What a fantastically neat job. I just ended up cutting a big jagged piece from front to back rather than a nice neat hole. Wish I'd seen this first. Brilliant job.
It would be helpful to actually see them come out.....space still looks very tight for number 5. Otherwise...many thanks for the video....and a lovely neat job!
It is misleading.... he hasnt shown how to remove 4/5. After I had done this, I had found injectors 5 was in fact stuck. And although this whole is great to actually see the injector... its of no use to get it out. Thr windscreen sticks out past the injector and you can t get a slide hammer in there. Has been an impossible job to do....
@@jamesreitsma757 Hi James... Yes it's very difficult. However I did get mine out...after cleaning up a whole lot of 'black death'....carbon. I used oven cleaner and carb cleaner over several days to soften the carbon, and to soak down into the injector recess around the stuck injector. What I did was to 'lever' the injector out with the base part of the slide hammer. This actually worked very well. I levered in in several goes, using a bolt as a spacer under the slidehammer fork to give me leverage as the injector started to come out. This way the base of the screen wasn't in the way as I was levering the slide hammer fork towards the front of the car. All I can say is it worked for me....and I was happy when it came out! Now I have to drill and rethread the injector bolt hole....but that's another story!! Good luck with it. It can be done....it would have been good if the video had shown the actual removal though.....but as with all of these jobs you have to get stuck in and work things out for yourself sometimes. I hope this helps!
Good video mate I cannot believe that jeep didn't make a similar inspection bay from the project
What a fantastically neat job. I just ended up cutting a big jagged piece from front to back rather than a nice neat hole. Wish I'd seen this first. Brilliant job.
It only takes like 3-4 hours to lower the engine, fix the injectors and put it back up :):) No need to cut away pieces of the car.....
Haha, your assuming that none of the injectors are actually stuck in the motor......
3-4 hours to lower the engine? Tell me how
You are not a mechanic if you telling that BS. Period.
@@janpekar1476You are right bro. Obviously he has know clue what he is talking about.
It would be helpful to actually see them come out.....space still looks very tight for number 5. Otherwise...many thanks for the video....and a lovely neat job!
It is misleading.... he hasnt shown how to remove 4/5. After I had done this, I had found injectors 5 was in fact stuck. And although this whole is great to actually see the injector... its of no use to get it out. Thr windscreen sticks out past the injector and you can t get a slide hammer in there. Has been an impossible job to do....
@@jamesreitsma757 Hi James... Yes it's very difficult. However I did get mine out...after cleaning up a whole lot of 'black death'....carbon. I used oven cleaner and carb cleaner over several days to soften the carbon, and to soak down into the injector recess around the stuck injector. What I did was to 'lever' the injector out with the base part of the slide hammer. This actually worked very well. I levered in in several goes, using a bolt as a spacer under the slidehammer fork to give me leverage as the injector started to come out. This way the base of the screen wasn't in the way as I was levering the slide hammer fork towards the front of the car. All I can say is it worked for me....and I was happy when it came out! Now I have to drill and rethread the injector bolt hole....but that's another story!!
Good luck with it. It can be done....it would have been good if the video had shown the actual removal though.....but as with all of these jobs you have to get stuck in and work things out for yourself sometimes.
I hope this helps!
Just what I needed thank you so much.
Herrlich, steht mir auch noch bevor.
Number three has just gone on mine luckily I managed to catch it in time before made too much of a mess ....dreading number four and five though LOL
i am just removing the whloe engine ....great job
Very good!!!Thx!
Thanks for information
Génial 👍💪
Excelente
Better with the 3.1 td engine
❤
Thenks😁👍
C'est fait pour moi et c'est parfait...
sensacional eu pensei em fazer na minha
Fajnie tylko po co?? Silnik do pozycji serwisowej wymiany wtryskiwaczy ustawia się w 45 min,
👍👍👍
Engine put down in 5 inch
Hello
Кла 👍👏
DONT NEED THE STUPID MUSIC FFS
Hello, the software assigned me this warm music automatically. Turn off the sound and ignore it.😉
Thebil