⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thanks by the way. You did a video on the front airbags sensor. I discover the sensor on the car was unplugged after original owner have a minor crash. Cosmetic damage but it was not reconnected after repair. Your video saves me a bunch of money
I tried to apply pressure on the rear wiring harness by pushing it to the right but it didn't move and I wasn't able to disconnect it. How did you remove it? Is there a trick in doing it? I don't want to break that thing.
@@Bakdons-yn3cg I know it is plastic and you want to be careful. The part of the video we are talking about is at about 7:38. Make sure you are pushing it in the correct direction (I am sure you are.) All I can suggest is keep applying a little more pressure at a time until it comes out. Good luck.
This is a backwards way of doing this. Just remove the glovebox and cupholders and you don’t have to remove all that extra stuff by the door or the glovebox hinges
Thanks guys for all you do . I’m having problem with my hazards light not going off I press on the switch and they still on . I think it may be a relay issue but I can’t find the right relay
great job i always enjoy your videos they are helpfull and i have a question on my 2013 BMW X3 xDrive35i 3.0L can you please tell me what are the modules back in the trunk ont the left side which is some of them missing and i wnt to replace them thanks
Hi Can I ask you about this module. My car is 1 series 2007 I had a some strange noises coming from this box when I stopped the car from the (start and stop button) then immediately I start it again and then the noises started. The lights on the Dashboard started flashing and the key stock in the ignition. Do you know what is the problem?
I watch a lot of your videos and they have been helpful I’m having an issue with the fuel pump I drive my 2011 328i xdrive and all of a sudden it just shuts of barely able to steer and pull off to the side of the road the message on the screen says fuel pump failure waited over an hour and it started right back up no problem drove home changed fuel pump watching one of ur videos thought it was fixed drive a few days later did the same thing waited 10 mins and it started up again no issues it keeps doing this need your help!!!
Cam sensor and vanos cleaning then clean cam witch is the crank under the starter, then change oil and cap if that font fix it clean throttle body after that hit spark plugs take them out wire brush if that don't help change coils . If those font work replace black box fuse in glove compartment
I scored a nice running ( like new) 06 bmw 330i. And if you have one you and this guy are automatically friends lol. It’s god steering wheel lock displayed and seems not reading the fob ( batt. Not dead) in car or fob. Cluster communication error but this is why I got it cheap !!! It is nice though.
How can I test if the BCM is faulty and where can I buy it if it needs to be replaced? Currently the cars cluster lights up and wipers won’t stop moving. I have checked ECW as well as the FRM and they are both working fine according to ECU-Pro. I have a 2008 BMW 328xi
Hi mate, good vidéo thanks ;) I dont understand whether or not WE must unplugged the battery beforeremoving thé jbe? As you Saïd : IS really it mandatory as i have been told that removing battery Can bring issues for some programming modules, memory stufff ... Or am i wrong? Then, do you know if WE must redo programmation if i plug a New jbe cause mine seems to be damaged no more AC, Rear door windows (i already checked with my mecanisc Friend with BM soft)
Hi i got a 2007 bmw 335i my problem is that i am not getting the dme to wake up, have no power to my dash. when i disconnect the bcm the car turns on. i tried replacing the bcm module with use ones and i am still getting the same result. any suggestions will be appreciated. thanks
Hello guys, looking for some help here. I have an 07 bmw e92 325i, which wipers arent working properly. I have checked relays. Fuses, replaced the wiper motor, tested known good steering columna with new wiper controler lever, cleaned the frm module. I haven't tested the bcm module yet, do you think this may be the root of the issue? Any help will be pretty pretty appreciated! Great vid btw, you guys always help!!!
Hi. I have 2009 bmw 120d e87 and i have fault code 2e41 engine ecu interface. I have checked all fuses and relays all loks ok. Bat the car would only crank no start,the key is locking and unlocking car no problem. Any recommendations to where to look next or what to do next?
