Gracias por el vídeo!!!!! He cambiado el swich y solucionado el problema del impulsor del aire de la calefacción y del aire acondicionado. Gracias desde España!!!!!
Good job, Pls i have a problem with mine. After fixing it the key stop bouncing when i want to star the car. I mean the key should return when starting the car but the one refuced. Pls, is it the ignition or the fibre?
Great i want to ask a question . what if i did the same connection but i placed the ignition inside the immoblizer (black part) without placing them inside the metal part behind thw steering wheel . will the immoblizer work? will the car start? thanks in advance
Good job Mate!! What exactly was the initial problem? I mean did you replace the cabling as a solution for the ignition didnt worked? Did you have signs when you turned the Key but Still the ignition didnt worked? I am facing a problem like this one in your video. When i turn the Key at the First scale, i am having signs but i cant start the motor. It dosent do anything when i am turning the key at the second scale.
My problem was it didn't start now and then. The new ignition did not fix the problem, it was something with the immobilizer, so I sold the car to a guy who wanted it for spareparts.
Thank you for this video! I replace ignition switch very fast and easy because you! But I have problem now with new lock, car won't start! Instrument table works, ignition, but no start Can you please tell me what can be problem? Programing new key code or something (Peugeot 206 Petrol 1.4)
Check that the imobilizer ring is correct installed on the new ignition. I forgot that and it won't start. After installing the ring back it started on first try. Look here: 19:50
Thank you for reply, I found solution! First I try new ignition switch with new key and with that imobilizer ring, but no luck (won't start). Then I cut new key shell fob and replace with old one shell wich have remote lock.. Then with new key on old remote I go for reset remote control (hold on button 10sec in ignition lock) and now works !! :):):)
Hello mate,I need to change ignition too..I want to do that by myself..did you had any problem after replacment with electronics, codes...or something? Im driving 206 xs,2001. 1.6 petrol
Hello. I have a problem with my pegeout. stops walking. turn off the ignition and turn on. for example it stops if I accelerate suddenly or in step 2 if I accelerate harder. what could it be? Thanks
hi What were the symptoms that you changed ignition switch because I have a problem starting the engine and turning it off immediately, so I ask if it can happen
@@Italjohn thanks for the answer, so no matter what you changed, there was still a problem ?because it happens to me when the car is warm, when it is cold it starts without a problem, do you think it's a problem with the key code or?
because it starts on me and immediately shuts off the engine as if I turned it off on the key, if I keep the key longer it stays on and works without problems
I finally managed to do this, it started first time like it did for you, but the second time it never started again the immobiliser wouldn't let the engine start again!
Thanks mate saved a lot of time with the locking pin, couldn’t figure out why it wouldn’t go back in. Life saver!
That is quite an intricate piece of equipment. Well done!
Gracias por el vídeo!!!!! He cambiado el swich y solucionado el problema del impulsor del aire de la calefacción y del aire acondicionado. Gracias desde España!!!!!
hola tenias problemas de encendido del motor por el switch
Really helpful. Thank you.
Greetings from Portugal.
Thank you from Norway :-)
Gracias me re sirvió el video, saludos desde argentina 🇦🇷
Hello, thank you very much for great tutorial ! it´s help me so much ! :) unfortunately I know only VAG cars..but this really help me !
Great help. Thankyou
Hello , very good work and excellent tutorial , thanks.
Thank you Philippe
çok teşekkür ederim..çok güzel açıklamalı bir video olmuş
Çok teşekkür ederim
Excellent, very clear.
Thank you sir :-)
thank you, tomorrow I'm replacing my ignition:)
Awesome , thanks for the video .
Superb presentation.
Thank you 😀
Very nice video thank you so much 🙏
Good job,
Pls i have a problem with mine. After fixing it the key stop bouncing when i want to star the car. I mean the key should return when starting the car but the one refuced. Pls, is it the ignition or the fibre?
