I have been working on motocross engines for almost 10 years, and I just bought my first CNC mill and will be getting 2 more manual mills and a lathe this week to make MX parts. Watching these videos is like heaven on earth to me.
Nice work, looks better than new . In my experience, the CRF seems to be prone to top end issues , at best they like the valves to be set just right ,or they can be a dog to start . I also have KTM SX ,no problems there,and it out performs the CRF in every test . Thanks for a very professional video. Respect from Down Under
Should have washed and cleaned the head (carbon deposit) and honed guide to valve stem before installing new valve seals. But you have talent and tools for the talent! Great video!
Втулки ремонтные изготавливаются из латуни и впрессоваваются нагорячую(корпус нагревается в кипящем нигроле(200-250С.°) и впрессовавается(впрессовавается всмысле нагорячую само входит и при охлаждение корпуса обжимается),втулка прямая без бортика(без расширения),также нагорячую прессуются подшипники и даже иногда коленвалы и сразу закалка маслом через сутки будет видно.
I loved that machining part but not so much that welding part, porosity all over the weld. I know it gets a sleeve but this part could've been done better in my opinion. Great tools and that boring attachment for your mill looks awesome!
@@PaulXchannel you make great videos, I like the format and the music was great! 👍 And the porosity can be seen at 11:39, 11:41 and 11:45. That particular cylinder head was probably okay, however if I would’ve finish mu job like that my boss would fire me 😂😂
The head must be made of unobtainium! Or your labor is free. Time to buy a new head along with the rest of the bad parts. But your video is worth watching. Thanks.
Super nice but ? Mill quill on angle is a pain. Why do you not prefer head mounted to sine plate. Locate pin with quill at perpendicular to table top adjust sine plate perpendicular to pin? Curious Thanks
can you show detail about stator crf250r... some people can make the stator to charge the battery .. and till now i never seen on anywhere people do about that crf250r stator 😁😁
I think this aluminium head will expand with a heat, is this not too tight clearance between the bush and the valve cup? It look like it's less than 0.01 in your video. Thank you.
I have been working on motocross engines for almost 10 years, and I just bought my first CNC mill and will be getting 2 more manual mills and a lathe this week to make MX parts. Watching these videos is like heaven on earth to me.
I wish you a lot of success.
@@PaulXchannel could you make a valve bucket sleeve for a 2006 kx250f? My head is damaged and I need one
Sos maravilloso!! Yo vivo en un país que para tener tus herramientas hay que ser multimillonario , una lastima, te admiro!
there is a lot of professionalism in these videos. compliments
Thanks
You have my dream job,i currently work something else so one day I can build a garage like yours,keep it up
👍
Nice work, looks better than new .
In my experience, the CRF seems to be prone to top end issues , at best they like the valves to be set just right ,or they can be a dog to start . I also have KTM SX ,no problems there,and it out performs the CRF in every test .
Thanks for a very professional video.
Respect
from
Down Under
This Old Tony has got some serious competition here!
Belíssimo trabalho, muito rico em detalhes. Uma verdadeira aula. 👏👏 Ansioso para assistir a parte 2.
Excellent work a pleasure to watch you repair things...if i ever damage anything like that you'll be getting it for repair....
Thanks
Very, very nice Job👍👍 Respect💪
Should have washed and cleaned the head (carbon deposit) and honed guide to valve stem before installing new valve seals.
But you have talent and tools for the talent! Great video!
Thanks.
You need to watch the video to the end.
Continued in the second part.
ruclips.net/video/oiUVUv90o2w/видео.html
The slow no from drilling the sleeve was so nice! Lol
i'm glad you have all that special equipment ???
Stronger than new! Excellent job!
Втулки ремонтные изготавливаются из латуни и впрессоваваются нагорячую(корпус нагревается в кипящем нигроле(200-250С.°) и впрессовавается(впрессовавается всмысле нагорячую само входит и при охлаждение корпуса обжимается),втулка прямая без бортика(без расширения),также нагорячую прессуются подшипники и даже иногда коленвалы и сразу закалка маслом через сутки будет видно.
Приятно читать Русскую речь под забугорным видео)
Сука,
там станков и инструмента на лям.😨
А он ремонтирует какой то мопед
Amazing job very nice video and the work was done very well! Thing definitely got messed up but almost all back to good now!
Thanks
Wow, amazing. Never seen this done before. Thanks for sharing.
I loved that machining part but not so much that welding part, porosity all over the weld. I know it gets a sleeve but this part could've been done better in my opinion.
Great tools and that boring attachment for your mill looks awesome!
Thank you for watching.
The weld did not contain any bubbles.
The weld was good.
@@PaulXchannel you make great videos, I like the format and the music was great! 👍
And the porosity can be seen at 11:39, 11:41 and 11:45. That particular cylinder head was probably okay, however if I would’ve finish mu job like that my boss would fire me 😂😂
Ok
Amazing machine work 👍👍 made it look pretty
Bravo 👍 bel lavoro pulito hai svolto sulla testata direi molto meglio di una officina rettifiche
Thanks
Todo bien pero falta la rectificación del asiento un abrazo gracias por impartir conocimientos saludos desde campamento 2de octubre México
Repair videos are the best videoooss!!