Hi I’ve an 2010 E91 my blowers and air con just died plus stop start isolator stopped working even when I have my lights on the unit does not light up is it fuse’s or module or BCM as everything else is running spot on
Hi I have an e93 2011 my logic 7 amp has no power in the harness and the fuse is good do you have any ideas please no acoustic sound happened after pulling some fuses out
Does it control the key for open and close as well ? Mine does not work . Sometimes after a ride the key starts working again . So i can close and open by pressing the key . After sitting for 15min . The key does not work anymore when i press the open or close button
friend, I have a BMW E91 (330D touring) 2007, the radio only touches one side of the car, the left side is muted, there is no problem with the cable, the radio is not burned out, you can tell if this module of the body also controls the radio?
Good video but you miss a step in your explication and it's a very important step. Im talking about the back connecter at end of the video. Every step is perfect but i had to find this information in other chanel. But over all it help me a lot utile i got to this part. He talk about pulling the back clip to the right. That is acually true but before to do that you need to pull the modul out of his trey and twist it a little bit so you can slide the clip up inted of just saying to pull the clip to the right.
I have 2006 bmw 325i I'm having a issue with car not doing nothing wen I insert key dash stays black car don't turn on I have interior lights also unlock and lock buttons work I checked all fuses and replaced relay in dash
i have a 2007 530xi wagon everything lights up to start but the starter just clicks twice,,,Code DTC U112B Lost Communications with Instrument Pack Status (SIG) ...Do you think it is the BCM? thanks! iF YES IS IT LOCATED in the same spot as this video remember it is a wagon?
Hey, could you explain fault code with I get 50 MRS power supply for bmw e83? I have airbag light on dash but can’t find info. Would think that I need to change steering spring but not sure if you could explain would be awesomely. Thank you
I've seen a video on RUclips saying the electronic control module situated behind the glovebox is responsible for auxiliary coolant pump, glowplug module and thermostat? These parts are throwing me fault codes and I'm wondering could it be the module before I change the rest. The auxiliary pump is working when tested on the bench? Thanks
Hi !! I have a e 64 630i it cracks , but will not start (sometimes it starts fore ONE SECOND... ) I exedently put 12VOLT on the CANBUS wire (red/blue+red) sow i cheqed all the relais and fuses they al work.. i messurd the ohm on the canbus and it has onley 20ohm and on the computer unplugged 45ohm ... What doe you think please thank you !!
Hi i have to replace my BCM modul it's ok if replace with one from a same car same engine code? or its have to be programmed? It's can burn out something if i only replace with another one?
I have a problem with transmission with bmw e90 320i gearbox emergency i can’t drive i have changed the automatic oil and the filter but the same thing is the problem there at this part what u have changed please help me
Seems the question regarding whether you need to code the replacement module or not is still pending. Anyone knows? I have no power to the AC blower and the fuse is fine. I'm suspecting something is wrong in that junction box. Thanks in advance.
Hi, My central locking has stopped working on my car. When I press it to unlock it opens all of the locks, but it does not lock all of the doors when I press the locking button either on the key fob or the inside of the car, it only locks the driver door. Any advice? BMWe87 120d 2005
Good day i have a bmw 1 series 120i Car has no spark No pulse No power on plug that goes in the valve tronic And no power on the crank sensor plug What could be the problem
Hy i have a problem with bmw e91 320d 2005 when a turn up the fog light and push the brake dont show the brake in the right if i turn off the fog light the brake work ?
I have a faulty PDC… in BMW e64 convertible, changed sensors and wires straight from BMW but there is no sound nor these sensors work…. WHAT CAN I DO??
My fuel gauge, central locking ( the indicators flash and the car powers off but the actuators don't lock), air conditioning(cooling) and wipers do not work (wipers turn on and stop on the middle of the screen), The only code I get is a 5E5B DSC button code and A738 JBE power supply interrupted code. Everything else works. Is it a FRM or the JBE that is faulty?
Where the hell is the Transmission control module located on a bmw 335i 2007? I have looked absolutely everywhere and its like the TCM doesn't exist in a BMW 335i. Is it called something different? My cars code keeps reading back to my TCM but the TCM is impossible to locate.
