Hello sir please tell me internet connection in router come by modem are any SIM plug in router , are not any section for using SIM directly in router for internet connection ? Please tell me in detail, I'm little bit confused
do your router support mesh for TP-Link 605x extender wifi 5G? because lot of router doesn't support only show 2.4G than configure appearance on extender wifi 2.4G and 5G but it doesn't seem extender direct connect to router 5G instead of 2.4Ghz only
that depends if your ISP has enabled mac binding on your system . Normally in alliance you need to call the alliance customer care and provide your routers mac id and tell them to add this mac id against your customer ID.
Hey so I did the same thing but my connection automatically drops and I think I made some mistake while setting up the router because when I go to the wifi settings from my phone it shows two different name’s one is the name that I put in and the other is TP-link_B3Bf and then my phone automatically disconnects with the router and tries to connect to the b3bf connection. I’m very confused please help
@@parthpuranik4117 yes..actually i have already created a view on that a few days ago..but unfortunately i was not in a position to upload new videos.. my mom passed away one week ago..as soon as i'm in a mentally stable position i'll upload that video.
it has a traffic monitor feature where you can check realtime data usage by no of devices connected ..it also comes with a graphical representation . and it has a device stat option where you can check the current CPU and memory stats.
Brother can u make a video on a onu and router connection but the onu should be of with wifi variant i do have a onu with wifi but i am confused whether i can use it as a modem or not
I brought the router but the wifi setup already says locked I think all that setup doesn't work at all Direct green light it got And I feel some one already used my wifi and returned?
Yup...this could be a returned item ...if the admin password already set . You can reset the router to get back to the factory settings.check for the reset pin on the back of the router .
Ha apnake broadband connection nite hbe. Ha eta diye upto 12 devices easily connect kore net share korte parben . But total speed ta divide hoye jabe device gulor r moddhe (not equally , je device r jokhon jamon requirements ) .
Hi we are 3 people working from home and smart fridge and smart tv and mobile and smart speakee whether i should go with this or c80 or c7 or any other router ex. Netgear nighhawk pls let me know asap
It depends on your operator..you need to call your customer care and ask for the same ..normally in ACT they provide PPPOE connection..also you can check your IPV4 settings in the network adapter section of windows OS.
C80. you'll get good speed but still you might not get full signal at the farthest corners.. in that case you can use a low cost router in a bridge mode along with c80
Thanks for providing the info. Btw iam having a fiber connection of 100mbps from Excitel. Iam confused between Archer A6 Ac1200, Ac1750 & C80 Ac1900. Can you suggest which will be best among the three i know the price differences but in terms if usability etc
it entirely depends on your particular use case. like are you looking to connect multiple devices (say more than 5 devices ) at the same time..or you are looking for high range ? are you staying in a single floored apartment or you are planning to use the router in big 2storied house.. also positioning of the router inside the house affects the signal . basically you need to narrow down your primary usecase ..range and the total number of concurrent devices . If you are looking for a basic gigabit router which provides full bandwidth of 100Mbps connection and planning to use in a normal 2BHK flat then Archer A6 is a decent choice..but if you are planning to use in a big house and many devices will be connected at the same time then A6 will not be enough. in such cases C80 AC1900 latest model is an excellent choice. But again in a multi floor setup a secondary router connected to a primary router would be the better approach.
probably you are right.. or probably you are not.. coz there's no way to check it now..coz i brought this issue to TP link dev team attention and they removed that QR code banner in the latest firmware ..anyway it's my bad i didn't try to close that banner and check ..i feel so dumb :D.
Hi SB, I have a 150 Mbps connection from Alliance Broadband, which tested perfectly (142-145mpbs) when the internet ethernet WAN cable was connected directly with my PC, bypassing the router. Now, when I connect the PC with this router, the speed drastically falls to 89-94 Mbps. I had called the TP-link CC thrice already, but they were no good. All the settings shared by Alliance is correct. How can I get my req connection speed? Please help !!
@@sohamchakrabarti1119 ok.. you should get full bandwidth in LAN .. probably some settings are altered.. currently I'm outside..I'll try to help you with a possible solution at evening.
@@sohamchakrabarti1119 hi from your router's LAN port to PC LAN port , are you using a CAT5E cable ? also check if the Qos is turned on..if it's on turn it off !
