Beam 230 7r no light FIXED!!

Поделиться
HTML-код
  • Опубликовано: 17 окт 2024
  • Quick fix for a non-working lamp for Beam 230 7r. Here are the steps to get your fixtures working!
    In your fixture main menu click on Manual.
    Then click on Lampcontrol and set to ON.
    You will see lamp turn on
    Once lamp turns on DO NOT mess with any other functions.
    To Exit Manual click on BACK.
    Now that you’re back in fixture main menu turn fixture off by using switch located beside powercon connector and turn back on.
    This should reset the Lampcontrol to OFF and lamp should work again.
    Comment if you have any questions
    Hope it works!

Комментарии • 21

  • @dinalin1
    @dinalin1 8 месяцев назад

    HY!
    My MH7R its moving, lamp is on, but dont change colour and gobo, is only pale white. An advice? Thank you!

  • @davidappiah7741
    @davidappiah7741 Год назад +2

    Hi sir my beam 230 is showing change lamp, I have changed lamp and ballast but is not working

    • @kennylunaaa5596
      @kennylunaaa5596  Год назад

      I would make sure all of your wires are connected properly.

  • @LuisAlvarez-lz7uw
    @LuisAlvarez-lz7uw 5 месяцев назад +2

    Tengo una beam 230 enciende normal el bombillo pero al rato se apaga el bombillo me voy ala pantalla le doy lámpara on y enciende y al rato se pone lámpara off

  • @shanewallace9285
    @shanewallace9285 2 года назад +1

    Hey my lamp is saying lighterror on the error log everything seems to work except the lamp it won't come on. ?

    • @kennylunaaa5596
      @kennylunaaa5596  2 года назад

      There is a possibility that the lamp disconnected. You would have to open the fixture up to see inside.

  • @aclizarda
    @aclizarda 2 года назад

    Did you change your igniter ballast or power supply?

    • @kennylunaaa5596
      @kennylunaaa5596  2 года назад +1

      I did not. For some reason the lamp control has to be reset. Make sure when you turn the lamp control from OFF to ON to ONLY do it ONCE. If you previously had already messed with the lamp control,turn the lamp control on and off a couple of times until you see the lamp strike on. I recommend removing the housing covers to see inside easier.

    • @aclizarda
      @aclizarda 2 года назад

      @@kennylunaaa5596 ok..let me try that

    • @kennylunaaa5596
      @kennylunaaa5596  2 года назад +1

      @@aclizarda goodluck man. Hope it works

    • @aclizarda
      @aclizarda 2 года назад

      Hey man..its a good thing i removed the housing..and you re right..so that u will see whats wrong with it..i see that the bulb was dislocated in its correct position...maybe its because of the shipping fault ..lol...the moving ok now..thanks man..im gonna buy another one..✌️😎

    • @kennylunaaa5596
      @kennylunaaa5596  2 года назад

      @@aclizarda that’s awesome!

  • @RammyFernando-x9d
    @RammyFernando-x9d 10 месяцев назад

    Sir dko masundan ang bilis po kc demo new po