Hi thx.4 lesson i do all how u show in video 👍
ok very good
Great
i want to ask a question . what if i did the same connection but i placed the ignition inside the immoblizer (black part) without placing them inside the metal part behind thw steering wheel . will the immoblizer work? will the car start?
thanks in advance
1000thanks
W0NdErFuL friend greetings froome SPAIN
Thank you
good
Good job Mate!! What exactly was the initial problem? I mean did you replace the cabling as a solution for the ignition didnt worked? Did you have signs when you turned the Key but Still the ignition didnt worked? I am facing a problem like this one in your video. When i turn the Key at the First scale, i am having signs but i cant start the motor. It dosent do anything when i am turning the key at the second scale.
My problem was it didn't start now and then. The new ignition did not fix the problem, it was something with the immobilizer, so I sold the car to a guy who wanted it for spareparts.
Where are you based and do you take car's in to fix them?
I'm in Norway, and I do not take car's in to fix them, sorry
Is this the same ignition coil for a 206 cc? I have only two connectors on mine and not the small black one you have with yours.
I don't know, sorry
Is there a way to buy the lock cylinder only and replace it , and not the switch ?
I don't know, but I would like to say yes, so ask a Peugeot dealer or search ebay.
Thank you for this video! I replace ignition switch very fast and easy because you! But I have problem now with new lock, car won't start! Instrument table works, ignition, but no start
Can you please tell me what can be problem? Programing new key code or something (Peugeot 206 Petrol 1.4)
Check that the imobilizer ring is correct installed on the new ignition. I forgot that and it won't start. After installing the ring back it started on first try. Look here: 19:50
Thank you for reply, I found solution! First I try new ignition switch with new key and with that imobilizer ring, but no luck (won't start). Then I cut new key shell fob and replace with old one shell wich have remote lock.. Then with new key on old remote I go for reset remote control (hold on button 10sec in ignition lock) and now works !! :):):)
Fantastic 😀
@@ItaljohnThanks again man ! Keep doing awesome work :)
do I have to program the transponder after changing the ignition lock?
No
Hello mate,I need to change ignition too..I want to do that by myself..did you had any problem after replacment with electronics, codes...or something? Im driving 206 xs,2001. 1.6 petrol
No problems, it's just plug and play
@@Italjohn thank you mate! Greetings from Serbia
Hello. I have a problem with my pegeout. stops walking. turn off the ignition and turn on. for example it stops if I accelerate suddenly or in step 2 if I accelerate harder. what could it be? Thanks
I have no clue, sorry ☹
Amigo mi pegouet no regresa la llave sóla ... será el conector que tu cambiaste o el metal donde entra la llave te agradesco un opinion
No lo se lo siento
hi
What were the symptoms that you changed ignition switch because I have a problem starting the engine and turning it off immediately, so I ask if it can happen
My car didn't start when warm. Change the lock, but same problem. I did sell the car as scrap. You seem to have an imobilizer problem.
@@Italjohn thanks for the answer, so no matter what you changed, there was still a problem ?because it happens to me when the car is warm, when it is cold it starts without a problem, do you think it's a problem with the key code or?
because it starts on me and immediately shuts off the engine as if I turned it off on the key, if I keep the key longer it stays on and works without problems
the diagnostics show nothing
If you hold the key and it works, it could be a lock problem.
I finally managed to do this, it started first time like it did for you, but the second time it never started again the immobiliser wouldn't let the engine start again!
Mine did the same. I sold it as a parts car
Would this be the same for a 307?
I don't know, sorry 😐
how long did it take in real time? 1 hour?
With out filming, I will say approx 1 hour.
Cómo haces para sacarlo
tx 20 (50mm)?
ce8dc832c.cloudimg.io/v7/_cdn_/04/3C/00/00/0/49984_1.jpg?width=640&height=480&wat=1&wat_url=_tme-wrk_%2Ftme_new.png&wat_scale=100p&ci_sign=2bfd2c660b07dc75ee5e34d14b41ac018489ba2a
That's
No se ve como lo quita, no funciono para mi gracias
it needs mechanic or electrical engineer?
To change the lock you need a mechanic.
Interesting tutorial! I think I have another problem with my Peugeot. Starts but stops the engine in 2 seconds ...
That's typically if there is something wrong with the immobiliser. You need to have the error coded read out.
That's all fine and cool, but how do you remove the ignition if you lost the key?
That's a good question, which I don't know the correct answer for. You may have to drill it out?
@@Italjohn Thank you.
Hi