Please Read: One side of the table runner will have 3 peaks and the other side will have 2, this is completely normal due to the zigzag construction, you're not doing anything wrong and this cannot be fixed.
hello thank you for sharing !!! 💖💖💖 Wow so many ways to crochet for different seasons and in so many colors!!! 👏👏👏👏I can't wait now I will get started 👍👍👍
Omg this is so beautiful...I'm waiting for my yarn and then I'm gonna make it for my mom..she is gonna love it..thanku so much for this amazing pattern..
This is beautiful! Thank you so very much for this tutorial. By the way for Chevron patterns my grandmother and I referred to the "up/down" as peeks and valleys. 😊
Love it!! 😍😍 Thank you so much!! I’m going to try to do this and have an autumn 🍂 runner. I take a while crocheting 🧶 so I hope I’ll have it by September. Gracias!!! 😄🙏❤️
Hello, I watched this one too! You asked what the points are called. In crocheting I here them called hills when they point up and valleys when they point down. Love this pattern too! Thank You.
Is there any way you could do a video to show us how to do this? Because she should have gone a few rows with everybody so we knew how to end and begin it. I have ripped my workout four times now.. I love the design and would like to make this but I don't know if I really want to start this all over again unless there's a new video/tutorial on the beginning and also at the end. Please help!! 🥴🤔🤨
aaaa the amount of times i have frogged this project since last night is fucking embarrassing kjrgnkjreg- i think showing us how to do another row might have greatly helped me but ah well...the only thing that made sure i didnt lose my sanity was the graphic diagram i saw on your website haha so thank you for that ^^ overall it is a wonderful tutorial and i absolutely love your energy
Please tell me how you end this 😊 as I’m not understanding how you get to the end doing the repeat row overs and over it won’t have any points ! Thank You
NEW PATTERN FOR 2x bigger Chain 72 do 4 clusters normally. The 5th cluster should be 3DC, CH3, 3DC Finish your 11th cluster and skip 5 chains then go into the 12th cluster. on your 18th cluster you should 3DC, CH3, 3DC then finish off with 4 more normal clusters. You should have 1 more chain left (slip stitch doesn't count.) One DC in that last stitch and chain 3.
ROW 2 After Chain 3 skip the space below the chain 3. Start in the next space and do cluster. 3DC, CH3, 3DC in the same spaces as row 1 ⚠⚠⚠REPLY FOR ANY QUESTIONS!!⚠⚠⚠
Hello! I'm still very new to calculating crochet patterns and i want to ask, what does the chain at the very start affect? And if i want to make the width of the table runner bigger how do i do that? Thank you for the tutorial :)
The foundation chain will determine the width of your project. To make it wider you need to make a chain that is multiple of 18. For more specific details please refer to the pattern on my blog as I don’t remember every single detail of the patterns ☺️ I hope this helps
NEW PATTERN FOR 2x bigger Chain 72 do 4 clusters normally. The 5th cluster should be 3DC, CH3, 3DC Finish your 11th cluster and skip 5 chains then go into the 12th cluster. on your 18th cluster you should 3DC, CH3, 3DC then finish off with 4 more normal clusters. You should have 1 more chain left (slip stitch doesn't count.) One DC in that last stitch and chain 3.
ROW 2 After Chain 3 skip the space below the chain 3. Start in the next space and do cluster. 3DC, CH3, 3DC in the same spaces as row 1 EDIT: For 3rd row, do not skip the space below the 3 chains ⚠⚠⚠REPLY FOR ANY QUESTIONS!!⚠⚠⚠
I love the look of this! But my OCD is getting to me about having 3 points at 1 end and 2 at the other end. I know the chevron pattern makes it do that but I'd like it to be the same. Ideas?
Yeah I'm halfway through it before I realized that there's going to be 3 on the starting end and 2 on the other... it's really bugging me and as a beginner I'm sitting here trying to figure out how I can fix this without having to frog it all and start over. I wouldn't even know how many stitches to do at the beginning to end up with 3... kind of frustrating, but oh well I guess.
This is so pretty!!! I will make this for my mom. But may I ask what's the width of this table runner? So I may know if I need adjustments thank you ^^
Hi, I love this pattern! Thank you! @CJDesignblog do you add 35 chains, or is it 36? I am a bit confused if the slip knot counts as a chain and we add whatever number (in this case, 35) to that initial 1. Or does the 36 because as the first chain after the slipknot? Thank you!
