@stephennyberg2292 same here man, I was on a bad road and nearly bit it a few times, by the time I turned 21, I just said f*ck that sh*t and got my degree in physics.
As soon as I heard the accents & saw the beers, Bob & Doug Mckenzie came to mind.. Now I'll always think of you guys as The Strange Brew Crew! "Take Off, Eh?! You Hosers." 🤣 Awesome job! That was a great little conversion, and looked like a blast to ride! 😊🤘 Sam -
Carb icing happen when there's moisture in the air, and the throttle plate be part closed, there's pressure drop like bang ya know. Ref blows whistle, then game stops then starts again. Just direct some heat back to the carb from cooling-air or somewhere near exhaust
That was fun! I would like to see more info about how you built this. Here in SW Idaho we only get about a foot (oops! 300mm) of snow on the ground generally but I was thinking this would be a good conversion for a scooter to run around the park in the snow! I see you guys haven’t posted a video in a while, hope one of your inventions didn’t kill you or something…
be cool if you guys did a collab with Grind hard plumbing ! been watching those guys since they were a small page, nice to see other content similar ! nice video!
There’s one of these same things coming on the market soon called moonbikes I’m pretty sure. French brand but ya looks the same but electric motor and way less ballsy then this piece of work. God bless Canada 🇨🇦
At 2:17 you can see the hinges holding the track together. My best guess is that it's a snowmobile track that's had the edges cut off and has been shortened
@@andremartinbike I'm all about the 3 wheeler life. I watch all of your vids on them too lol. I actually just converted my 83 200e to 12" wheels by getting 400ex hubs to change the bolt pattern to 4/110
Allo cest super genial ton invention est ce que tu pense que ta technique de faire tourner la track avec les pneus pourrait marcher pour un ski doo artisanal avec une track plus longue moi j’ai peur que les pneus tournent dans le beurre sans faire tourner la track.
Nice project, more fun to build then to ride though, I built an electric version of this 10 years ago, Its awful dont do it, front steering is thrown all over the place by ruts and bumps. Later i built a tricycle with 2 wheels in the front, much better. I had trouble with my track coming off all the time though, uses lots of battery, could only go a few miles. Gas probably a better choice.
And ah, other than that it's a , mini bike with a track and ski attached to it and ah, other than that its ah , pretty cool little gizmo........other than that! LOL
Are you still replying to comments? If you are where did you get the tracks from and what size are they? I have a Coleman CT200u and I’m wondering how I can do this.
This is what most Americans are missing in there life. Cold beer, a fire, good friends and fun 🇺🇸🇺🇸🇺🇸
Good job guys!
Thanks man, appreciate that!
Can't speak for other Americans but I myself have all that except I'm not interested in the booze.
U guys still drink bud light?
@stephennyberg2292 same here man, I was on a bad road and nearly bit it a few times, by the time I turned 21, I just said f*ck that sh*t and got my degree in physics.
No but we have plenty of guns so that makes up for it.
As soon as I heard the accents & saw the beers, Bob & Doug Mckenzie came to mind..
Now I'll always think of you guys as The Strange Brew Crew! "Take Off, Eh?! You Hosers." 🤣
Awesome job! That was a great little conversion, and looked like a blast to ride!
😊🤘
Sam -
That's awesome! 😂 Thank you! 🤘
@@andremartinbike Most welcome bro! And thanks for sharing! 👍
Very cool! Great job, looks like a blast. I've got a minibike with a 6.5 hp engine, this would be a perfect upgrade.
Thank you sir!
What a nice place to live and hang out! Great bike as well!
Thanks man! It's my little paradise 😁
Carb icing happen when there's moisture in the air, and the throttle plate be part closed, there's pressure drop like bang ya know. Ref blows whistle, then game stops then starts again.
Just direct some heat back to the carb from cooling-air or somewhere near exhaust
This video makes me feel proud to be canadian. Awesome build man!
That sir is the best comment on this video! Thank you!! 🤘🤘
I really want to build one of these. Maybe a" how its built"video. Id buy plans or direction if theyre available
Ingenuity brother!!
Really cool! The gathering is about as cool as the idea.
That would be a fun way to access some of the State Park Cabins where I'm at. I love it!