@@belimvasim143 well in that case you need to buy either jiofi 6 or airtel hotspot devices.. no other good hotspot devices are available in the market in the below 6k price range ...see you'll never get good latency in hotspot devices coz the connection is dynamic wireless setup . You may switch to jio and get something like this fkrt.it/8V0lMbuuuN to see if you are getting good stability .
@@SneaX646 you'll find it under 5Ghz wireless settings. There's an option to enable to disable multi user MIMO but you must have MIMO supported devices in order to use it.
I'm using the same model. I realized that I had it on dynamic Ip when I switched it to static I was able to configure. I didn't realize the difference since its my first time setting up a router. Thanks for the great video!!@@SmartBengali
@@SmartBengali thank you bhai...i am able to connect my laptop via router but phone connect hoche na...kono setting aahe for alliance er connection er jonno keno alliance does give user name and password to login with static ip
@@surajprakashmaji7307 phone e ki error show korche ? in general apnake ISP r login portal e login korte hobe internet use korte gele ..apni customer care e call kore autologin on koria nite paren sekhtre alliance r site e r login korte hobe na net use korar age.
archer a6 v3 and c6 v3 are exact same model ..only the model name is different due to different sales channel.. it's a decent router and handles multiple devices without any issues...only downside is the low range.
Well it's difficult to tell cause it depends on various factors like positioning , no of walls , interference..but I have used C6 and A6 V2 ..I have seen that A6 v3 has lesser range than C6.
@@SmartBengali ok did u faced any issue in A6 V2 like u need to restart sometimes in a week ,and need to hard reset for 30 second once a month to make all indicator lights blink properly and make WiFi work?
Depends on the number of walls between your device and your router ..you won't get signal in 5ghz from that distance.. but you'll get 2.4 ghz signal .I have made a detailed review about this tp link Archer A6 on my channel where u have done live speedtest from different distances..you may check that video .
@@SmartBengaliMERCUSYS AC1900 Wireless Dual Band Gigabit Router may I try this for better speed and signal strength?is it a trusted brand, if possible make a review on it.
Ami notun archer a6 v3 kinechi amar broadband wishnet kintu setup korar por wishnet e user name ar password dite gele dekhache invalid user mac er kono solution ache??
Apnar old router r mac address bind kora ache wishnet isp r geche...apni wishnet cc te call kore new router r mac address ta bind korte bolun ba bolun mac address binding tule dite taholei hbe..eta ekta security feature isp gulor jate apnar internet onno keu na use kore.
@@atanusarkar185 mac address onek vabe paoa jete pare .. easiest way router r back side r sticker e mac address bole lekha ache dekhben ekta hexadecimal no Echara apni cmd te ipconfig/ all type kore enter marun sekhane mac address show korbe router r . Echara routerer firmware settings thekeo paben mac address Echara getmac etc onek commands ache specially linux e .mac address Paoar
run ping command on the server ip .and check which one gives you less time.. this is the easiest way,there are many other ways but the basic idea is the same.
if you are already provided with the IP address earlier you may check the IPV4 settings on your computer . alternatively you may login to your ISP account portal to find it.
@@SmartBengali sir, I have my static ip. My static ip is assinged with my ONU. I recently reset my tp link router. So when I configure my router it shows different type of ip. I want to know that,, can I use the same ip which was used in ONU??? Will the static IP used in ONU and in my TP link router be the same?
everytime i try to log in it says "hold the reset button for 10 sec" and i dont know what that is plus i have tried every button and i cant log in so annoying..........
inside the firmware ..go to the advanced mode ..then go to wireless under wireless go to wireless settings ..then switch to 5Ghz tab ..at the bottom you'll see a checkbox "Enable MultiUser MIMO" .
probably you are right.. or probably you are not.. coz there's no way to check it now..coz i brought this issue to TP link dev team's attention and they removed that QR code banner in the latest firmware ..anyway it's my bad i didn't try to close that banner and check ..i feel so dumb :D.
you can turn off the auto connect option from the recipient device settings .Also you can control which devices can be connected from access control of routers firmware settings.
I followed every step. Its showing Congratulations you can enjoy internet now. Its showing connected also in app/website. But I'm not getting any Internet connectivity in Mobile/Laptop after connecting to Wifi. 🥺
probably you are right.. or probably you are not.. coz there's no way to check it now..coz i brought this issue to TP link dev team attention and they removed that QR code banner in the latest firmware ..anyway it's my bad i didn't try to close that banner and check ..i feel so dumb :D.
normally the default username password for any router is admin and admin..some companies uses administrator and administrator ..but these days they let you choose to set your username during first setup..in that case the username and password would be the username and pass you've set during first use.
