Are the home assistant devices also visible in the 1home configurator? (so two way device communication) Because that would be very useful. So you can add a zigbee device in Home Assistant and create scenes, automations in the 1home config.
Currently its only one way - so 1Home devices (i.e. KNX bridged devices) into Home Assistant. You could however get a Zigbee-Matter bridge and then with the 1Home Server “integrate Matter accesories” feature coming in Q1 2024 get them inside 1Home to configure automations.
@@chrisger555 If I understand correctly, you are suggesting that you create a "virtual" KNX group address, integrate it in 1Home Server as a "virtual" device (e.g. On/Off plug) and then in HA create an automation to change it's state depending on another HA integrated device. While this is technically possible the workflow is not the best.
I have mix Smart Home products at home from Matter,zigbee,Loxone and KNX With a single 1 home server can I bring this all together ? And also control it all with voice controls
I'll try to break it down. 1. Matter - I assume this means Matter accessories like Eve smart plugs, Nanoleaf smart bulbs, etc. With the “integrate Matter accesories” feature coming in Q1 2024 you will be able to get these devices into the 1Home Server. 2. Zigbee - You will need to use a 3rd party Zigbee-Matter bridge. Afterwards you will be able to add the Zigbee-Matter bridged devices into the 1Home Server with the “integrate Matter accesories” feature coming in Q1 2024 - just like with point no. 1. 3. Loxone - We have the 1Home Server for Loxone which bridges devices into Matter. 1Home Server for Loxone is launching in Q1 2024. 4. KNX - We have the 1Home Server for KNX, which bridges devices into Matter as well. Once your devices are in the 1Home Server, either coming from Matter (points 1 and 2), from Loxone (point 3) or from KNX (point 4); you will be able to use them cohesively in the 1Home Server automations feature.
Wow this makes adding kns devices to home assistant much easier! Well done!
Are the home assistant devices also visible in the 1home configurator? (so two way device communication) Because that would be very useful.
So you can add a zigbee device in Home Assistant and create scenes, automations in the 1home config.
Currently its only one way - so 1Home devices (i.e. KNX bridged devices) into Home Assistant.
You could however get a Zigbee-Matter bridge and then with the 1Home Server “integrate Matter accesories” feature coming in Q1 2024 get them inside 1Home to configure automations.
You would maybe just do this by creating the address you would like to write to, expose with matter, and write to from HA?
@@chrisger555 If I understand correctly, you are suggesting that you create a "virtual" KNX group address, integrate it in 1Home Server as a "virtual" device (e.g. On/Off plug) and then in HA create an automation to change it's state depending on another HA integrated device. While this is technically possible the workflow is not the best.
@@GregorKrmelj1h
I was not thinking optimal workflow, but can it be done. ✌
@@chrisger555 correct :)
I have mix Smart Home products at home from Matter,zigbee,Loxone and KNX
With a single 1 home server can I bring this all together ? And also control it all with voice controls
I'll try to break it down.
1. Matter - I assume this means Matter accessories like Eve smart plugs, Nanoleaf smart bulbs, etc. With the “integrate Matter accesories” feature coming in Q1 2024 you will be able to get these devices into the 1Home Server.
2. Zigbee - You will need to use a 3rd party Zigbee-Matter bridge. Afterwards you will be able to add the Zigbee-Matter bridged devices into the 1Home Server with the “integrate Matter accesories” feature coming in Q1 2024 - just like with point no. 1.
3. Loxone - We have the 1Home Server for Loxone which bridges devices into Matter. 1Home Server for Loxone is launching in Q1 2024.
4. KNX - We have the 1Home Server for KNX, which bridges devices into Matter as well.
Once your devices are in the 1Home Server, either coming from Matter (points 1 and 2), from Loxone (point 3) or from KNX (point 4); you will be able to use them cohesively in the 1Home Server automations feature.