“Hold my beer and watch this” every famous mans last words
Haha stumbled onto this video, loved it from hold my beer to the dude rolling a smoke in the background lol
Haha awesome 🤘
is it really a smoke ;)
What a beautiful place.
Pretty cool, just need to mount a snow flap on rear. Love it
P.A engine, plaid jackets. Damn you make me proud to be Canadian!
Gotta lose the 80's sunglasses. LOL. Cool vid brothers!!
Frenchmen have always been at the leading edge of Canadian power sports for innovation and level of competitiveness
Love this comment!! 🤘
I love the fact that you used a Doodlebug Db30s. I love these bikes.
Hell ya french boys just like me 😂😂
Coolest thing ever. Working on something like this for my ct200u ex but I need more fabrication practice to get that frame for the 3rd wheel set
Wow is that cool!! so awesome my friend. I am looking to see if you show how you made this beast. very cool.
Simple design, nice job!
You have a lot of nice little things. I dig.
All smiles all fun good job kids... keep your powder dry and full speed ahead.
Thanks for the positive vibes 🤘
thing is badass. looks like a blast.....well...when the throttle is stuck wide open, lol
That was fun!
I would like to see more info about how you built this.
Here in SW Idaho we only get about a foot (oops! 300mm) of snow on the ground generally but I was thinking this would be a good conversion for a scooter to run around the park in the snow!
I see you guys haven’t posted a video in a while, hope one of your inventions didn’t kill you or something…
Seems to work quite well👍
Super votre truc!!! Je vais essayez de faire comme ça!!! Une criss de bonne idée!!
Cool build.
Nice bike. Stay safe and stay warm
Excellent job guys that's cool
Nicely Done guys!!
Yessss! I want to make 1!!
Man it feels good to be Canadian lol!!! EH!!!!!
Nice video that thing is sick i remember him building it back when he was my neighbour 😎
Yessir! That's awesome!
beer in hand , bad ass tracked mini bike. i subbed 😂💯
Thanks man! More coming soon 🤘
Hold my beer lol fun video and nice job on the machine! looks like you guy’s know how to have a great time!
Thank you sir! We try 😁
Maudit beau projet mon Danny!😂
Need more bite on the front maybe slightly bigger front ski?. Pretty sweet though.
What was the specific track from Polaris used in this build? I'm trying to build one of these on my own.
What a cool contraption
Could you guys make a short video of the tension adjuster on the back wheel? That would sure help me out!
"HOLD MY BEER!" 😂😂😂
this is sick. tell your bud he doesn't give himself enough credit.
be cool if you guys did a collab with Grind hard plumbing ! been watching those guys since they were a small page, nice to see other content similar ! nice video!
Yessir I love there video's, thanks for the comment! 👌
I did the same but fully electric haha awesome :D
The front ski needs a Skag so it won't slide sideways, just like the skis on snowmobiles and snow bikes.
We are actually uploading a new video soon with a redesigned front ski new gearing and a few other things.
Awesome, looking forward to it 👍🏻
Glad someone thought about the ski modes for some tracking ability. Draging your feet constantly seemed pretty dumb.
you need to hook a torque converter up to that engine to have that deep snow power!
That and you need front shocks for the bike. It’ll take bumps a bit better, I think two ski’s instead of just one would be better
There’s one of these same things coming on the market soon called moonbikes I’m pretty sure. French brand but ya looks the same but electric motor and way less ballsy then this piece of work. God bless Canada 🇨🇦
Love it , too cool 😊
Thats pretty cool man
This looks awesome! What was used for the track?
At 2:17 you can see the hinges holding the track together. My best guess is that it's a snowmobile track that's had the edges cut off and has been shortened
nice work! i'd say a bigger ski in the front!
2 skis so you can keep your feet up
Can you provide a link to where you purchased the track??
That's super cool!!
Awesome bud
Maybe I’m just dumb… but how does the track stay on the tires and not just slip when you give throttle?
Aweille les boys cest mas mal sick!
i like the video! good work guys)
Will it brake trail , go on powder ?
tabarnac! des francos ontariens certain ca! nice
Have you all tried a wider front ski?