Kindly response !!. Can I use this router as repeater mode ?? Dose it have WDS option in its firmware ??
yes you can use it as repeater
@@SmartBengali thanks for your response. I mean wireless through WDS?? ( not AP)
@@nayonmazumder2106 yes i understood your question ..and it does support WDS bridging .You'll find it under system tools ->system parameters .
Is there have Wds bridge support?
yes... you'll find it under system tools.
@@SmartBengali yes you're right 👍
Hello sir please tell me internet connection in router come by modem are any SIM plug in router , are not any section for using SIM directly in router for internet connection ?
Please tell me in detail, I'm little bit confused
Neat and clean video....very professional! Liked it...👍
For Jio Fiber connection, should I choose Dynamic IP while setting up the TP Link router?
nomally jio provides their own router. do you want to use an external router as extender ?
do your router support mesh for TP-Link 605x extender wifi 5G? because lot of router doesn't support only show 2.4G than configure appearance on extender wifi 2.4G and 5G but it doesn't seem extender direct connect to router 5G instead of 2.4Ghz only
You are a life saver. A big thank you 💖
Thanks ..if possible plz subscribe to my channel :)
Hello, I am using alliance connection , do i need to clone the mac address or I have to put it
that depends if your ISP has enabled mac binding on your system . Normally in alliance you need to call the alliance customer care and provide your routers mac id and tell them to add this mac id against your customer ID.
Hey so I did the same thing but my connection automatically drops and I think I made some mistake while setting up the router because when I go to the wifi settings from my phone it shows two different name’s one is the name that I put in and the other is TP-link_B3Bf and then my phone automatically disconnects with the router and tries to connect to the b3bf connection. I’m very confused please help
Reset the router and reconfigure.
You find the resetting option in the firmware configuration page .
@@SmartBengali where is the firmware configuration page? Can u make a video on that?
If possible pls tell
@@parthpuranik4117 yes..actually i have already created a view on that a few days ago..but unfortunately i was not in a position to upload new videos.. my mom passed away one week ago..as soon as i'm in a mentally stable position i'll upload that video.
@@SmartBengali please take care family comes first always, may god give you the energy to overcome this difficult period, thank you
did you have any option like wireless statistic?
it has a traffic monitor feature where you can check realtime data usage by no of devices connected ..it also comes with a graphical representation . and it has a device stat option where you can check the current CPU and memory stats.
Brother can u make a video on a onu and router connection but the onu should be of with wifi variant i do have a onu with wifi but i am confused whether i can use it as a modem or not
use your wifi enabled ONT as primary router/modem and your router as a secondary wifi ranger extender.
I brought the router but the wifi setup already says locked
I think all that setup doesn't work at all
Direct green light it got
And I feel some one already used my wifi and returned?
Yup...this could be a returned item ...if the admin password already set . You can reset the router to get back to the factory settings.check for the reset pin on the back of the router .
Hello. Etar jonne ki broadband connection nite hobe? Eta diye ki multiple devices connect kora jabe
Ha apnake broadband connection nite hbe.
Ha eta diye upto 12 devices easily connect kore net share korte parben . But total speed ta divide hoye jabe device gulor r moddhe (not equally , je device r jokhon jamon requirements ) .
Hi we are 3 people working from home and smart fridge and smart tv and mobile and smart speakee whether i should go with this or c80 or c7 or any other router ex. Netgear nighhawk pls let me know asap
you didn't mention about the range you are looking for also plz mention the budget
Max 10k
Range 2000sqft house
@@adithyasuresh4589 and your internet bandwidth is ?
I don't know bhaiya it is act fibernet
Hi, I have an ACT Fibernet connection... How do I find out what type of connection I should choose ? Like, Static IP, dynamic IP...?
It depends on your operator..you need to call your customer care and ask for the same ..normally in ACT they provide PPPOE connection..also you can check your IPV4 settings in the network adapter section of windows OS.
@@SmartBengali oh okay ! But what will happen if I select dynamic IP ? Because I actually did that and set it up 🙈
@@skandankashyap5714 then a new unique IP will be selected from a IP pool at each login.
