Immobilizer for E Scooter | How to install tutorial
HTML-код
- Опубликовано: 23 фев 2020
- You know how people say Ill never let my scooter leave my sight? Well, now you can have a peace of mind when you have to do a quick stop at a convenience store.
Comes with an anti-theft Immobilizing feature, motion detection alarm and super loud horn. Controlled by a remote that can activate or deactivate the immobilizer.
Suitable for all models of e-scooters including the Inokim and ZERO scooters. We also supply the wire harness for those with ZERO Scooters. And if your scooter has not enough space such as in the ZERO 8 or ZERO 9, we do have a de-shelled version of the immobilizer which can be used.
For more information on the e-scooter featured, please visit www.falconpev.com.sg/products... 
Авто/Мото
With the new scooter restrictions you have new ideas to keep Falcon pev in business,,good thinking
Scoot Man62 we provide a full suite of solutions not just scooters.
thanks so much for this video. I'm korean and there is no video how to install this in Korean youtube. I was looking for this for 2days !! thanks so much.
thank you for watching!
I have one on my wolf Warrior, it was direct plug and play.....love this system because there is no key switch this alarm is a must.
Thanks for the wonderful feedback!
I want one for my Wolf Warrior X Pro and u just confirmed it works for a Wolf Warrior X Pro ty man making my job easier
Nice little addition.
It is actually a much needed addition especially when you are not able to bring in the device and would like to leave it out for a quick one!
Same device also turn on the power on the e-scooter??
Hi do you have a step by step video for installing on a Inokim OXO or instructions included with the purchase?
Doing some voltage measurements on a very similar item.
Once the movement alarm goes off, it actually enables power to TURN ON the scooter! D:
Might be a short somewhere on the board, so im interrested to hear what other people experience with these.
Just installed this device, and yes, when the alarm is triggered it turns power on to the scooter, volt display and the ability to turn on the display. Super weird, and first thought I connect it wrong, but that’s not the case.
Nice vid
Hi, thanks for the vid. Does it offer a motor lock function to stop the rear or motorised wheel from being turned when activated or does it only have the disable electronics and alarm feature.
could you do a presentation with inokim oxo too please? cheers
Hi best regards, could this accessory be used on a dualtron eagle? How would the installation be? Do you have any instructions for this? Thank you very much.
Is it correct that the white wire is the 5V coming from the controller? If so, that means the alarm is working on a 5V input, instead of the "36V" the alarm is made for. Is that right?
Can you do this with M365 Pro?
Is this the same to connect key ignition?
Hi, Thanks. Can you do same video on Inokim OX or wrote how to connect the alarm in OX - which wire connect to other wire?
Do you have any answer?
Could you tell me the 3 wires? For ebikes the orange wire goes to the control (blue wire)? Blue is control for mine.
Need help, how to change battery in remote?
Nice.
mm.. i wich this alarm on my Vsett 10+. Because it already have immobiliser with NFC card, need only alarm mode.. and would be nice to have upgraded horn sound.. any plans for it? :)
Could this be installed on the Inokim Quick 4?
The white wire it connected to the red wire of the controller? Meaning white wire ithe the battery voltage?
How can i install it on my ebike engwe ep 2?
I have the same key.. Can someone please tell me how to connect the second spare key fob to scooter? The first one is old and worn. How do I connect the second? Anyone? Thank-you.
How can I open this remote to replace battery?
Works with 24 volt system?
When I click Un-Arm button, the alarm goes on again after some time, how can I turn off the alarm for long time?
Will this immobilizer work in a Varla scooter? what about the key switch with the volt-meter?
Not sure
The sound can be adjust to higher??
Thanks for the video. I have a joyor e-scooter. Would it be the same connection with joy or scooter?
We need a picture of the joyor connection
Did you manage to connect it? I got my Joyor GS7 today and trying to figure out how to do this
Yes please do GPS Tracker too!
scarlet ruby good idea
Yes please
Is the white the 5v line?