Hi is that the 36 chain tutorial?because I try making it and it ended too short like an 18 so can you please state if this tutorial is the 36 chain? Because I want to make the 36 chain one.Thank you.😁
Where do I start the 3rd row??? I turned my work over but when I start crocheting I’m crocheting on the outside of the piece? Also it just gets wider. I’m excited to do this but I’m a bit confused.
go to the second gap. It took me awhile to get it. So basically when you chain 3, skip to the second gap you see with the clusters from the previous row.
she chained 36 in this video. so keep adding 18 when you want to make it bigger and bigger. I have a pattern for twice the size that i can tell you rn. So to get your desired width just put your chained row against the width of your table and increase 18 if you feel its too small for your table. For length, just keep doing the same pattern for each row until you get the length you are happy with that reaches across your table.
Too bad there's no instructions anywhere on how to create the points on both ends!!!! Folks, save yourself the time and frustration. Whatever this game is here, I ain't playing it!!
Hello, If I wanted to make it bigger, such as 54, would I need to increase by another two clusters on each side of the "peeks"? Thank you for this lovely pattern. I am making it as I type. But I would also like to make one bigger.
NEW PATTERN FOR 2x bigger Chain 72 do 4 clusters normally. The 5th cluster should be 3DC, CH3, 3DC Finish your 11th cluster and skip 5 chains then go into the 12th cluster. on your 18th cluster you should 3DC, CH3, 3DC then finish off with 4 more normal clusters. You should have 1 more chain left (slip stitch doesnt count.) One DC in that last stitch and chain 3.
ROW 2 After Chain 3 skip the space below the chain 3. Start in the next space and do cluster 3DC, CH3, 3DC in the same spaces as row 1
Please Read: One side of the table runner will have 3 peaks and the other side will have 2, this is completely normal due to the zigzag construction, you're not doing anything wrong and this cannot be fixed.
I tried this and it turned out beautiful
hi! around how much time did it take to complete the project?
just what I need! it's a life saver when I need a simple yet beatiful thing for a gift 😍 thank you ❤
hello thank you for sharing !!! 💖💖💖 Wow so many ways to crochet for different seasons and in so many colors!!! 👏👏👏👏I can't wait now I will get started 👍👍👍
Omg this is so beautiful...I'm waiting for my yarn and then I'm gonna make it for my mom..she is gonna love it..thanku so much for this amazing pattern..
So pretty. Can't wait to try it.
That’s a beautiful table runner I’m going to give it a try it looks very beautiful❤❤❤❤
Wow i am so glad i read the comments before trying this. Sounds like ALOT of confusion.
This is beautiful! Thank you so very much for this tutorial. By the way for Chevron patterns my grandmother and I referred to the "up/down" as peeks and valleys. 😊
Love it!! 😍😍 Thank you so much!! I’m going to try to do this and have an autumn 🍂 runner. I take a while crocheting 🧶 so I hope I’ll have it by September. Gracias!!! 😄🙏❤️
This is just so pretty.I want to try it.
I just finished mine last night. Thank you.
Beautiful Pattern and nice & easy. Thank you 🙂
I'm going to this out! Looks so good!
So sweetly explained. Thank you. I will definitely make this.
This is a lovely stitch pattern. Thank you. ❤
Beautiful. Will try it for sure ❤️
Incredibly easy to follow! Thank you ❤
Glad it was helpful!
This is so beautiful guys.
This is beautiful!
Hello,
I watched this one too!
You asked what the points are called.
In crocheting I here them called hills when they point up and valleys when they point down. Love this pattern too!
Thank You.
Beautiful I’m gonna try this thank you so much
This is just beautiful! Love your channel and a new subscriber
love this pattern!!
been looking for an an easy pattern.... this is it.. thank you.. CHRISTMAS GIFTS...
easy to follow.thanks for sharing☺️
Omg this is so beautiful I loved making this and can't wait to gift to my sister. Thank you so much for sharing ❤❤❤❤❤❤
Is there any way you could do a video to show us how to do this? Because she should have gone a few rows with everybody so we knew how to end and begin it. I have ripped my workout four times now.. I love the design and would like to make this but I don't know if I really want to start this all over again unless there's a new video/tutorial on the beginning and also at the end. Please help!! 🥴🤔🤨
Love this!
Love it!!!
Splendid work
Yes i enjoy and very beautiful...
It's beautiful
This genuenly seems so much easier than it looks, I'm gonna try to make one quite soon and I'll probably give it to my mom for Christmas
Wonderful work dear ❤❤❤❤
This would be a lovely scarf, too.