@@SmartBengali oh okay ! So it won't be a problem if I select dynamic IP even if they may provide PPPoE right ?
@I killed that beard guy it's working fine. There isn't any problem at all. I had selected dynamic IP
Thank you very much
which is the best isp in kolkata can you please give a video for this
It entirely depends on area and your local operators last mile infrastructure. Same ISP's provide different kind of services in different areas.
Bhaiya I have 250 mbps plan 2000sqft c7 or c80 from tplink is best?
C80. you'll get good speed but still you might not get full signal at the farthest corners.. in that case you can use a low cost router in a bridge mode along with c80
Thanks for providing the info. Btw iam having a fiber connection of 100mbps from Excitel. Iam confused between Archer A6 Ac1200, Ac1750 & C80 Ac1900. Can you suggest which will be best among the three i know the price differences but in terms if usability etc
it entirely depends on your particular use case. like are you looking to connect multiple devices (say more than 5 devices ) at the same time..or you are looking for high range ? are you staying in a single floored apartment or you are planning to use the router in big 2storied house.. also positioning of the router inside the house affects the signal . basically you need to narrow down your primary usecase ..range and the total number of concurrent devices . If you are looking for a basic gigabit router which provides full bandwidth of 100Mbps connection and planning to use in a normal 2BHK flat then Archer A6 is a decent choice..but if you are planning to use in a big house and many devices will be connected at the same time then A6 will not be enough. in such cases C80 AC1900 latest model is an excellent choice. But again in a multi floor setup a secondary router connected to a primary router would be the better approach.
@@SmartBengali is the connection stable in A6? Have you tried a little gaming over it?
i did try CS Go though i left gaming these days ..and the connection was stable didn't face any drops .
I went ahead with C80 1900 its providing very stable connection and its good for gaming aswell
@@DarkKnight-qh1ih nice ..good choice ..i didn't get any chance to use the latest c80 but I had used the old C80 ..it was excellent .
You have to tap on the cross button bottom where there is a QR ...then it will be available save button
probably you are right.. or probably you are not.. coz there's no way to check it now..coz i brought this issue to TP link dev team attention and they removed that QR code banner in the latest firmware ..anyway it's my bad i didn't try to close that banner and check ..i feel so dumb :D.
Hi SB, I have a 150 Mbps connection from Alliance Broadband, which tested perfectly (142-145mpbs) when the internet ethernet WAN cable was connected directly with my PC, bypassing the router. Now, when I connect the PC with this router, the speed drastically falls to 89-94 Mbps. I had called the TP-link CC thrice already, but they were no good. All the settings shared by Alliance is correct. How can I get my req connection speed? Please help !!
Are you getting that 89-94 Mbps on 2.4Ghz ? Also is this VIA router LAN ?
@@SmartBengali I am getting that via LAN
@@sohamchakrabarti1119 ok.. you should get full bandwidth in LAN .. probably some settings are altered.. currently I'm outside..I'll try to help you with a possible solution at evening.
@@SmartBengali Thanks SB !!!!
@@sohamchakrabarti1119 hi from your router's LAN port to PC LAN port , are you using a CAT5E cable ? also check if the Qos is turned on..if it's on turn it off !
what channel width available in 2.4ghz and 5ghz in advance wifi settings
please let me know
Bro i need a hotspot device for gaming like jiofi please recommend me best one
sim supported or broadband feed ?
@@SmartBengali no broadband connection
Sim supported i have pretty good airtel connection in my area but latency problem
no consistent speed
@@belimvasim143 well in that case you need to buy either jiofi 6 or airtel hotspot devices..
no other good hotspot devices are available in the market in the below 6k price range ...see you'll never get good latency in hotspot devices coz the connection is dynamic wireless setup .
You may switch to jio and get something like this fkrt.it/8V0lMbuuuN
to see if you are getting good stability .
Why bandwidth control option is not available in this routers?
how to configure if I have fibre cable connection of airtel
should i go for the a6 or c6
For stability go for A6
for better range go for C6
Which one becomes hot
@@SneaX646c6
@@SmartBengali i cant find mu mimo feature on a6....there is no mu mimo on a6 or not!
@@SneaX646 you'll find it under 5Ghz wireless settings.
There's an option to enable to disable multi user MIMO but you must have MIMO supported devices in order to use it.