Hi mate,you must reprogram your New jbe box before start engine as it will not work and must bring some new issues as it will not be recognised by your car system
seriously BMW need to have a recall with this I already took the car literally 5 times at the dealership in the past couple years with the e92. it's literally a money pit it's awesome and drive but it spends more time at car shop then being on the road 😮😭😠😡 I'm really tired of this car!!! Time to sell or drop it off the wrecking yard. BMW build quality with electronics and longevity isn't what it use to be like in the 80s&90s
I have a 2005 BMW 645ci, I keep getting the Anti Trap Malfunction Light. I know how to reset it, and keep having to reset it all the time, the only strange thing is as long as the engine is running or the key is in the accessory position the windows are fine. ( up or down positions ) but if I shut the door the system fails to remember to roll up the window, and sometimes forgets to drop the window if I open the door. The latest issue is if I drop the top the driver's window won't go up all the way ( does it sometimes ) It will go up till it hits the seal the drops back down. Like I mention before It doesn't forget if I have the engine running or the key in the first position. Wondering if it's the BCM or power going to a specific module that supplies power to whatever controls the ANTI TRAP. Thanks, Guys!
such a rubbish and ass trash engineering bmw . why no a simple wire from battery to the light with fuse ??? the same reason german lost the war. rubbish engineering
I have an 06 bmw 330i, i replaced both primary and secondary fuel pumps and i still dont get any fuel pressure i checked the fuse, the fuse is good. What could the issue be? Mind you theres no fuel or any type of pressure coming out when i disconnect fuel line
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Hello, where is modul in BMW E87 2005? Thank you.
Is there a fuse for the bcm I have battery drain but would like 2 know its that first
There shouldn't be any dislikes. This video is super helpful & great explanation!!
Thanks by the way. You did a video on the front airbags sensor. I discover the sensor on the car was unplugged after original owner have a minor crash. Cosmetic damage but it was not reconnected after repair. Your video saves me a bunch of money
Without seeing how that rear wiring harness came out it would have been very difficult to figure out. Thank you!
I tried to apply pressure on the rear wiring harness by pushing it to the right but it didn't move and I wasn't able to disconnect it. How did you remove it? Is there a trick in doing it? I don't want to break that thing.
@@Bakdons-yn3cg I know it is plastic and you want to be careful. The part of the video we are talking about is at about 7:38. Make sure you are pushing it in the correct direction (I am sure you are.) All I can suggest is keep applying a little more pressure at a time until it comes out. Good luck.
This is a backwards way of doing this. Just remove the glovebox and cupholders and you don’t have to remove all that extra stuff by the door or the glovebox hinges
Does this require to be reprogrammed and will this issue fix a iDrive screen that turns on but no picture no sound from chimes or no radio sound.
Thanks guys for all you do . I’m having problem with my hazards light not going off I press on the switch and they still on . I think it may be a relay issue but I can’t find the right relay
You just got ur self another sub every video is well done thanks
Replacing BCM module with same OEM number required recoding or is plug and play?
You guys have helped me out soooooo freaken much thank you !
Do i need to program the new module ? Or just is "plug and play"?
great job i always enjoy your videos they are helpfull and i have a question on my 2013 BMW X3 xDrive35i 3.0L can you please tell me what are the modules back in the trunk ont the left side which is some of them missing and i wnt to replace them thanks
Nice video! I use your instruction with success! Thank you!
Hi Can I ask you about this module.
My car is 1 series 2007
I had a some strange noises coming from this box when I stopped the car from the (start and stop button) then immediately I start it again and then the noises started. The lights on the Dashboard started flashing and the key stock in the ignition.
Do you know what is the problem?
I watch a lot of your videos and they have been helpful I’m having an issue with the fuel pump I drive my 2011 328i xdrive and all of a sudden it just shuts of barely able to steer and pull off to the side of the road the message on the screen says fuel pump failure waited over an hour and it started right back up no problem drove home changed fuel pump watching one of ur videos thought it was fixed drive a few days later did the same thing waited 10 mins and it started up again no issues it keeps doing this need your help!!!
