Finding folks like you to work on their car is a rare deal nowadays. You take your time to do the job right where others blaze through the job and damage the car or have leaks.
Alfredo you are the only one who explain perfectly how to change a Windshield thank you so much. it help me a lot. great job men👍👍, unfortunately you live too far otherwise i go by you to replacement my windshield of my BMW 335i
I live just over the border in British Columbia it gets cold here my brother owns a Glass shop has had it for over 35 years i've helped out over the years but now doing it full time. I must say you are a perfectionist. like watching your videos.
Hey bro just wanted to let you know that here in Toronto Canada we named a tool after you bcz we discovered it in one of your videos and now everyone uses it , it’s the urethane scraper we call it the Alfredo lol
Excellent video, very informative and very well done. I just took my BMW 328i into the dealer to have the glass replaced, I plan to pick it up tomorrow. I just hope they do as well as you did, if I would have lived close to you I would have definitely brought my business to your shop.
Thanks, great video and thorough explanation. I did remove the windshield from the donor vehicle and installed it onto mine. Not a hard job to do, but a LOT of patience required. The most difficult job for me was to apply the new top molding onto the windshield before gluing :)
Hey mate just an option in regards to the cowling, ive started to take the hard plate section off as well.so that when you put the cowling on you dont have to worry about it sliding into the right spot because you can put the pinch weld mould on with ease once the cowling is in place. It may take a minute or two more to take the extra plate off and side plastic covers off but itll make putting the cowling on less painful. Hope this helps other fitters.
Thanks for a great video. I am on the East coast otherwise I would bring my X5 over to you to replace the rear glass. I have watched all your videos and great tips for me to do it. I already prepped 80% of the work already on the pinch weld area. Waiting for BMW to ship me the glass and the BMW adhesive kit. I do have a question on the pinch weld. I already shaved the old urethane down to a thin ~1mm thickness. Some area I removed too much and I see the factory paint surface. Can I apply BetaPrime on the bare paint surface. The rear is relatively easier then the front plus I can use the wiper shaft hole has alignment assistance plus BMW has depth bumpers. Thanks for all the great videos and I really like how you keep your shop so neat.
excellent demonstration ,, i didn't know how they did it but 2 question ,, would it be as perfect as the factory one as for the sealing and instalation and what about the windshield u removed?,,, it seemed ok
what if my condensation sensor isn't sticky anymore what adhesive do you recommend? thanks for the video and remembering to praise god may he guide us all to the str8 path
Very nice and clean job using old school tools to keep the job clean god bless you if you’re in Michigan let me know or if you have friend works in glass
just wondering if the hood as to be left open on this install. Also wondering if this is similar to the 05 545i? thank you and you are awesome at what you do. Im always learning from you. Great work Alfredo!
When setting the glass yes you definitely want to have the hood open. It gives you a better clearance. Thank you for taking the time to watch my video.
Brother I just bought a bmw 335i and the guy before me put black adhesive glue under the windshield so the trim doesn't seat perfectly the bottom like that and the top. So I've been scrapping like crazy taking the adhesive out. I don't know what else to do, any ideas to clean those areas would help. I bought it's cheap now, restoring car to it's former glory
If I saw correctly, you used the DOW Express BP urethane. I've owned my auto glass shop for 5 years now. I do all the installs personally with one employee. When I prime the glass, I use the included frit primers in the kit as I was told by DOW, you have to use them with the express BP....yet you didn't use it. Are you saying you don't need to use the green frit primer sticks with the express BP????? Thanks. Great video by the way.
I also use the green glass primer but on this video I used the 5504g all in one primer that could be applied on the glass as well. The difference is the flash time. The green primer takes 6 minutes to flash vs the 5504G only takes 2 minutes. Since I was trying to save some time I used the 5504G. Thank you for taking the time to watch my video.
Hi excellent video. I had my windshield replaced recently, same car as in this video. I am wondering if the moulding or sealing strip that goes on the bottom length of the glass and the cowl attaches to can be replaced without removing the glass? The one they used is about 16" too short so my cowl is loose on the ends now. As well as my rain sensor not working.
hockeymike12 sorry to hear this. Unfortunately the bottom molding gets glued in when we are setting the glass in to the glue. You might get away by removing the cowling and adding urethane to the bottom molding let it dry then reinstall the cowling. The rain sensor try reinstalling it.
Alfredo if you are able to make a short video on how to re-glue the condensation sensor i bet it would get a lot of views everybody asks the same question i been looking for a video on this issue for so long the question is what adhesive to use and how to apply properly so it doesn't interfere with the sensor it if you can show us that would be great thanks
Thank you, I been ask from my followers if I could do a video using the cold knife and the Express(Ambush) tool to remove the glass, with out creating body damage so I pick this car to demonstrate a safe quality installation using different tools. This cut out could definitely be done with a wire or fiber line cut out System.
I. curious why no primer was used on eurethane of body and just glass only. this in Europe is poor practice. as u know the primer is am activater for the glue. no primer the glue will eventually break down from the body causing all sorts of problems.
