Many think this man a genius. But in fact, he is a great professional. And intelligent. You know what you're doing. And for sure you've made mistakes but never gave up and moved on. That's the biggest lesson. Many see only the end result. Many only applaud when you cross the finish line, but forget that between the beginning and the end, there was a path to be traveled. A hug from Brazil.
I've been following you for a long time, and I love your work, I don't even know if you read English, I'm writing to you from Italy. Really nice ideas your work compliments. The only 3 things I would add to this project, are 1 acoustic warning / horn to signal the presence on narrow streets with double passage. 2 some sponge to that seat to make it more comfortable during the trip. 3 of the fenders / mudguards on the rear wheels to protect the back from any splashes of water when passing over puddles. Anyway, I really like how you work. 👌👍👋
Nice. When you flatten that steel tubing if you use something with a radius instead of that flat edge on your press to smash the tubes then the crease made from crushing the tube will be on a radius too. This way it is stronger , because that straight crease made by that straight edge on your press will allow the tube to be bent real easy at that crease. In other words that flattened part of the steel tubing can fold over really easy now because it has a straight crease. A rounded crease make it so it can't bend over so easy. But how you did it is totally fine for a bike most likely. Just a tip on some metal working. If you look at stuff made by corporations that have been around they will have the radius, that way they can use the cheapest thinnest tubing for the application, so they use every trick in the book to make things stronger without adding expense. I love your overall design, nice job.
Амортизаторы упираются в балку которая приварена в двух местах, так что идет большая нагрузка на излом, это первое что сломается, и конструкция сложится. Мотор-колеса не защищены от прокручивания, т.к. не зафиксированы уши, в результате в какой-то момент кабель будет накручен на ось и обрублен.
Да конец просто. Смотрел и до последнего надеялся, что добавит распорку. Начал делать сиденье, думаю: фухх ну вот сейчас сделает. А нет, сделал этот узел еще более нагруженным и недолговечным.
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna. Mere channel ka nam. Mr yogeshk Disref karne ke liye sorry par ak bar Jana jrur
He has built atvs before. I will give you a list of the titles. """Build a Mini Quad Bike at home - Using 2-Stroke 49cc Engine - Tutorial"""" """"Build a Buggy UTV Go kart at Home - Electric Car DIY - Tutorial"""" """Mini ATV Quad Bike DIY""""
Add a number of poles and a layer for solar panels overhead for power and weather protection. Nice video. Wish all the items I needed were always on top of the pile or in front, always on the bottom or tucked away behind everything else. Must be karma
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna. Mere channel ka nam. Mr yogeshk Disref karne ke liye sorry par ak bar Jana jrur
Mene ak channel bnaya hai jis par me electronic rileted videos datla hu aagar aap ko electronic me interest hai to mere channel par ak bar Jana jrur. Mere channel ka name. Mr Yogeshk
Mene ak channel bnaya hai jis par me electronic rileted videos datla hu aagar aap ko electronic me interest hai to mere channel par ak bar Jana jrur. Mere channel ka name. Mr Yogeshk
Apart from unfinished metalwork, burr and rough edge removal, I would think the bumpsteer on that contraption might break your arms, before it breaks something else like the very weak pivot point at the articulation, just love the way it flexes under the weight of the builder, rather you than I mate.
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna. Mere channel ka nam. Mr yogeshk Disref karne ke liye sorry par ak bar Jana jrur
Excellent work. How the two motors with their individual controllers remain in sync while driving straight. And how the motor differential speed is achieved on curves?
I would have spread the rear wheels apart more, make it wider, with that configuration, you will have to drive slow on curves, turns and bends or risk flipping the whole thing and go tumbling away like Jeremy Clarkson in his robin reliant. (look it up its good fun) Also you could have placed the pivot of the steering right up to the cargo box, you have plenty of space to turn the wheel afterwards. As always i enjoy seeing your build process and the end result. Cheers.