Full video need
Is this fit for mober s10?
Its compatible on ninebot gmax 30?
Can this be installed, together with the key ignition with voltmeter (Kugoo M4 Pro) and is it lock the weel too? Thnx
No wheel lock
Can I install this on the zero 10x ?
As in what happens to the key/ignition that is already present after installing this, will it still work the same or will this replace it as the scooters turn-on system?
A Viking yes sure you can install it on any scooter. On the ZERO 10X this will be the TOP layer security followed by the key switch as the secondary layer
@@FalconpevSg Double security, rather solid that tnx.
Is this the same for ebikes?
Can you change the alarm sensivity?
Yes
While I am driving if by accident the lock button with get press it will turn off!?!?
The scenario has a 0.0001% chance of happening.
when armed u can press unarm to move be able to ride the scooter u probably dont need to press the lightning bolt button
Can this be installed, together with the key ignition with voltmeter?
How do I connect the spare key fob? I have one exactly the same.. My first key fob is getting old but the new spare one doesn't seem to be connected to my scooter. How do I connect my spare key fob? Do you have any idea? Thanks
works the same on the Mantis Mini with the LT01 dashboard?!
Yes it should
Which kit do I need for the zero 10 x? I don't need installation as I'll do it myself but I don't know if I need a deshell kit or one of the others.
I cannot purchase till I find this information out
Please respond and let me know
Thank you
for zero 10x, just the normal kit is good.
@@FalconpevSg thank you bro
when i switch on my bike its speaking, how can i make it same as yourz
I have installed this Immobilizer Alarm on my Apollo Pro with keyed ignition following this video. However, I'm not sure where the green wire from the Immobilizer Alarm box is supposed to be connected to. The alarm only works when the key ignition is turned on. Any solutions would be greatly appreciated.
Hi! That normally happens when you the sequence of connection is wrong so ensure that your immobilizer is connected in series between the controller and key ignition wire:)
How does one ensure the Immobilizer Alarm is connected in series with the ignition? I don't know what wire from the throttle harness is the ignition. Your video doesn't explain this. Please explain.
@@mlastudioproductions sure would you email us at sales@falconpev.com.sg go a more detailed discussion
Hi I've got a wolf warrior can I buy one for my scooter. Thanks
sure why not!
How do you open key fob to change the battery
I asked that very question, was told they would send video via email still waiting a week ago!
Hi can you please do this for a innokim light 2 please?
Corri Taylor no problem it can be done
Is this system universal for scooters as well as ebikes? Appreciate for reply if it is.
Lee Andrada yes universal. You just need to know how to connect
Please Do this instruction on zero 9! 😁
Hi, a normal ZERO scooter should have what is found inside the video. This would apply to all the models but extracting the wires from controllers etc differs :)
I have one of these, but they get really warm for some reason. Concerning.
The remote controller gets warm or the alarm gets warm?
@@FalconpevSg the alarm that is inside the scooter.
@@maxsinventions8913 not sure if your connection is right
Hello is this compatible with the Xiaomi M365 pro 2
Cool. There’s no product purchase information for USA buyers. Also, does installing this void any manufacturer’s warranty? Thank you.
It should be done by an official ZERO dealer but if you were to do by yourself, this how to video should be easy to follow!
Falcon PEV 1.) Where do people in USA purchase this immobilizer? 2.) If I install it myself, does it void or affect my scooter warranty?
FL HANDSTER with rev rides. Warranty will not be void if done by an official dealer like rev rides
I’m in New Zealand , where can I buy I have Zero 9 scooter...?
Freed PEV
can we install this on normal scooter
how to change the batery in that remote?
yeah how?
If i lose both remotes, is there a way to pair a new remote to the immobilizer device?
No just swap out the Immobilizer
What is the operating voltage of the alarm. I want to test the alarm before installing .
