กาวอะไรยึดแม่เหล็กครับ
กาวซีเมนABร้าน20บาทครับ
Good 😊
ผมติดด้วยกาวตราช้างแน่นสนิทเลยครับ
ทำเป็นมอเตอร์ รถ มอไชไฟฟ้าได้ไหมครับ
Power output Watt?
Boa noite felicidade paz por que não ficou ligado permanente era para ficar com imã sul com norte metade do sul com norte permanece infinita.
سوف اقوم بتجربة
Running noisy, maybe bearing worn out?!
škoda že nerozumiem...polarite
Eso es falso no funciona en esas condiciones, cuando se aumenta el diámetro del rotor, este no puede acomodarse al relator más aún si se añade una capa de pegamento más no están claros los parámetros de velocidad y voltaje del generador
i am not interested of the speed..the current output should be upon putting some magnet...okey
Berapa bikin kayak itu bos. Untuk motor listrik
Acayip dönüş var
Non funziona, anche se metti i magneti resta un sincrono, per cui non parte spontaneamente, devi avviarlo con un motore di lancio o come un asincrono e poi devi stare attento all'angolo di carico , infatti se non ha l'angolo corretto perde il passo e si ferma o comunque non ruota in regolare. Se avesse un sensore per capire posizione rotore allora sarebbe un bld ovvero brushless. scusami la critica ma sarebbe tropo comodo altrimenti basterebbe alimentare lo statore con onda trifase e eccitare il rotore, ma non parte non ha un funzionamento corretto.
Finalmente un italiano 😀
Sarebbe interessante sapere la differenza di rendimento con il magnete originale oppure con quelli aggiuntivi. Eppoi si potrebbe fare una prova pazza: oltre i magnati aggiuntivi alimentare il rotore con l'apposita polarità, dovrebbe aumentare la coppia.
لماذا لا يوجد رد على الاستفسارات الخاصه بالمتابعين
Chào ngài ngài có thể cho tôi . Xem cách kết nối của rotos 3pha không.tôi chờ ngài
Halo apa nama rangkaian tersebut dan type natau seri berapa
بس عني ﻤلاحظه دوران داينموا بماذا كيف دوان
Bundan çok güzel bileyim taşı olurmu
Как я понял из любого генератора можно зделать????
Turbūt bus tęsinys kaip jį panaudoti praktikoje.
I did the same as you. I got 29 volts and 0.3 Amps, which is too little to burn even the smallest 12 Volt bulb. That's why I don't believe you.
I like it sir .I need a magnetics 30 pices please collect and parcle send me sir please I am send by Amount please reply sir
S/N
Daha çok mıknatıslı mi olur
얘 보다 머리 좋은 한국인들이 저거 안해보았겠나 성공했으면 유튜브에 도배했을거다 한국인이 실패했다면 한국인들의 영상이 없는거다
Што такой буква s ю
Fuu report
Fake 100%
E.buona.idea.piu.aprfondita
نمبر.دیدو