Nice shearing ❣👌
This is so nice. Thank you. I’m crocheting it right now!
aaaa the amount of times i have frogged this project since last night is fucking embarrassing kjrgnkjreg- i think showing us how to do another row might have greatly helped me but ah well...the only thing that made sure i didnt lose my sanity was the graphic diagram i saw on your website haha so thank you for that ^^ overall it is a wonderful tutorial and i absolutely love your energy
How did you start the 3rd row??? I'm so lost
Thank you for a lovely pattern. I have already started to make one. 🤩🤩😘😘
Yay! ☺️
Thank you so much!!
This is so cute..
Do have a video of using crochet thread. At this time i love the thread.
Thank you
Janet Mills in Uvalde Tx.
Nice...i like...👍👍
Thank you 😊
Will be my next project
Thank you
Hi ... love this ... perfect for my dinning table.
Can you please tell me what Ply this cotton is .. eg: 4ply / 8ply
Thank you ... 🌸🇦🇺
Thank you so much! New subscriber here!
Yay! Welcome! ☺️
great
It’s called the Valley Inn peak
Lovely, how long did it take?
Please state the lengtĥ of your runner so that we get an idea of how yarn we will need to make a longer runner. Thank you for the beautiful design
Please tell me how you end this 😊 as I’m not understanding how you get to the end doing the repeat row overs and over it won’t have any points ! Thank You
But what happens with the 3rd row? Do I do a cluster in the in the gap below the ch 3 start or go into the 2nd gap along pls.
go to the second gap. It took me awhile to get it
NEW PATTERN FOR 2x bigger
Chain 72
do 4 clusters normally.
The 5th cluster should be 3DC, CH3, 3DC
Finish your 11th cluster and skip 5 chains then go into the 12th cluster.
on your 18th cluster you should 3DC, CH3, 3DC
then finish off with 4 more normal clusters.
You should have 1 more chain left (slip stitch doesn't count.)
One DC in that last stitch and chain 3.
ROW 2
After Chain 3 skip the space below the chain 3.
Start in the next space and do cluster.
3DC, CH3, 3DC in the same spaces as row 1
⚠⚠⚠REPLY FOR ANY QUESTIONS!!⚠⚠⚠
How many chains did you start with? Is it 18 or 36? Little confusing
Hello! I'm still very new to calculating crochet patterns and i want to ask, what does the chain at the very start affect? And if i want to make the width of the table runner bigger how do i do that? Thank you for the tutorial :)
The foundation chain will determine the width of your project. To make it wider you need to make a chain that is multiple of 18. For more specific details please refer to the pattern on my blog as I don’t remember every single detail of the patterns ☺️ I hope this helps
@@CJDesignblog where to check your blog?tnx.
NEW PATTERN FOR 2x bigger
Chain 72
do 4 clusters normally.
The 5th cluster should be 3DC, CH3, 3DC
Finish your 11th cluster and skip 5 chains then go into the 12th cluster.
on your 18th cluster you should 3DC, CH3, 3DC
then finish off with 4 more normal clusters.
You should have 1 more chain left (slip stitch doesn't count.)
One DC in that last stitch and chain 3.
ROW 2
After Chain 3 skip the space below the chain 3.
Start in the next space and do cluster.
3DC, CH3, 3DC in the same spaces as row 1
EDIT: For 3rd row, do not skip the space below the 3 chains
⚠⚠⚠REPLY FOR ANY QUESTIONS!!⚠⚠⚠
The shape you’re making is called a chevron. 😛🥰 cheers!!
They’re called valleys and peaks!!
I love the look of this! But my OCD is getting to me about having 3 points at 1 end and 2 at the other end. I know the chevron pattern makes it do that but I'd like it to be the same. Ideas?
Increasing the number of sts ☺️
Increase to how many for 3 points on each end? Can you tell us?
Yeah I'm halfway through it before I realized that there's going to be 3 on the starting end and 2 on the other... it's really bugging me and as a beginner I'm sitting here trying to figure out how I can fix this without having to frog it all and start over.
I wouldn't even know how many stitches to do at the beginning to end up with 3... kind of frustrating, but oh well I guess.
This is so pretty!!! I will make this for my mom. But may I ask what's the width of this table runner? So I may know if I need adjustments thank you ^^
I'm glad you liked it! The measurements are on my blog, link in the description of this video :)
Hi, I love this pattern! Thank you! @CJDesignblog do you add 35 chains, or is it 36? I am a bit confused if the slip knot counts as a chain and we add whatever number (in this case, 35) to that initial 1. Or does the 36 because as the first chain after the slipknot? Thank you!
No the last chain shouldnt be used. There should be 36 chains
Thank you!@@Mianna.
just to be precise, do not crochet in the slip knot, crochet in the chain above/next to the slip knot@@tori2830
Thank you so much! I used this and just completed the project. it looks great! Thank you@@Mianna.