Cam sensor and vanos cleaning then clean cam witch is the crank under the starter, then change oil and cap if that font fix it clean throttle body after that hit spark plugs take them out wire brush if that don't help change coils . If those font work replace black box fuse in glove compartment
I scored a nice running ( like new) 06 bmw 330i. And if you have one you and this guy are automatically friends lol. It’s god steering wheel lock displayed and seems not reading the fob ( batt. Not dead) in car or fob. Cluster communication error but this is why I got it cheap !!! It is nice though.
How can I test if the BCM is faulty and where can I buy it if it needs to be replaced? Currently the cars cluster lights up and wipers won’t stop moving. I have checked ECW as well as the FRM and they are both working fine according to ECU-Pro. I have a 2008 BMW 328xi
Same thing on my 335i
ABS module
Hi mate, good vidéo thanks ;)
I dont understand whether or not WE must unplugged the battery beforeremoving thé jbe? As you Saïd : IS really it mandatory as i have been told that removing battery Can bring issues for some programming modules, memory stufff ... Or am i wrong?
Then, do you know if WE must redo programmation if i plug a New jbe cause mine seems to be damaged no more AC, Rear door windows (i already checked with my mecanisc Friend with BM soft)
TQ for the great info. really appreciate your videos
Hi i got a 2007 bmw 335i
my problem is that i am not getting the dme to wake up, have no power to my dash.
when i disconnect the bcm the car turns on.
i tried replacing the bcm module with use ones and i am still getting the same result.
any suggestions will be appreciated.
thanks
Perfect job, very well done.
thanks for sharing.
Do you need to have BCM module coded before replacing it with a used part
will a new BCM plug and play or does the DCM need to be calibrated to the car
What does BCM MODULE and what is the reason you remove it and if you put new one do you need to do programming ?
You need to know the ID number written on it to be able to do right programming
Hello, Would you guys be able to make a video on how to remove, replace and test your FRM module?
Hello guys, looking for some help here.
I have an 07 bmw e92 325i, which wipers arent working properly. I have checked relays. Fuses, replaced the wiper motor, tested known good steering columna with new wiper controler lever, cleaned the frm module. I haven't tested the bcm module yet, do you think this may be the root of the issue?
Any help will be pretty pretty appreciated!
Great vid btw, you guys always help!!!
Hi.
I have 2009 bmw 120d e87 and i have fault code 2e41 engine ecu interface.
I have checked all fuses and relays all loks ok.
Bat the car would only crank no start,the key is locking and unlocking car no problem.
Any recommendations to where to look next or what to do next?
It's need programming also after replacing ?
Hi I’ve an 2010 E91 my blowers and air con just died plus stop start isolator stopped working even when I have my lights on the unit does not light up is it fuse’s or module or BCM as everything else is running spot on
Hi I have an e93 2011 my logic 7 amp has no power in the harness and the fuse is good do you have any ideas please no acoustic sound happened after pulling some fuses out
Does it control the key for open and close as well ? Mine does not work . Sometimes after a ride the key starts working again . So i can close and open by pressing the key . After sitting for 15min . The key does not work anymore when i press the open or close button
friend, I have a BMW E91 (330D touring) 2007, the radio only touches one side of the car, the left side is muted, there is no problem with the cable, the radio is not burned out, you can tell if this module of the body also controls the radio?
Hi Guys, do you still need to Code/program the New/other BCM module ?
Thanks
This is very helpful but on the BMW F15 X5 where is the body domain control located? As it’s not on the driver footwell?
Good video but you miss a step in your explication and it's a very important step. Im talking about the back connecter at end of the video. Every step is perfect but i had to find this information in other chanel. But over all it help me a lot utile i got to this part.
He talk about pulling the back clip to the right. That is acually true but before to do that you need to pull the modul out of his trey and twist it a little bit so you can slide the clip up inted of just saying to pull the clip to the right.
Thank you! This was what I needed to know.