Reverse trikes handle like cars, the front wheel on the outside of turn prevents role overs. The Robin Reliant has nothing on the front to counter the weight shifting to the side. Also, how fast do you think he plans to go around turns?
Mene ak channel bnaya hai jis par me electronic rileted videos datla hu aagar aap ko electronic me interest hai to mere channel par ak bar Jana jrur. Mere channel ka name. Mr Yogeshk
I have a question? What type name of the metal that tube like? And and can I use it for my scooter motorcycle as cargo? Thanks and im a subscriber from philippines always watching your vid
Mene ak channel bnaya hai jis par me electronic rileted videos datla hu aagar aap ko electronic me interest hai to mere channel par ak bar Jana jrur. Mere channel ka name. Mr Yogeshk
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna. Mere channel ka nam. Mr yogeshk Disref karne ke liye sorry par ak bar Jana jrur
Меня всегда забавляло как этот чел выбирает из сотни одинаковых новых запчастей, лежит у него несколько десятков покрышек совершенно одинаковых, видно что новых, а он все равно умудряется выбирать между ними как будто они чем то отличаются
Many think this man a genius.
But in fact, he is a great professional.
And intelligent.
You know what you're doing.
And for sure you've made mistakes but never gave up and moved on. That's the biggest lesson. Many see only the end result. Many only applaud when you cross the finish line, but forget that between the beginning and the end, there was a path to be traveled. A hug from Brazil.
Ummid Anta
5000
I've been following you for a long time, and I love your work,
I don't even know if you read English, I'm writing to you from Italy.
Really nice ideas your work compliments.
The only 3 things I would add to this project, are
1 acoustic warning / horn to signal the presence on narrow streets with double passage.
2 some sponge to that seat to make it more comfortable during the trip.
3 of the fenders / mudguards on the rear wheels to protect the back from any splashes of water when passing over puddles.
Anyway, I really like how you work. 👌👍👋
Your such a nice person I'm sure he will also appreciate constructive criticism like i do.
Very nice, i don't know why they don't sale this kind of bike here, rather useful. Tumb up, well done !
You are a very creative person. Every single video of yours is amazing. thank you for interesting technical creations!!!!
You gave those wheels the ride of their life, well done.
O'zbekistondan salom bro
My brother, China is the planet of creativity
😅
Nice. When you flatten that steel tubing if you use something with a radius instead of that flat edge on your press to smash the tubes then the crease made from crushing the tube will be on a radius too. This way it is stronger , because that straight crease made by that straight edge on your press will allow the tube to be bent real easy at that crease. In other words that flattened part of the steel tubing can fold over really easy now because it has a straight crease. A rounded crease make it so it can't bend over so easy.
But how you did it is totally fine for a bike most likely. Just a tip on some metal working. If you look at stuff made by corporations that have been around they will have the radius, that way they can use the cheapest thinnest tubing for the application, so they use every trick in the book to make things stronger without adding expense.
I love your overall design, nice job.
5000
Awesome! Great creativity and craftsmanship. Love your builds. God bless
thank you for making the world a little better
Cool build !!! Practical and easy to make !! 👍🏻👍🏻👍🏻😎
Uzun zamandır proje bekliyordum çok güzel🤩
Амортизаторы упираются в балку которая приварена в двух местах, так что идет большая нагрузка на излом, это первое что сломается, и конструкция сложится. Мотор-колеса не защищены от прокручивания, т.к. не зафиксированы уши, в результате в какой-то момент кабель будет накручен на ось и обрублен.
Да конец просто. Смотрел и до последнего надеялся, что добавит распорку. Начал делать сиденье, думаю: фухх ну вот сейчас сделает. А нет, сделал этот узел еще более нагруженным и недолговечным.
Enjoy the builds however I wish you could use upright angle bracing to relieve load bearing stresses on the cargo pivot.
Love From Bangladesh 🇧🇩
I wish I had half the talent some of these DIY channels do. I have a big idea that I want to make but no skills or know how to get it done.