Please let me know the length of your project. Accordingly I will buy yarn as much as ì need for it. Please reply
Two valleys on one end and two peaks on another.
How do you adjust for 54 chains instead of 36?
Hi, some people call them peaks and valleys
Hi is that the 36 chain tutorial?because I try making it and it ended too short like an 18 so can you please state if this tutorial is the 36 chain? Because I want to make the 36 chain one.Thank you.😁
This happened to me too!
So how do i do the point when i finish the length
how many chains are there?
Where can I see her blog about this pattern 🤔. Can anyone help me PLEASE.
Www.cjdesignblog.com
How did you do the end part?
Yes i am confused, do i try to do it how it started🤔
I’m confused also as I just started and it doesn’t look like hers …. HOW DO WE END THE PATTERN…Please
Cut the yarn attached to the rolled yarn.
slip stich into the last space and pull through the yarn that is cut.
tighten. @@colleencovey322
I’m going to make this for my dining table what is the name of that book .
A Man at Arms by Steven Pressfield
I think not sure ..peaks and valley's is what its called..not sure though..
Where do I start the 3rd row??? I turned my work over but when I start crocheting I’m crocheting on the outside of the piece? Also it just gets wider. I’m excited to do this but I’m a bit confused.
go to the second gap. It took me awhile to get it. So basically when you chain 3, skip to the second gap you see with the clusters from the previous row.
I can send you pictures if you would like me to show you a quick version
@Mianna could you send pictures to me please
@@sharonprice9841 Yess but i have to make another one and note down my progess. I gave my one to my auntie..
@@Mianna. ok thank you
You really need to do another row to show how to proceed without it getting longer instead of wider!!
Where can I get pattern to print for this table runner?
There’s no printable pattern available for this pattern. The only option is the free pattern on my website
Why do you have two string and 3 string at the ends? I mean why not equal?
That’s just how the pattern is..
I want to make this but the ends don't match... how do I get it to match...?
Add 18 more chains at the beginning 😊
@@CJDesignblog thank you so much!!!
@@jaidedugger5634 did adding the 18 additional stitches at the beginning make it match?
i tried adding 18 more but it didnt turn out symmetrical
Safe your hands
Three fringes on one side but two on the other. Should be the same.
Nope, that’s how the pattern is :)
Did u chain 36 to start
yes its small though. I can tell you a pattern twice that size
I checked your blog and didn't see the sizes 😕
yea there isn't but I can give you a pattern of this that's twice her piece.
Why does one side have two fridges and the other side have 3
Puede hablar en castellano porque no le entiendo nada yi soy prinsipiante en croche por fabor graciad
Hello, how many will I make a chain ⛓ for my table length 60 inches and width 36 inches.?tnx.
she chained 36 in this video. so keep adding 18 when you want to make it bigger and bigger. I have a pattern for twice the size that i can tell you rn.
So to get your desired width just put your chained row against the width of your table and increase 18 if you feel its too small for your table.
For length, just keep doing the same pattern for each row until you get the length you are happy with that reaches across your table.
Why one side has two and the other three
Yeah, I noticed that.
its supposed to be like that, to make it unique in some way.
I can't understand what you do at the endof runner...i m beginner so i can not understand your end work🙄
Perisotero ple jimo
Ma i due lati non combaciano, da una parte hai 2 frange e dall'altra 3!!!!!
it seems like the written and video pattern don't match :(
Correct,I attempt,output is not correct
My Cat wouldnt let me Crochet in peace😭
Too bad there's no instructions anywhere on how to create the points on both ends!!!! Folks, save yourself the time and frustration. Whatever this game is here, I ain't playing it!!
🫶🏼
Hello, If I wanted to make it bigger, such as 54, would I need to increase by another two clusters on each side of the "peeks"? Thank you for this lovely pattern. I am making it as I type. But I would also like to make one bigger.
Thanks. Very helpful❤
NEW PATTERN FOR 2x bigger
Chain 72
do 4 clusters normally.
The 5th cluster should be 3DC, CH3, 3DC
Finish your 11th cluster and skip 5 chains then go into the 12th cluster.
on your 18th cluster you should 3DC, CH3, 3DC
then finish off with 4 more normal clusters.
You should have 1 more chain left (slip stitch doesnt count.)
One DC in that last stitch and chain 3.
ROW 2
After Chain 3 skip the space below the chain 3.
Start in the next space and do cluster
3DC, CH3, 3DC in the same spaces as row 1