I'm going to use OSB for an interior partition wall. In a house but I think it will work nice. Ill sand and clear with a low gloss. But keep the colour itself light. one side will have a glass panel door. Aside from that there's something satisfying about filling in a new wall. Even just watching the process being done
Thank you for making this video, I just wanted a temporary wall and everyone has to make things so permanent, but this is perfect! Also you remind me of an elf when you hit all the wood with your hammer lol
Guy is a professional and building it for a customer. If the customer cheaped out on the project or had limited budget then simpler and less materials used. Stop trashing the guy here
😂😂 wenn ich die Möglichkeit habe die Wand vorher zu bauen, dann beplanke ich sie auch vorher. mit Kleinformat.250x62.5. und nur 12mm . statisch 15mm und Großformat. wandhoch!!! Anfänger. blutiger!!
Hello, can you tell me what material you use for the osb panels? I installed OSB panels on the ceiling, so now I would like to paint them white, but I don't know what, that is, what material do you recommend. Thanks in advance.
Minha parede de osb ficou com frestas (de uns 5mm) entre as chapas (11 frestas/11 junçoes de chapas). Será que resina veda essas frestas? Com qual materia posso vedar? tentei fitas mas desgrudam. Que materia barato serve para tapar as frestas? Obrigada❤
I'm going to use OSB for an interior partition wall. In a house but I think it will work nice. Ill sand and clear with a low gloss. But keep the colour itself light. one side will have a glass panel door. Aside from that there's something satisfying about filling in a new wall. Even just watching the process being done
Thank you!! Been searching for like, almost 3 yeard for this concept. Thank you!
Thank you for making this video, I just wanted a temporary wall and everyone has to make things so permanent, but this is perfect! Also you remind me of an elf when you hit all the wood with your hammer lol
One man army right there. Good job man, honest hard work
Guy is a professional and building it for a customer. If the customer cheaped out on the project or had limited budget then simpler and less materials used. Stop trashing the guy here
Congratulations mr. Beard. You did it
Finally someone working with SHOES ON! I swear RUclips/DIY doesn’t mean socks,flip flops while working 😂
Workshop Wall Partition with OSB Boards thật tuyệt vời 👍👍👍
amazing i tried mailing you for few doubts but the mail didnt go through please suggest how can i get across ❤❤❤🙏🇬🇧
Hello. What is the thickness of the OSB sheets you have used?
Thanks
Atul SC
23/32 inch (18.2 mm) or 3/4 inch (19.0 mm) is the standard for this type of wall
haha.12mm or 15mm.
😂😂 wenn ich die Möglichkeit habe die Wand vorher zu bauen, dann beplanke ich sie auch vorher. mit Kleinformat.250x62.5. und nur 12mm . statisch 15mm und Großformat. wandhoch!!! Anfänger. blutiger!!
Thanks I learn something new today
Lo ví todo ,está muy bonito ,gracias me ayuda mucho 🤝🤝
Can I make this structure to put on a balcony?, I would like to put glass. But I don't know which wood to withstand the rains.
আমার মতো জারা ছোট্ট ইউজার আছেন চলেন একে অপরকে সাপর্ট করি তাহলে সবাই একসাথে লক্ষে পৌঁছাতে পারবো ইনসায়াল্লাহ্ ❤❤❤❤
Can u please tell me how many cost for this type of wall partition... Please tell me🙏
I’m not a professional but for the lumber and plywood probably a couple hundred bucks total would be my guess.
This play is more chap then athers
Hello, can you tell me what material you use for the osb panels? I installed OSB panels on the ceiling, so now I would like to paint them white, but I don't know what, that is, what material do you recommend. Thanks in advance.
Is it possible to build something without drilling the wall/floor? Something depends on wheel/lifting the boards against the roof.
wow, I wanna build such stuff
did he check for square?
Wood work like this is perfect just in south Africa where do we buy them?
Nice work 👌🏻
can we put a dry wall in front of it ?
Did you sand off the black markings/lines?
Please 1 video for me that is explain how to make a small study room with plywood
Very Very good sar
Nice work
Hola. Se puede usar planchas de 9mm o 12mm para dividir una habitación?
Minha parede de osb ficou com frestas (de uns 5mm) entre as chapas (11 frestas/11 junçoes de chapas). Será que resina veda essas frestas? Com qual materia posso vedar? tentei fitas mas desgrudam. Que materia barato serve para tapar as frestas?
Obrigada❤
Tenta ver se consegue vedar as frestas com calck que não seja de silicone, pois depois da pra pintar.
@@marim5492 Provavelmente vai dar certo mesmo! Obrigadao pela dica! Ja to pesquisando😊
Great idea
is this washable?
How thick should the OSB Panel be?
23/32 inch (18.2 mm) or 3/4 inch (19.0 mm) is the standard for this type of wall
y cuanto miden los palos?
Superb
Very good
Very beautyful
How many price
boarding doesn't consist of ALL abroad
Muchos likes
এইগুলো কোথায় পাওয়া যাবে আর কত খরচ পড়বে
So the diy is you have to know what your doing. Got it
cuanto mide la madera
Wow. Let call it ply board while we're at it
Kitna by kitna inch ka lakdi hai
Banane mein kharcha Kitna lagta hai
Из гипсокартона проще и дешевле
free standing partition(s) {%|\}
👏🏻👏🏻👏🏻
Cool ya aprendí
Price kiti
Why?
😮
👌😎
প্রতি বর্গ ফিট দাম কতো এগুলা বোর্ডের??
Investment bhi btao yaar
Square foot banane ka Paisa Kharcha
Cheap and stupid are a dangerous combination.
Gooodd
This is not how this is done. What a joke!
ভাইয়া মিস্ত্রির নাম্বার টা দেওয়া যাবে
apna nabr du
Economic??😂😂
fuck
Baught Sunder
39k
Bhai aapaka no. Send karo