GT1 inspired Murcielago too low? - Lamborghini LP640 project Pt11
HTML-код
- Опубликовано: 25 окт 2019
- That's it! The suspension work for the GT1 aero on the Murcielago is finally complete. In this episode we TIG weld the aluminium uprights, finish the upper & lower arms & drop the car back onto its wheels for an alignment.
Huge thanks to Craig from Dynotorque for dealing with my insane requests & over the top ideas once again!
All previous build episodes:
Part one - The initial plan • Project Lamborghini Mu...
Part two - The ITB conversion • Making a V12 ITB intak...
Part three - Converting Egear to manual • Murcielago manual conv...
Part four - GT1 Headers and the 1st start! • LMGT1 headers on my Mu...
Part five - The R-GT plan - • R-GT Murcielago road c...
Part 6 - Dyno and Fire - • Flaming Loud Lamborghi...
Part 7 - Cutting a Murcie up - • I cut up my Lamborghin...
Part 8 - The suspension - • Making my Own R-GT Lam...
Part 9 - Fixing the doors - • Lamborghini door conve...
Part 10 - The GT wing & suspension update: • Murcielago GT wing & s...
Driftworks - Super awesome wheel & suspension shop! - www.driftworks.com/
Driftworks IG @driftworks
My personal IG @philmorrisondw Авто/Мото
I'm at the point where I need to start seriously thinking about what wheels I'm going to use. They need to be 19" & go up to 13" width for the rear. What do you reckon I should use?
I don't know if I could say you should use them but I'd love to see it on a set of HRE 454 wheels from their vintage line.
Very Lamborghini. I'm thinking more multispoke race car styling though I think.
Something phone-dial and multi piece.
@@driftworks Probably don't go as wide/big as you need, but I'd love to see it on the new Desmond Regamasters
Considered BBS E88? Or possibly something like this: www.ebay.co.uk/itm/BBS-Forged-Racing-Wheels-/123752141565?_trksid=p2385738.m4383.l4275.c10
Phil this looks so incredible you and Craig are true geniuses
Thanks Nick!
It's going to look utterly insane this, I love Driftworks builds, always seems to be on a dream car of mine in some guise or other. Much respect guys 👊👊👊
Thanks Matt! Much appreciated!
@@driftworks would be awesome to see some content on the V10 M3 if that's still kicking about somewhere 😀🤙
I wish I had discovered it after it ended so I wouldn't have to wait in agony for new episodes.
haha, it shouldn't be too long until the next one I hope.
This is mad. That front shot when it was off the 2 poster is amazing. 👌🏼
Haha yeah as you probably heard, we were thinking the same!
Possibly the best channel on youtube at the minute. Thanks for letting us follow progress.
Shame this and the b is for build Lamborghini are on different continent's.. Would be cool to see them together
Thanks Andy & Matt!
Endlessly impressed by the level of skills and engineering each video - beyond brilliant 👍
Thank you!
Best series on RUclips! Great work guys
Thanks George!
I am legitimately in awe of this, superb work.
Thanks Graham!
I am loving this build mate. please keep these videos coming man. so. happy for you dude.
Thank you 👍
Never boring these vids, can’t wait for the next one.
Thanks! Bodywork next!
Unbelievable work as per from Craig and the driftworks crew
Thanks Michael.
Fantastically Ridiculous !! Congrats on the progress!!
Thanks Sean!
That 3 phase welder sounded like a beast! Keep us the awesome work chaps.
Thanks, will do 👍
Hi Phil, crazy wide car 👍 looks k awesome, can't wait when is Finnish. Unbelievable what can Craig do!! The Mechanic!! 👌
Thanks man!
Excellent work!
Thanks 👍
Here from the latest burnout vid, well, might aswell watch again 😂😂
love this build series!
Thanks Mick!
I love that we (the UK) have a car build shop/channel thing and it isn't all USA
Glad you're enjoying what we're doing here.
Superb project
Thanks!
I freaking love it!! This thing is going to be a head turner!!!
Thanks Matt! It should. Especially to those that get it.
Very inventive and clever engineering.
Thanks! 👍
So satisfying to see it track up okay 👌
Thanks James!
Everytime I watch one of your videos it makes me wanna do something else to my Stagea! I'm currently figuring out how to make my own carbon fiber widebody fenders. I'm also in the process to cutting up a factory wing and adding about 7-8 inches in length along with making custom wing stands for support that will attach lower on the hatch. Every video I watch gives me more motivation and a push to just try and do something I've never tried before. Keep up the amazing work cant wait to see this beast on the road!!
Thanks! That's what it's all about. Giving it ago. A lot of the type of work you're describing is what I used to spend my life doing after work on my cars on the road outside my parents house back in the day.
@@driftworks I started in the driveway at my parents place too now its splitting time between work, kids and the car lol. Thank you again for the constant inspiration and keep up the amazing work!