Hey I’m having trouble with a 2006 330 I and I replace the body computer and the cluster and I need it program do you guys program
I have 2006 bmw 325i I'm having a issue with car not doing nothing wen I insert key dash stays black car don't turn on I have interior lights also unlock and lock buttons work I checked all fuses and replaced relay in dash
if I take a used bcm (same part number) after installation, do not have to program anything?
Hello. Did you figure it out? Thank you G
i have a 2007 530xi wagon everything lights up to start but the starter just clicks twice,,,Code DTC U112B Lost Communications with Instrument Pack Status (SIG) ...Do you think it is the BCM? thanks! iF YES IS IT LOCATED in the same spot as this video remember it is a wagon?
Hey, could you explain fault code with I get 50 MRS power supply for bmw e83? I have airbag light on dash but can’t find info. Would think that I need to change steering spring but not sure if you could explain would be awesomely.
Thank you
I've seen a video on RUclips saying the electronic control module situated behind the glovebox is responsible for auxiliary coolant pump, glowplug module and thermostat? These parts are throwing me fault codes and I'm wondering could it be the module before I change the rest. The auxiliary pump is working when tested on the bench? Thanks
Hello brother, without programming in the device when replacing
Hi !! I have a e 64 630i it cracks , but will not start (sometimes it starts fore ONE SECOND... ) I exedently put 12VOLT on the CANBUS wire (red/blue+red) sow i cheqed all the relais and fuses they al work.. i messurd the ohm on the canbus and it has onley 20ohm and on the computer unplugged 45ohm ... What doe you think please thank you !!
I have a 08 328xi just changed the ecu and the cas with key and ignition still no start. Crank but no start. Bruce Brantley
Hi bro, what all systems are controlled by BCM in x3 F25 N47.
Hi i have to replace my BCM modul it's ok if replace with one from a same car same engine code? or its have to be programmed?
It's can burn out something if i only replace with another one?
amazingly helpful thank you
Hello ..i just wan to ask if i buy ecu set with bmc module and key an i wan to fit in my car do i need to reprogram or not ?
my bmw e91 2006 central lock wipers and electric window problem some time work some time not work please help what can i do ?
Can you tell me where the convertible top module on a 2012 328i is located
I have a problem with transmission with bmw e90 320i gearbox emergency i can’t drive i have changed the automatic oil and the filter but the same thing is the problem there at this part what u have changed please help me
Seems the question regarding whether you need to code the replacement module or not is still pending. Anyone knows? I have no power to the AC blower and the fuse is fine. I'm suspecting something is wrong in that junction box. Thanks in advance.
Hi,
My central locking has stopped working on my car. When I press it to unlock it opens all of the locks, but it does not lock all of the doors when I press the locking button either on the key fob or the inside of the car, it only locks the driver door. Any advice? BMWe87 120d 2005
did u fix?
Good day i have a bmw 1 series 120i
Car has no spark
No pulse
No power on plug that goes in the valve tronic
And no power on the crank sensor plug
What could be the problem
Hy i have a problem with bmw e91 320d 2005 when a turn up the fog light and push the brake dont show the brake in the right if i turn off the fog light the brake work ?
Hi my car died on me there was nothing wrong with it and it just blacked out any suggestions what’s the problem is
Will this help with the u110f code i am getting and transmission malfunction?
I have a faulty PDC… in BMW e64 convertible, changed sensors and wires straight from BMW but there is no sound nor these sensors work…. WHAT CAN I DO??
Hello, Do Juction box needs to be coded to the car when you take it from another car?
I'm wondering the same? did you figure it out?
Where do I find all the module in ABM W328I 2014? Can you l
where is the location of the transmission ecu of E90 is it in the same place?
Do you have to programming the module?????
Yep you must program it again Before start engine
But the control knob does not work
I need to replace my module in my E93 convertible is this true so that I can get the roof to close with my key
2011 328i no start no crank no fire to the white wire and fuel panel under hood
Do you know what a U1100 code is I replaced my transmission and this code came up
I also have same problem can I ask did u come right
Where can I buy this part and what is the name if you could answer me thanks in advance?
