ive found it useful for production. .print and cast. . is to to the text curves only. .then remove sharp corners. then extrude with draft. thank you again pj. .great content!
Yes that seam is a trouble-maker! 🙃Great instructions on rebuild that make everything so smooth. I have certainly made all these mistakes a few times. Thank you for sharing such clear instructions in everyone of your videos🥰
Hello PJ Chen! Thanks for the videos they are all so good! I have a question, the command createUVcurve and UnrollSrf are both ok right to flat a surface? It does not reflect changes in the final result..? Thanks!!
unroll only apply to the flat surface or polysurface. it cannot apply to the doubly curve surface like sphere. I have a video discuss the difference at ruclips.net/video/L2dYFw-4GLY/видео.html
Hey pj I used the command to flow a menorah to do a Boolean difference but the Boolean failed any reason why it happened all surfaces are closed and the extrusion intersects
I love going back through your tutorials when I have a similar project, thankyou
You are so welcome!
Appreciate you explaining about the seam...I have definitely fought that problem in the past!
You are so welcome!
ive found it useful for production. .print and cast. . is to to the text curves only. .then remove sharp corners. then extrude with draft. thank you again pj. .great content!
Super!
Yes that seam is a trouble-maker! 🙃Great instructions on rebuild that make everything so smooth. I have certainly made all these mistakes a few times. Thank you for sharing such clear instructions in everyone of your videos🥰
Great to hear!
Thanks a million, Master Chen!
You are very welcome!!
very interesting!! very simple explanation by the way!!thanks a lot PJ. 👏👏
Glad you liked it!
Excelente tutorial . Muchas gracias. Excelente explicación.
Glad you enjoy it!
Thanks PJ
You are welcome, Martin.
I'll always $upport your EXCELLENT channel because I have manufactured and profited from your well-explained designs.
Thank you!!
REALLY HELPFUL!. Thanks!!!.
happy to hear that !!
Thank you so much for this tutorial! How do I scale just the one edge? I tried Scale1D but it scales the whole rectangle proportionately
If you have Gumball. Hold the Ctrl+Shift and select one edge.
thanks i need it
Great!
Hello PJ Chen! Thanks for the videos they are all so good!
I have a question, the command createUVcurve and UnrollSrf are both ok right to flat a surface? It does not reflect changes in the final result..?
Thanks!!
unroll only apply to the flat surface or polysurface. it cannot apply to the doubly curve surface like sphere. I have a video discuss the difference at ruclips.net/video/L2dYFw-4GLY/видео.html
@@PJChenJewelryDesign Thanks! You are the best!!
What about the top letters, having a draft angle for printing/casting. Is that an issue if they are straight?
You can always flow the curve instead of solid and extrude tapper with preferred draft angle
Hey pj I used the command to flow a menorah to do a Boolean difference but the Boolean failed any reason why it happened all surfaces are closed and the extrusion intersects
are the seamof the parts aligned?
How do I apply text like your "CHEN" if my model is a mesh and not a surface?
you may "quad remesh" it to Subd and back to Nurbs, then rebuild the surface.
is it possible to 3d print this? Along with the colours.
once you boolean all parts together, you can export stl for 3D printing
My friend, is it possible to engrave a personal picture on any laser machine using the rhino program?
You don't need Rhino for laser engraving. Adobe Illustrator can do it.
Magic 24.0 class?
Yes that's very helpful nice work thanks sir
Most welcome
👍👍👍👍
Thanks
If only your computer will follow all the commands of the software!