My firmware settings are different from the ones in this vid, i cannot change IP or DNS settings, how can i fix that?
are you using the same model ? TP link has different firmwares for different modles
I'm using the same model. I realized that I had it on dynamic Ip when I switched it to static I was able to configure. I didn't realize the difference since its my first time setting up a router. Thanks for the great video!!@@SmartBengali
@@kristy-maxineakiro4938 glad to heart that :)
Can I fill the ip and dns and connection type from my old router pls reply
yes... if you are using the same connection , you can do that.
@@SmartBengali thx😁
Bhai..amar alliance er connection, then set up ta same hobe toh?
Setup process same , but IP gulo apnar operator je IP details debe segulo put korben .
@@SmartBengali thank you bhai...i am able to connect my laptop via router but phone connect hoche na...kono setting aahe for alliance er connection er jonno keno alliance does give user name and password to login with static ip
@@surajprakashmaji7307 phone e ki error show korche ? in general apnake ISP r login portal e login korte hobe internet use korte gele ..apni customer care e call kore autologin on koria nite paren sekhtre alliance r site e r login korte hobe na net use korar age.
@@SmartBengali thanks bhai for the help, really appreciate. 🙂
Can I Buy TP Link Archer C6 Not A6 ??? Is C6 Is Good For Smart TV ???
archer a6 v3 and c6 v3 are exact same model ..only the model name is different due to different sales channel.. it's a decent router and handles multiple devices without any issues...only downside is the low range.
Very nice video bud. Thank you.
you are welcome :)
Thanks mate, very helpful
What is the 5ghz channel variation?
How many channels are their?
9 20MHz non overlapping channels
In the Bangladesh region which time zone i selected?
UTC + 06:00 (Dhaka)
Thnx You So Much For This Video 🙏🤗
My configuration is completed....but still in the wifi section "no internet is written". What should i do now?
Does A6 V3 has less range than c6 or A6 V2?
Well it's difficult to tell cause it depends on various factors like positioning , no of walls , interference..but I have used C6 and A6 V2 ..I have seen that A6 v3 has lesser range than C6.
@@SmartBengali ok by how much percentage V3 has lesser range than c6,suppose if c6 covers 1200 square feet ,A6 V3 will cover 800 square feet?
@@piyushkumar-me1nb I didn't measure it quantitatively...it just a general observation.
@@SmartBengali ok did u faced any issue in A6 V2 like u need to restart sometimes in a week ,and need to hard reset for 30 second once a month to make all indicator lights blink properly and make WiFi work?
@@SmartBengali I am facing an issue in V2 like need to restart once every 48 hours as my router starts showing red light
Thank you
Tp link A6 or Tplink C6..which one is better?
Are you taking about V2 or V3 variant of both routers ?
V3
@@imsingh8085 both have same hardware in case of V3.
tplink AC1200 Archer A6 router will place from 70 ft away from my room is there any WiFi signal will available or not?
Depends on the number of walls between your device and your router ..you won't get signal in 5ghz from that distance.. but you'll get 2.4 ghz signal .I have made a detailed review about this tp link Archer A6 on my channel where u have done live speedtest from different distances..you may check that video .
@@SmartBengaliMERCUSYS AC1900 Wireless Dual Band Gigabit Router may I try this for better speed and signal strength?is it a trusted brand, if possible make a review on it.
@@sukdas688 actually mercusys is a subbrand of tplink. they make good routers at affordable rates..only issue is the after sales service .
The video is very helpful
Glad to hear that
can you please share the link of PPPoE setup of this rourter?
i'm not using any PPPoE setup now but i'll could post a guide video for you after 2-3 days
For 300Mbps Plan Which Router Is Best??
Bruh, can we connect a telephone with this router???if not is der anyother way??
Firmware update korle ki Data sob ure jay?mane Abar reset Korte hoy?
Your settings configuration will be intact if you update via online channel.
Dada no bugs😀😀 close billow window show save option
Ami notun archer a6 v3 kinechi amar broadband wishnet kintu setup korar por wishnet e user name ar password dite gele dekhache invalid user mac er kono solution ache??
Amar fiber optic with modem
Apnar old router r mac address bind kora ache wishnet isp r geche...apni wishnet cc te call kore new router r mac address ta bind korte bolun ba bolun mac address binding tule dite taholei hbe..eta ekta security feature isp gulor jate apnar internet onno keu na use kore.