Saludos desde guadalajara jalisco México muy buenos videos creative chanel
Очень хорошая Лада получится, если так машины у нас начнут делать
like a boss! he's come such a long way from his earlier vids =)
Men we love videos like this good your brother from Morocco AB 👍👍👍❤❤
Congratulations 6 million subscribe
Another GREAT PROJECT!!
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna.
Mere channel ka nam. Mr yogeshk
Disref karne ke liye sorry par ak bar Jana jrur
这哥们仓库里面的备用零件很丰富！👍， 光是这些材料就需要很大一笔资金，大家觉得呢？
Perfect. congratulations on the work
Hi, Kenh!! From the USA!😀
I have followed your work from Zambia. But where can I buy attachment to the timeout wheels . Can you send me motor s to fit in the time.
Top prototype car builder!!!👍💪
King! Can you build a ATV?
Not a Electric one
By seeing what he's done so far, im sure that he can build pretty much anything
He has built atvs before. I will give you a list of the titles.
"""Build a Mini Quad Bike at home - Using 2-Stroke 49cc Engine - Tutorial""""
""""Build a Buggy UTV Go kart at Home - Electric Car DIY - Tutorial""""
"""Mini ATV Quad Bike DIY""""
Can I have your Instagram or anywhere I can contact you please please bro
I think it can be done with different suspension
Klasse Idee super Arbeit weiter so👍👍👍👍👍👍👍
Add a number of poles and a layer for solar panels overhead for power and weather protection. Nice video. Wish all the items I needed were always on top of the pile or in front, always on the bottom or tucked away behind everything else. Must be karma
First to comment 😌😌 amazing innovation
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna.
Mere channel ka nam. Mr yogeshk
Disref karne ke liye sorry par ak bar Jana jrur
It just lacks the lighting
@14:48 Ahh! I see you decided to "Make it Extreme" with the paint job. 😄
Come al solito sei fantastico x la perfezione qualche accorgimento in più tipo parafanghi sulle ruote oppure unaltro cestello sulle Ruote posteriore
il est genial ton systeme de transporteur electrique
Ese diseño está chido bueno para vender helados 😊😊😊
It's very good! :-) The light and indexlight are missing!
right i like lights
You are the best
overall is good, design.. i think make door at the front for easy loading will be nice
Como sempre trabalho magnifico
good Garage
Thats nice im realy happy that your stily making video and they are stily realy good.
Sangat kreatif sekali,cuman suku cadang susah Skali di daerah kami,,,
Bom dia parabens muito bom excelente
Mene ak channel bnaya hai jis par me electronic rileted videos datla hu aagar aap ko electronic me interest hai to mere channel par ak bar Jana jrur.
Mere channel ka name. Mr Yogeshk
Amazon needs this cart for fast delivery 😬😎⚡
nice man! no you have a nice day!
Mene ak channel bnaya hai jis par me electronic rileted videos datla hu aagar aap ko electronic me interest hai to mere channel par ak bar Jana jrur.
Mere channel ka name. Mr Yogeshk
Apart from unfinished metalwork, burr and rough edge removal, I would think the bumpsteer on that contraption might break your arms, before it breaks something else like the very weak pivot point at the articulation, just love the way it flexes under the weight of the builder, rather you than I mate.
Hello friends happy amazing 👍
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna.
Mere channel ka nam. Mr yogeshk
Disref karne ke liye sorry par ak bar Jana jrur
Bel video, bel lavor, bel mezzo! bravo.
@21:58 Kenh doing the Chinese delivery man bit!! 🤣 He made more money last month than I have in my whole life! And I'm 60 in the USA! 😭 🤪
любопытно - откуда у автора всегда столько всякого хлама? для такого творчества.
I like all your work
It fantastic bikes dude 👍👍👍👍👍
Very creative and useful bike
Upload many videos like that.👍👍
Thanks for this great video. Can share the part number of the drive wheel and where it can be bought. Thanks.