Best of machine !!!!😍😍😍😍😍😍
I love ur channel, I hope I can afford tools like yours someday, new subscriber here ❤️
Como siempre un buen trabajo, da gusto verte trabajar.
The head must be made of unobtainium! Or your labor is free. Time to buy a new head along with the rest of the bad parts. But your video is worth watching. Thanks.
It is impossible to not watch The best REGARDS Ziggy Canada najlepszego zycze
Parabéns,seu trabalho me inspira a seguir aperfeiçoando !
Broo your work is art and more!! nice work and video
Thanks
Your videos are awesome!
Thanks for watching
Quando tem recurso para fazer fica um trabalho nota dez Nunes Motos
Now that my friends is some serious machine work amazing!!!
That’s awesome and nice work 👍
Thanks
Man this vid is just amazing don't understand why 25 dislikes
Thanks for watching
Very very nice! Keep up the great work👌👍👍
Thanks
Hi.very good
Thanks
I'm always amazed at the way you work. Without saying much. Sorry, where do you come from? (I am Indonesian).
Thank you very much.
Europe.
Класс. Приятно смотреть как работает мастер!
Sir, the video is excellent! You can become a professor in MIT! Thank you🙏
That is some really nice work.
Thanks
Estou sempre acompanhado seu trabalho, vc e muito bom no q faz Show 🤟🐢
The only bit that got me worried was the filing down of where the bush is in the camshaft bearing journal... all good in the end though 👍🏻
Ok
Sto toccandomi le balle che non mi succeda. ...ma nel caso malaugarato...questo lavoro cosa costerebbe farlo e se lo fai nel mondo? Sei un artista 💪
Salute from india🥰
NICE..
果断订阅 很好的工程👍
Nice... 24.000. Damm accurate.
Subscribed!👍
Excellent Job, keep it up,.. Thanks
Thanks
Super nice but ? Mill quill on angle is a pain. Why do you not prefer head mounted to sine plate. Locate pin with quill at perpendicular to table top adjust sine plate perpendicular to pin? Curious Thanks
Ok
Nice ,good job 👍
Thanks
How come only one valve get impact? Is it due to exceeding max. valve lift?
Verry good job
Where you do this great job? I'm from Poland and i have some cylinder head to repair.
Paul do you offer cylinder head repairs? Your work is great and videos are awesome. Thanks.
Thanks.
I'm sorry I'm busy.
you have a page lke buy some parts, part camshaft stage 1 damage
Pehhhh andalannn 🔥
Very cool. Subbed 😎
Thanks for watching
Well done !
Thanks
SOLID...
what coulkd be cuasing my bucket to be stuck
Salam dari Indonesia
gud day my idol your so talented
Thanks
@@PaulXchannel you should work for Space X
Thanks
Faszinierend!!!
Beautifull job really, what kind of aluminum did you use? Many thanks for the videi
Thanks for watching.
AlMgSi0.5
Awesome 😎
Beautiful👏👏👏👏👏👏👏👏👏👏👏👏😎😎😎
Thanks
Good worke
Sangarr broo👍👍
Wasnt there a giant crack at the opposite side of the weld?
Excelente video gracias
Thanks
can you show detail about stator crf250r... some people can make the stator to charge the battery .. and till now i never seen on anywhere people do about that crf250r stator 😁😁
4 stroke. How many? 2 hp?
I think this aluminium head will expand with a heat, is this not too tight clearance between the bush and the valve cup? It look like it's less than 0.01 in your video. Thank you.
It's my standard procedure that works.
Man I love how perfect you got that bucket to fit. It’s almost like you’ve done this once before? Lol
How much do you charge for this service?
Good video, but waaaay to many comercials.. Charge more for your skilled work , and hold back on the adds 😎
Is a new head not cheaper than the shop time?
solid 👍🏻👍🏻👍🏻👍🏻
Muito bom excelente trabalho 🇧🇷
SUPER MASTER 100%
Thanks
Скажи,сколько стОит такая работа?В какой это стране?
¡¡Qué calidad!!
And what happens at temperature when the loctite loosens and the sleeve goes loose?
Don't worry.
This Loctite holds well even at high temperatures.
How to diagnosis ktm adventure whit pc ?
always clean perfct
Thanks
Some doubt that the sleeve glued with Loctite will stay in place for a long time.
mierzyłeś na zaciśniętym hamulcu w mikrometrze:D
Nice work, but you forgot to ream the new valve guide after pressing it in.
I did not forget.
It was not necessary.
Excelente trabajo
Techno - orgasm!!! Bravo!
Thanks
Great work man! Wish u were in the states....have a ton of work for u....any way to contact u for work? Or a website or something
Thanks for watching.
It is just hobby.
THE BEST
Thanks
I wish these legend right here have Clones
Why do these engines go bad? I have a keeway scooter 150cc 80 thousand kilometers and no issues still.
scooter Honda 1 000 000 km no problem
@@PaulXchannel 🤤
Btw how did you learn to do this,how can someone learn to rehaul motorcycle engines?
Oh I thought the crf 250 was dohc 4 valve not sohc 4 valve. Cool design
The more you know
dr 650 have the simplest sohc 4valve system:P
Hi master is there any way to contact you.
What an art
15:05 bit name ?
Nylon Fiber Flap Polishing Wheel
Tenho um cabeçote dessepara recuperar .eu não acho ninguém para fazer esse serviço.
From indonesia