Rodney Porter. I see you are not familiar with DOW AUTOMOTIVE products. Best bonding chain is rubber to rubber, freshly cut Urethane is porous so it allows the molecules to bond better with less coats of chemicals in between.
Alfredo's Auto Glass Repair Corona yes we use Dow products last 15yra or so.we have down many test in Europe with primers on glass ,no glass ,primers on body and no body. we have done loads of tests witch all available on auto glass website. where we have done front end smashes with front air bags going off. and the ones witch have not been primed have been the most dangerous. if u didn't prime glass or body in the best of belron world wide competition. u would fail that job. as u know. don't think I'm being a smart ass. as u are a really good fitter.ive been fitting for the biggest company in the world over 30yrs.witch do massive checks with all Dow products. and If I never put primer on. it would be instant dismissal.i would be more than happy to send u the gruesome carnage vids.what no primer does to glass and body does.
Hi, do you know what the Sound insulation f apron is (OE code for e46 51488238934 or no. 5 in this diagram www.realoem.com/bmw/enUS/showparts?id=AP71-EUR-10-2004-E46-BMW-320d&diagId=51_3823)? Does it need to be replaced together with the windshield?
Развлечения
Finding folks like you to work on their car is a rare deal nowadays. You take your time to do the job right where others blaze through the job and damage the car or have leaks.
Stripping my car down to wrap at the moment, finding videos like this explaining how to take every little trim off is invaluable! Thank you so much!
Ben Mckinstry Thank you for watching!!!
Alfredo you are the only one who explain perfectly how to change a Windshield thank you so much. it help me a lot. great job men👍👍, unfortunately you live too far otherwise i go by you to replacement my windshield of my BMW 335i
I live just over the border in British Columbia it gets cold here my brother owns a Glass shop has had it for over 35 years i've helped out over the years but now doing it full time. I must say you are a perfectionist. like watching your videos.
Thank you.
Hey bro just wanted to let you know that here in Toronto Canada we named a tool after you bcz we discovered it in one of your videos and now everyone uses it , it’s the urethane scraper we call it the Alfredo lol
What a nice job. I can only hope that my dealership here in germany will pay as much attention to detail as you did.
What a great family. Teaching a kid to be a professional, young man
Hit Me thank you 🙏
Excellent video, very informative and very well done. I just took my BMW 328i into the dealer to have the glass replaced, I plan to pick it up tomorrow. I just hope they do as well as you did, if I would have lived close to you I would have definitely brought my business to your shop.
Thank you. I hope everything went well.
Kevin Numbers how much was it
how much did the dealer charge you and how long did they take?
Thanks, great video and thorough explanation. I did remove the windshield from the donor vehicle and installed it onto mine. Not a hard job to do, but a LOT of patience required. The most difficult job for me was to apply the new top molding onto the windshield before gluing :)
Nice video Alfredo, thank you for taking the time to make it. A very professional job.
Great family company!!!! Love watching these videos!!! Keep up the great work!!!
Mackdaddy F thank you 😊
@@AlfredosAutoGlassRepairCorona hope you guys are doing great!! I love family businesses!
Hey mate just an option in regards to the cowling, ive started to take the hard plate section off as well.so that when you put the cowling on you dont have to worry about it sliding into the right spot because you can put the pinch weld mould on with ease once the cowling is in place. It may take a minute or two more to take the extra plate off and side plastic covers off but itll make putting the cowling on less painful. Hope this helps other fitters.
lpa arcz thank you mate!
excellent job..very professional...salute to you bro..
Thanks for a great video. I am on the East coast otherwise I would bring my X5 over to you to replace the rear glass. I have watched all your videos and great tips for me to do it. I already prepped 80% of the work already on the pinch weld area. Waiting for BMW to ship me the glass and the BMW adhesive kit. I do have a question on the pinch weld. I already shaved the old urethane down to a thin ~1mm thickness. Some area I removed too much and I see the factory paint surface. Can I apply BetaPrime on the bare paint surface. The rear is relatively easier then the front plus I can use the wiper shaft hole has alignment assistance plus BMW has depth bumpers. Thanks for all the great videos and I really like how you keep your shop so neat.
Very nice video, very very nice family 🙂
This guys patients is incredible. I would of taken a blade to it 10 minutes ago and cover it with primer lol.
excellent demonstration ,, i didn't know how they did it
but 2 question ,, would it be as perfect as the factory one as for the sealing and instalation
and what about the windshield u removed?,,, it seemed ok
Can the lower molding strip (that clips on) be replaced from the windshield WITHOUT having to take off/ replace the ENTIRE windshield?
Man awesome work
what if my condensation sensor isn't sticky anymore what adhesive do you recommend? thanks for the video and remembering to praise god may he guide us all to the str8 path
Very nice and clean job using old school tools to keep the job clean god bless you if you’re in Michigan let me know or if you have friend works in glass
great job!!
just wondering if the hood as to be left open on this install. Also wondering if this is similar to the 05 545i? thank you and you are awesome at what you do. Im always learning from you. Great work Alfredo!