Good job mister well done
Yes ATV please ..😁😁
Amazing project ❤✌
Can you build a recumbent trike like "AAZZAA free Trike Project" ?
You have the means and the skills to build a nice one.
Awsome bro... ♥️i need one. India
I needed bisinus purpes(strretfudd)solar charging and ligts.. Hou many indian mony ❓️pls rply
If I need to order one like that to my country will it be possible to get it
That right there is very good design
Do you ever make these for other people who can't do it themselves?
Excellent work. How the two motors with their individual controllers remain in sync while driving straight. And how the motor differential speed is achieved on curves?
It is possible to link 2 speed controllers together. I think this is done either with CAN bus/UART. You can also get a dual VESC controller.
I`m so jealous of his pipe bending machine. At 7.30 he`s welding aluminum to steel ? ? can that be done so easily ? ?
Nice work very very nice 👍
I would have spread the rear wheels apart more, make it wider, with that configuration, you will have to drive slow on curves, turns and bends or risk flipping the whole thing and go tumbling away like Jeremy Clarkson in his robin reliant. (look it up its good fun)
Also you could have placed the pivot of the steering right up to the cargo box, you have plenty of space to turn the wheel afterwards.
As always i enjoy seeing your build process and the end result. Cheers.
Reverse trikes handle like cars, the front wheel on the outside of turn prevents role overs. The Robin Reliant has nothing on the front to counter the weight shifting to the side. Also, how fast do you think he plans to go around turns?
Браво мастер я тоже хочу так сделать но у нас дорого стоит таких запчастей
dear sir , you are grate
Fantastic build!
Very nice sir
nice work man 😍
I'm wondering how long the middle headset will last with all that weight from the back end.
what tools is that you use as puncher before you drill?
Hi did you use all steel for the bike?
I like this cargo trike
First viewer 💗💗
ruclips.net/video/r2BdGjzHYY0/видео.html
Mene ak channel bnaya hai jis par me electronic rileted videos datla hu aagar aap ko electronic me interest hai to mere channel par ak bar Jana jrur.
Mere channel ka name. Mr Yogeshk
interesting, the motor is in the wheels? what do you call these so i can order some!
Is this allowed on the streets? Does it need a license or does it count as bicycle?
Pretty cool. Maybe put a horn on it
Please bro! make a corn harvesting machine and a seed planter
El mejor canal para crear cosas excelente video pero me gustaria hicieras un video de un auto super deportivo electrico
I have a question? What type name of the metal that tube like? And and can I use it for my scooter motorcycle as cargo? Thanks and im a subscriber from philippines always watching your vid
Muito eficaz e além de uma utilidade imensa...o carrinho ficou lindo demais...AMEI.
Mantap keren ikuti terus sampai habis
Pa shoutout idol form philippines 🇵🇭
Mene ak channel bnaya hai jis par me electronic rileted videos datla hu aagar aap ko electronic me interest hai to mere channel par ak bar Jana jrur.
Mere channel ka name. Mr Yogeshk
Good👍👍
40ah battery and reverse gear... this is good!
Enjoy pandago 🥳🥳🥳🥳
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna.
Mere channel ka nam. Mr yogeshk
Disref karne ke liye sorry par ak bar Jana jrur
I'm afraid of the strain on the steering swivel joint since the front has no suspension.
Yes agreed.
Удобная вещь, но только не для наших дач))
Bel progetto, lavoro molto bello.
🛠️🔩🔧👍👍👍👍🖐️
Amazing recycling
What are the measurements of the steel profiles you use?
Awesome Work!
U R The Best Mr❤️
Hi, cool build. Would be amazing if you could add parts links! Thanks for the share.
Меня всегда забавляло как этот чел выбирает из сотни одинаковых новых запчастей, лежит у него несколько десятков покрышек совершенно одинаковых, видно что новых, а он все равно умудряется выбирать между ними как будто они чем то отличаются
Акумлаторни кандай ремонд килса болади