My fuel gauge, central locking ( the indicators flash and the car powers off but the actuators don't lock), air conditioning(cooling) and wipers do not work (wipers turn on and stop on the middle of the screen), The only code I get is a 5E5B DSC button code and A738 JBE power supply interrupted code. Everything else works. Is it a FRM or the JBE that is faulty?
Hi, did you manage to diagnose the issue? I have similar issues with mine especially the wipers
I am French I want to know if the module is used for the light rings of the front headlights thank you
No you want FRM
No you want FRM
Bmw f10 5series zgw replacement any programming required
Used gateway module
Where the hell is the Transmission control module located on a bmw 335i 2007? I have looked absolutely everywhere and its like the TCM doesn't exist in a BMW 335i. Is it called something different? My cars code keeps reading back to my TCM but the TCM is impossible to locate.
Where's fuel control module in 320i 2005 module, mean location?
Do you know where the transmission control module is located.
On the joistyck
Having issues w/ what i suspect is a bad bcm... hooked the icom ... like 20modules down except for 1 green... 20 red ... its a '07 335i bmw
Did you fix it?
Thank you 🙏
can i replace a JBE with a used one from Ebay?? or does it have to be new from BMW?
Hi mate,you must reprogram your New jbe box before start engine as it will not work and must bring some new issues as it will not be recognised by your car system
You can appreciate why cars cost what they do when you see all the component parts behind various panels
I have the 2005 BMW 645CI. Can anyone tell me where the Dynamic drive control module is located? Thank you for all your help.
I don't understand. I still don't know where the Dynamic drive control module is located. Please help me.
seriously BMW need to have a recall with this I already took the car literally 5 times at the dealership in the past couple years with the e92. it's literally a money pit it's awesome and drive but it spends more time at car shop then being on the road 😮😭😠😡 I'm really tired of this car!!! Time to sell or drop it off the wrecking yard. BMW build quality with electronics and longevity isn't what it use to be like in the 80s&90s
Buenos días tengo un problema con mi Bmw e60 series 5 530i 2006 no funciona nada de el tablero limpiaparabrisas el radio y la luz de alante
Do you happen to know someone who can do board repair? I have an ATM part of a NBT Evo navigation system from a M4 that needs fixing. Thanks!
I want to see or some instructions how to plug BCM on the back side of it. It's a trick
No need to programing?
Remove the complete glove box with that bar and hinge and will have more room to work
Where is the rear differential computer module?
Dang.. Sounded like a tornado outside!
Cual es el relay de cierre centralizado por fabor ayudame
I have a 2005 BMW 645ci, I keep getting the Anti Trap Malfunction Light. I know how to reset it, and keep having to reset it all the time, the only strange thing is as long as the engine is running or the key is in the accessory position the windows are fine. ( up or down positions ) but if I shut the door the system fails to remember to roll up the window, and sometimes forgets to drop the window if I open the door. The latest issue is if I drop the top the driver's window won't go up all the way ( does it sometimes ) It will go up till it hits the seal the drops back down. Like I mention before It doesn't forget if I have the engine running or the key in the first position. Wondering if it's the BCM or power going to a specific module that supplies power to whatever controls the ANTI TRAP. Thanks, Guys!
Need help locating my PDC module. 2012 E93 it’s not under trunk mate or above battery
CAn I call you about my e90 electric issue. Too long to make a comment
You are not giving the instructions well and that can make it break because you have to remove the glove box
They just charged me 1600$ at a shop for this. Fuckin BS
such a rubbish and ass trash engineering bmw . why no a simple wire from battery to the light with fuse ??? the same reason german lost the war. rubbish engineering
BMWs has become worst than French cars....
I have an 06 bmw 330i, i replaced both primary and secondary fuel pumps and i still dont get any fuel pressure i checked the fuse, the fuse is good. What could the issue be? Mind you theres no fuel or any type of pressure coming out when i disconnect fuel line
My daughter’s BMW 328 XI is cranking but not attempting to start at all. The battery has a good charge by the way. Any ideas? Thank you!
Hello brother, without programming in the device when replacing
Hey, i have 5088 fault code on my bmw e60, what can the problem be?