When setting the glass yes you definitely want to have the hood open. It gives you a better clearance. Thank you for taking the time to watch my video.
Brother I just bought a bmw 335i and the guy before me put black adhesive glue under the windshield so the trim doesn't seat perfectly the bottom like that and the top. So I've been scrapping like crazy taking the adhesive out. I don't know what else to do, any ideas to clean those areas would help. I bought it's cheap now, restoring car to it's former glory
Is all this the same for a 2011 BMW 328i sedan and if so do you know where I can get the drip molding clips and what the part number of them would be?
Very fine job
Do removing windscreens can be used monofilament
Hey, how much to do this job on the exact same car? I need mine replaced
If I saw correctly, you used the DOW Express BP urethane. I've owned my auto glass shop for 5 years now. I do all the installs personally with one employee. When I prime the glass, I use the included frit primers in the kit as I was told by DOW, you have to use them with the express BP....yet you didn't use it. Are you saying you don't need to use the green frit primer sticks with the express BP????? Thanks. Great video by the way.
I also use the green glass primer but on this video I used the 5504g all in one primer that could be applied on the glass as well. The difference is the flash time. The green primer takes 6 minutes to flash vs the 5504G only takes 2 minutes. Since I was trying to save some time I used the 5504G. Thank you for taking the time to watch my video.
Thank you 👍
Clean, tidy and methodical. Great job & God bless you too!
Jordan Pene thank you 😊
Hi excellent video. I had my windshield replaced recently, same car as in this video. I am wondering if the moulding or sealing strip that goes on the bottom length of the glass and the cowl attaches to can be replaced without removing the glass? The one they used is about 16" too short so my cowl is loose on the ends now. As well as my rain sensor not working.
hockeymike12 sorry to hear this. Unfortunately the bottom molding gets glued in when we are setting the glass in to the glue. You might get away by removing the cowling and adding urethane to the bottom molding let it dry then reinstall the cowling. The rain sensor try reinstalling it.
@@AlfredosAutoGlassRepairCorona Oh man... was hoping I could just fix it myself. Guess I will leave it up to the insurance company. Thank you!
视频拍的不错兄弟 ，您 只要17.68美元即可通过亚马逊买到这款宝马E90 E91发动机用前挡风密封胶条
Alfredo if you are able to make a short video on how to re-glue the condensation sensor i bet it would get a lot of views everybody asks the same question i been looking for a video on this issue for so long the question is what adhesive to use and how to apply properly so it doesn't interfere with the sensor it if you can show us that would be great thanks
nice work just curious how come you don't use the WRD spider to remove the windshield on this BMW . Was that spider didn't work well?
Thank you, I been ask from my followers if I could do a video using the cold knife and the Express(Ambush) tool to remove the glass, with out creating body damage so I pick this car to demonstrate a safe quality installation using different tools. This cut out could definitely be done with a wire or fiber line cut out System.
people told me the fiber line not that good is it true.
Any jobs going with you? I am a glazing tech from the uk and looking to relocate very experienced and love me job
There’s a metal bar below the E90 windshield under the cowl. What is that?
It's there to support the steering console.
Добрый день.
Подскажите пожалуйста цену на WRD-Spider 002S - Kit 300 K у вас а то у нас цена 800 $ спасибо
Hey guys , where to buy windshield replacement glass wholesale ,after I take old glass off.thanks
👍👍👍👍
I. curious why no primer was used on eurethane of body and just glass only. this in Europe is poor practice. as u know the primer is am activater for the glue. no primer the glue will eventually break down from the body causing all sorts of problems.
Rodney Porter. I see you are not familiar with DOW AUTOMOTIVE products. Best bonding chain is rubber to rubber, freshly cut Urethane is porous so it allows the molecules to bond better with less coats of chemicals in between.
Alfredo's Auto Glass Repair Corona yes we use Dow products last 15yra or so.we have down many test in Europe with primers on glass ,no glass ,primers on body and no body. we have done loads of tests witch all available on auto glass website. where we have done front end smashes with front air bags going off. and the ones witch have not been primed have been the most dangerous. if u didn't prime glass or body in the best of belron world wide competition. u would fail that job. as u know.
don't think I'm being a smart ass.
as u are a really good fitter.ive been fitting for the biggest company in the world over 30yrs.witch do massive checks with all Dow products. and If I never put primer on. it would be instant dismissal.i would be more than happy to send u the gruesome carnage vids.what no primer does to glass and body does.
I'm fine your video why do you want to remove the cleaners
Where are you located ?
Alex VC Corona California
Hi, do you know what the Sound insulation f apron is (OE code for e46 51488238934 or no. 5 in this diagram www.realoem.com/bmw/enUS/showparts?id=AP71-EUR-10-2004-E46-BMW-320d&diagId=51_3823)?
Does it need to be replaced together with the windshield?
how much does a Auto Glass Technician get paid and doi need experience to get started.Gracias
This video is making me dizzy. Don't use the head cam buddy.