12V
I just found the same system alarm on amazon but theres a 5 wires but the 3 color you meantion is there black red orange, should i follow your 3 wires ?
Kevin Rodriguez the 5 wire is more complicated thats why we fixed up the 3 wire one
Falcon PEV i have a problem with the white wire, either opposite?
Problem solve, black to black, red to(red,controller) orange to (red, throttle) The white wire you do not working to me
My ebike not working after installing anti theft alarm. Its like locked permanently. No idea to fix this issue. Please somebody help me...
Did you buy from us?
How do i change battery of the remote?
remove the casing and you will see the 3V round battery.
Where can I buy this from in the UK?
You can ask them at your nearest authorised dealer of ZERO ;)
Battery what size & how remove from remote??🤔
Work whit Manits, the color of wire are the same?
wires usually use the same color for same function, please do check with the dealer
Update us if there's GPS Tracker too
Did you order a spy in the company? Cause it could be coming out soon!
How do you change the battery of the remote??
We have a video that shows that
Quel dommage si vos vidéo était traduite en français vous feriez un malheur en France, bien le bonjour et merci pour toutes vos vidéos.
Sorry what is that in English?
@@FalconpevSg He says that it's a pity, because if your videos were in french, you would have a lot of success in France. And he also says "Hello and thank you for your videos"
does it work on a zero 9 ?
Yes it does, i just connect them now but still im having trouble where to insert the deshell alarm , anybody can suggest?
Hi,
How do you change the battery?
open up the plastic key casing and you will find a 3V round battery
Hey, what îs the purpose of the green wire?
same question
Is it the same procedure to install it on the zero 10x ??
samir koper yes but it’s better to consult with us or bring it to a dealer to get it installed
@@FalconpevSg yeah the problem is that I live in sweden .. there is no dealership or service shops here.. is there maybe a diagram how to connect it .. so I can bring it to a electrician or bike shop ?
Will this work On Segway ninebot e-scooters too?
W van Hofjes yes absolutely
Falcon PEV okay cool bro!
What if we are inside our working area, we cant turn it off via mobile app?
No you will have to use ZEROtrk GPS for that
@@FalconpevSg can the zero trk be connecte of this immobilizer? Does this 2 can work together? And what is the use of this green wire that has 1 niddle?
GPS tracker, add too
Its coming!
How do connect my spare key fob to the scooter after the first one is broken?
I bought my quickwheel explorer with only 1 key fob and I have lost it so can’t unlock my scooter! Any ideas?
Remove the receiver inside the unit
@@FalconpevSg after a while of digging through and trying not to damage any wires I found the receiver! I have unplugged it but didn’t work? Would it work if I bought a new receiver and swap it with the old one?
Will it work with Zero 11x?
edzha25 yes it should
Can this fit on the Dualtron Eagle pro?
choi lau yes it can
Can you send me the link for this alarm and other bits please
choi lau here you go www.falconpev.com.sg/collections/zero-accessories/products/scooter-immobilizer?_pos=1&_sid=12ca70a01&_ss=r&variant=32256877002883
Will it work on coffee rider 1000w and if can work whats the alarms name
Cofeee rider???
@@FalconpevSg go to google and write coffee rider
Hi can I buy one of theses thanks
sure you can :) Links in the video and description!
Can I have a link please
What battery does the key take?
3V round batteries
@@FalconpevSg 2035?
@@felonebike9859 CR2032
I have this scooter on my home its 630 dollars
Pretty good video but you said TREE instead of THREE . Learn how to speak better english.I was lookng for the tree!!!😂
I’ve been taking lessons, thanks 🙏
how to change the batery in that remote?
You have to remove the plastic casing to reveal the 3V battery inside
Will it work with Zero 10x?
St. Dietrich yes it will
@@FalconpevSg But what about key start? Should it be dismounted to use this alarm?
@@st.dietrich437 yes should disable key start.