The ports you will typically use are the same ones the oil pressure switch uses, they should have a "T" with a Schrader valve. Dont use the one on the oil pump - thats gross oil pressure. The other is reading the body of the compressor (for any compressor). For Compound Cooling compressors, thats the "mid" pressure, or as Carlyle calls it, the Interstage. If you dont have that fitting, on the small bodies, use the one he showed, or one on the interstage line itself (on the compressor side of the shut off valve on the interstage). But if you have none of those, on the big body, its the Shrader valve directly above the oil pump.
Hes talking about a pressure regulating valve thats connected from the discharge header into the interstage header on some racks. In case of multiple low side valve plate failures, and a subcooler thats off, the interstage pressure could fall so far that the compressors with no valve plate issues will see extremely low compression ratios on the low side. That will cause them to break reeds as well.
Love this video ran into this issue on a phoenix rack the other day with oil issues and came to the conclusion that one of the compressors was blowing by into the crankcase. Valved off that compressor until we can get new plates and the oiling issues have seem to go away.
buenas tipo de cul ta de descarga compresor 06CC DOBLE ETAPA POR FAVOR ando algo perdido gracias
Thanks for the info!!!!?
What port do you use on a big body carlyle compressor for crank case pressure?
The ports you will typically use are the same ones the oil pressure switch uses, they should have a "T" with a Schrader valve. Dont use the one on the oil pump - thats gross oil pressure. The other is reading the body of the compressor (for any compressor). For Compound Cooling compressors, thats the "mid" pressure, or as Carlyle calls it, the Interstage. If you dont have that fitting, on the small bodies, use the one he showed, or one on the interstage line itself (on the compressor side of the shut off valve on the interstage). But if you have none of those, on the big body, its the Shrader valve directly above the oil pump.
Its very hard to find video information about these compound cool compressors. This is awesome man Great information!
The “ interstage pressure valve quote that you mentioned! Are you referring to the relief valve under the plate? Please explain this more.
Hes talking about a pressure regulating valve thats connected from the discharge header into the interstage header on some racks. In case of multiple low side valve plate failures, and a subcooler thats off, the interstage pressure could fall so far that the compressors with no valve plate issues will see extremely low compression ratios on the low side. That will cause them to break reeds as well.
Thnx, taylor!
Love this video ran into this issue on a phoenix rack the other day with oil issues and came to the conclusion that one of the compressors was blowing by into the crankcase. Valved off that compressor until we can get new plates and the oiling issues have seem to go away.
Thanks for the info. What if I have a single compressor unit running -40⁰C? I think I've got bad discharge valves and also an overfeeding txv.
Very well explained thanks man for taking the time to make video, and for sharing it.
Great info man. Thanks
Thank you for taking the time to upload this info.
Great info thank you so much.
Great info! Keep it coming
Thank you.
Good work 👍
Awesome info!