Excellent work 👌👍👍
Cheers Darren!
dude that murci is going to be best 1 world wide , best build on youtube bar none stoked for you bro
Thanks very much!
Yes, keep this going!
Will do man! Thanks!
Yet another insane video love you channel I say it all the time that guy's a genius
Thanks!
enjoying this project, keep it up
Thanks! Will do!
awesome content keep up the content with the mad scientist and yourself Phil
Thanks Mat!
Love everything about this
Thanks!
Legendary build.
👍
Not much for lambo but these guys is on point with any mods. Great work.
Thanks!
That thing is sick Phil.
Thanks man!
Great stuff!!!
Thanks Andrew!
These videos deserve more views.
They're a bit techy for general consumption I think.
Craig really impresses the hell out of me
👍
You have the best mechanic at the same time the best machinist...
We're an effective team #oblivion
O my God, this car looks way to insane to be a street car. I love it.
It's going to look a little different buzzing around Birmingham that's for sure!
Watching this makes me realise how much of a fucking great engineer come machinist come fitter come welder Craig is! Absolutely brilliant guy and what ever he’s getting paid needs doubling!
He's the man!
AWESOMENESS MADNESS
Thanks!
Might bring it to SEMA 2020
I LOVE THIS BUILD ❤️❤️
I'd love to. It's not likely to happen though unfortunately.
awesome work guys full 100
Thanks!
Awesome!
Thanks!
Excellent!!
Thanks! 😎
Epic !
Thanks 👍
That shock turned out great
Thanks Tim.
Increíble machine.looks very beautifull😍😍👌👌
Thank you!
She’s gonna be so sick !!
Hopefully! We've made serious progress, but there's such a lot to do still.
Driftworks oh absolutely!! You guys have transformed this masterpiece into an even more work of art. I wish I could get into building cars like this. That would be AWESOME
Pizza and a Driftworks LP640 video, nice way to start a Saturday evening after doing some car work myself, nothing as awesome as this vehicle though.
I also like Pizza & LP640's!
Great vid Phil, this is such an interesting project, nice to see the old girl move, albeit by manpower.👍👍👍🇬🇧🇬🇧
Thanks man! Bit of a shame to not be able to start it as it's going to be next year by the time we're done at the bodyshop.
Sheer geometric genius.....phenomenal...
Thanks 👍
nice job guys
Cheers Dominic!
Starkey's just jealous that it's lower than his S15 xP
Haha
What a mad project, huge props for all the mad work!
Wouldn't have ever imagined it would take so much work, it seems as if it might have been easier and cheaper to just road register one of ex Murcielago racecars xD
Holly hell thats quite low finally a car that might challenge mx-5 in limbo contest lol
Thanks! It's still a lot easier (for me) & I get exactly what I want which is still a road car. Full interior etc.
Driftworks i guess do but you might be suprised for how cheap the LOC Japan GT1 went for recently
You’ve come so far since the orange zip tie days!!
I still keep a couple of packs of orange zip ties to remind me where I came from haha.
Starkey looks like he can bend a Nardi steering wheel :P And the Murci is looking great, amazing to see the amount of fabrication.
Thanks!
Love it👌🏻
Cheers! 👍
Driftworks we have met briefly over a pint at ring. Sam Tate a good pal. DN 17 I think. Black e90m3 your weapon of choice 👌🏻
You almost forget what a genius Craig of @dynotorque really is
👍
No words! Phil's vision and Craig's ability to bring it to life = automotive porn
Thanks Jon!
That's an incredible machine, someone put in the wrench time
Thanks! For sure!
Beast
😎
This project is insane (In a good way). Could Craig make up a similar shock suspension with lift for a stock murci? Mine are starting to give me trouble and cost 4k each side to replace.
Unfortunately not. The standard shock is extremely short. It's mad that they managed to squeeze a lift piston in there.
Love your videos. Superb engineering and design. On a side note........(Phil)... .. Anyone mentioned you look like Suggs?
Haha, according to comments on this channel 1: Matt Damon, 2: Freiburgur off Roadkill & I think you're the second person to reckon Suggs.
Shows my age I guess 😂👍 excellent work either way Suggs/Matt ...... and that other guy 🥴
Nice
👍
A question I do have Phil, what you doing with the rear end to compensate for all the given work at the front? Last thing we want is a bit of in balance damping don’t we
It doesn't need a great deal. I already modified the rear lower arms before I started the RGT stuff. I want to make sure it sit's low enough & the suspension works as it should, but I don't intend on getting too crazy at this stage.
MADDDD
🤓👍
You probably need to change some settings in the ECU with the new sensor setup
For the ABS? It's the same sensor & the wheel has the same amount of teeth. That's the whole reason we spent so much time doing it this way, so it works exactly as it did.
Impressive..