@@SmartBengali mac address ta kothae pabo router er pechone je address ta ache
@@atanusarkar185 mac address onek vabe paoa jete pare .. easiest way router r back side r sticker e mac address bole lekha ache dekhben ekta hexadecimal no
Echara apni cmd te ipconfig/ all type kore enter marun sekhane mac address show korbe router r .
Echara routerer firmware settings thekeo paben mac address
Echara getmac etc onek commands ache specially linux e .mac address Paoar
Bro how doi know fastest dns server for me?
run ping command on the server ip .and check which one gives you less time.. this is the easiest way,there are many other ways but the basic idea is the same.
do i need to remove plastic covering from antennas for better performance?
No..
How I know my static ip address without ISP. They ignored me to give my static ip
if you are already provided with the IP address earlier you may check the IPV4 settings on your computer .
alternatively you may login to your ISP account portal to find it.
@@SmartBengali sir, I have my static ip. My static ip is assinged with my ONU. I recently reset my tp link router. So when I configure my router it shows different type of ip. I want to know that,, can I use the same ip which was used in ONU??? Will the static IP used in ONU and in my TP link router be the same?
everytime i try to log in it says "hold the reset button for 10 sec" and i dont know what that is plus i have tried every button and i cant log in so annoying..........
try to flash the latest firmware once
Plz show how to do firmware upgrade on this router
I dont have the blue cable
It doesn't have to be of blue color ..just Any cat 5 or CAT 6 cable will do..use the cable provided with the router.
how do we enable Mu-Mimo in this router. I cant see any options in settings ?
inside the firmware ..go to the advanced mode ..then go to wireless under wireless go to wireless settings ..then switch to 5Ghz tab ..at the bottom you'll see a checkbox "Enable MultiUser MIMO" .
@@SmartBengali Thank you .. solved this mystery .. :)
The thing is my TP Link Router is upstairs connected to my Desktop and my dodo Modem is down stairs so I don't now
Do you want to patch them together ?
I think 5G also have save option at the end part of your video. You need to close the “x” mark at the screen which is showing the QR code for app.
probably you are right.. or probably you are not.. coz there's no way to check it now..coz i brought this issue to TP link dev team's attention and they removed that QR code banner in the latest firmware ..anyway it's my bad i didn't try to close that banner and check ..i feel so dumb :D.
Is Ethernet Is Comming In This Box??
if you mean ethernet patch cable ? yes this router comes with a small ethernet cable..you can check out the unboxing of this router on my channel.
@@SmartBengali Thnx Can I Buy TP Link Archer C6 Not A6??
Hi,
Can you please share a sample username & password for the router login.. Am facing it difficult to set it
ok
sample pass -netAdmin123
can you can put any username
@@SmartBengali thanks a lot for your prompt response.. Will try it & let you know
@@SmartBengali thanks a lot. The password worked.. 👍👍
@@subhabratapal8995 welcome :)
How to stop automatically connect other devices
you can turn off the auto connect option from the recipient device settings .Also you can control which devices can be connected from access control of routers firmware settings.
Valo..
I followed every step. Its showing Congratulations you can enjoy internet now. Its showing connected also in app/website. But I'm not getting any Internet connectivity in Mobile/Laptop after connecting to Wifi. 🥺
Did you login in your isp's portal ?
Bro for saving 5g close the add u can save as same as 2.5g 🤣🤣🤣🤣
probably you are right.. or probably you are not.. coz there's no way to check it now..coz i brought this issue to TP link dev team attention and they removed that QR code banner in the latest firmware ..anyway it's my bad i didn't try to close that banner and check ..i feel so dumb :D.
I just reset my router out of curiousity my computer isn't connecting
You need to put the IP's again .
What îs The username and password in 192.168.1.1?
normally the default username password for any router is admin and admin..some companies uses administrator and administrator ..but these days they let you choose to set your username during first setup..in that case the username and password would be the username and pass you've set during first use.
C6 vs A6
Hello
Hi there
Please tell in bengali
Difference between A6 and C6?
no difference in terms of hardware ..just two different sales channel.
A= amazon only version
C= retail version .
@@SmartBengali but there is a price difference too of about 500....C6 is costlier than A6
@@doc7782 offcourse the retail version will be more costlier ..there is store maintenance and overhead cost in offline retail stores.
Nic kirwa nie działa zdupcaj
Smart Bengali nahi smart indian