Dudes tinkering with beers 🍻!! That’s where all the best ideas 💡 come from!! Laughed my arss ooff
Hahah awesome 👌
Vraiment tres tres cool. Le frame est tu scratch built ou c'est un .. un ... kek chose?
Cest un kek chose, pas sur de quoi lol
Jy airrais calisser une tape a son osti de micro😆😆 hold my beer!!!
Vraiment cool
Hey this thing is awesome! What kind of mini bike did you use for your build and what size was the original motor
Those are doodlebug db30's. They usually have 80cc motors in them from the factory.
Will it pull an ice shack? Thinking about trying something like this woth a moped I have sitting around.
Not a chance lol
@André Martin pretty cool anyway. Nice work!
Wider ski is needed. Other than that..AWESOME. 🏪🏦🏥⛪🏨💈🚗🚕🚐🚛🚚
Yessirr we are working on a second video as we speak, new and better ski with lower gearing and a few other things! Thanks!! 🤘
nice job, now extend the forks. choppers are cool. needs cup holder.
And ape hangers.
Looks fun! Should make a couple and race them lol
Yessirr, we're a bunch with 3 wheelers we race those lol
@@andremartinbike I'm all about the 3 wheeler life. I watch all of your vids on them too lol. I actually just converted my 83 200e to 12" wheels by getting 400ex hubs to change the bolt pattern to 4/110
That's awesome X2! Haha
Love the atc's! you should make some tracks/ ski for those too.
I did! Check my other videos.
This is really cool😃
Hands down best channel on YT
Can you explain the track mods?
Im interested too. Especially the tensioner
cool bike
Old 1970 pak trak pretty cool remake
guys u seemss cool nice guys :) i love the video keep up the great work :)
Allo cest super genial ton invention est ce que tu pense que ta technique de faire tourner la track avec les pneus pourrait marcher pour un ski doo artisanal avec une track plus longue moi j’ai peur que les pneus tournent dans le beurre sans faire tourner la track.
Is that a three wheeler?
Im intersted in how well it does is fresh snow? Does it do good in deepish snow? You try it off the groomed road?
Deeper then 20cm of fresh snow it will struggle. It is geared way to high, might get a smaller sprocket for next year.
With a torque converter it would be awesome.
Where can I get the kit
Can you tell us what track you used?
He says in the video, from a polaris snowmobile and he cut it to the size he needed.
I want one with a 13hp and 40 series belt clutch haha
That's awesome! But will a 200e motor fit?
With a welder and a grinder anything is possible haha
@@andremartinbike that's a build I would love to see and so would all the guys in the Facebook groups 👍👍✌️
I would like to know exactly what the track is. Working on a similar build
He sais it in the video, a track off some polaris sled that he cut up to make it fit.
I bet it’s from one of those little Polaris 120s.
Nice project, more fun to build then to ride though, I built an electric version of this 10 years ago, Its awful dont do it, front steering is thrown all over the place by ruts and bumps. Later i built a tricycle with 2 wheels in the front, much better. I had trouble with my track coming off all the time though, uses lots of battery, could only go a few miles. Gas probably a better choice.
We are working on a second video, new ski new gearing, testing it soon, should be a lot better!
Bud light?
Would cvt work?
How well do you think it would perform in mud?
Probably good as long as there not to much water.
how did you get the track so small? i thought that they were usually a lot longer
He said he trimmed it down.
@@nybergsgarage oh :o i didn't hear that :)
Awesome idea. Roughly how much the build cost
Very little, most was found or donated.
And ah, other than that it's a , mini bike with a track and ski attached to it and ah, other than that its ah , pretty cool little gizmo........other than that! LOL
Hahah we had a good laugh about that ourselves!
Only thing missing is skis for your boots. Lol.
i would totally buy it if i could
Are you still replying to comments? If you are where did you get the tracks from and what size are they? I have a Coleman CT200u and I’m wondering how I can do this.
He explains that in the video, its from a polaris snowmobile.
@@andremartinbike Thanks
"hold my beer... Watch this" -That usually ends horribly. So glad they demonstrator came out okay
nice
"had time to fabricate it on my lunches .... where i used to whork" lol Fuckin EH
I want to live where it snows this much
It's very fun!
No you don t.
tredwell trail partner 2020 version
Nice!