It will be hopefully 👍🏻
Absolutely SPLENDIFEROUS as always. However, would I be wrong saying that I wish you left the control arms unfinished? Just seems wrong to hide all that beauty underneath the powdercoat. I get why it was done so I ain’t mad at all😁👍🏽👍🏽
T45 still rusts unfortunately.
Driftworks...well, now you know I’m not a metallurgist😂😂 I stand educated brother👍🏽
What are your castor, camber, and toe #'s?
Such a cool project!
Thanks! It's -2.5 camber, 7* castor & 2mm toe in at the moment. As with all my cars, this is likely to change a little when I first start to drive it.
Can you please share the song that you used at 10:10 during the tire swap. Excellent video!! I have been watching the entire series, love your channel!
Thank you! The tune is: Look at you by Anton Vlasov.
@@driftworks Thank you so much!!
Bro those are the wheels I just ordered, put them back in the box!
😂😂😂
Haha, I think we have more, don't worry :D
Are u guys going back to japan anytime soon? Would really like to see another drift movie about japan!!
Nothing planned unfortunately. Although it'll be the 10 year anniversary of Outsiders before we know it.
What tyres are you running on the e30?
Nankang AR-1 👍
@13:09: is that a shockcompressor sitting on the corner of the white table?
Yeah. Craig used to do a lot of work on motorbikes.
She's going to be badass when she is finished
Thanks! Fingers crossed!
the insanity continues, the sickest Mercielago.
Thanks man!
This front suspension - what an achievement.
Like Your supercar You can not do without an KW HLS (2 or 4) lift system.
Thanks! The rear is still a little high, so the nose will lift up a bit naturally. However I will definitely be using that front lift system a lot.
Guys, after welding that front hub, it needs heat treatment, to TF designation. At a guess, I think the original casting would be LM25. After that welding, it's been annealed, and lost 50% of its tensile strength. LM25-TF, Sand Cast 0.2% Proof Stress (N/mm2 ) 200-250, Tensile Stress (N/mm2 ) 220-260 Chill Cast0.2% Proof Stress (N/mm2 ) 230-280, Tensile Stress (N/mm2 ) 280-320. In fact, I'd much rather see a CNC lump for the whole part in the end.
& me. Thanks for the info.
Phil will you be doing some youtube footage of Craig's new Aston Martin project?
Yep, I'll try to start filming before he starts ripping it apart.
@@driftworks awesome 👌 always some good content to watch on this channel
Mental. This is mental
Glad you're enjoying it!
Hi Phill from Driftworks
Hi!
Mate, I don't think your Lambo is going to be ready for SEMA.
😜
Great project though, you'll show the Yanks how it's done.👍
Haha, maybe I should have given myself that deadline..
If you decide to get some hubs made,contact rakeway engineering in stoke-on-trent. There alloy cnc hubs are unreal. I run them on my offroad race car. Fully custom made.
Thanks Alec.
0:19 my name is Hugh, humongous
Why not base it on the R-GT Murcielago?
It is. The GT1 Murcielago is an R-GT. It's the last generation before Reiter Engineering moved to R-SV (which is pretty much identical, just a lot uglier).
@@driftworks Thanks for the info, didn't know that :) Project looks amazing so far, i love GT2/GT3 styled cars
No worries. This aero is from the actual GT1 LeMans car that raced in 2008.
Looks funny RHD nice car though
I've got too many LHD cars. This one's going to be difficult enough to drive as it is :D
please fit center locks... pretty please.
Pretty sure he replied to a similar comment on an earlier video. This is mainly a street car and centrelocks need stupid amounts of torque (big torque wrench required) to put on.
As said, no centrelocks for me. As cool as they are they're a massive pain in the butt & restrict wheel size & offset hugely. Getting this sitting right is super important to me.
Its nice.. In the borat voice obviously 😂😂
Chenqui!
Sema car??
No, it has an engine & drive shafts. It wouldn't be welcome.
All this just to get a bumper and wings to fit - madness
It's a little more than that, but essentially yeah haha.
Driftworks haha, love it!
If it misses the ground it is not too low...............................................................unless you encounter a small bump...........................then maybe it is too low......... :D
haha, I have a feeling I may encounter a bump or two.
Please visit the Essen Motor show...😉
Maybe one year!
Lambo looking thicc Starkey looking thiccer
Haha, he's good at pushing now.
Be wary wary quite I'am hunting Wabits ...... my god he is talented in so my ways
😂
She's beautiful Alright 👌😍👍
Thanks! Certainly will be in paint!
Driving a Lambo, but no 💸 for an oscilloscope. Yeah yeah.... 😂
We have one, but it's massive & didn't need to use it.
Nnnnng, that rear view! ruclips.net/video/AEZaz7epGpM/видео.html
I've still got to fit the lower diffuser panel too!
Nice to see Starkey again.
👍