this week we've maxout my 2013 MAC Pro Quadcore to 12Core and install macos sequoia. we're trying to upgrade to 128bg RAM. but having issues. hopefully we can upgrade it this week
@@ShadesOfTech i am considering the 12 core cpu as well since so cheap now 30-50 best offer, i already have 128 GB ram inside, is there a big performance bump for the 6 compared to 12?
Hey man, great videos. But you need to work on your sound mixing, the difference between your low voice and the very high music volume blew up my ears. Cheers.
i meant the gen 3 model p3, the p3 plus is gen 4 , 2 much ssd for the 2013 mac pro ok, get the p3 ok thats the 1 you need for the 2013, or you,ll get bottlenecked ok. trust me, if you bought the p3 plus, just bring it back and down grade...they,ll understand you need gen 3, not gen 4
Hello a great job, I'm a little confused I've seen videos where they put a processor "E5 2696 v2" and you and others that I've seen place E5 2697 v2 which would be the right one for my Apple Mac Pro ME253LL/A 4-Core Xeon E5-1620v2 3.7 12GB 256GB (Late-2013) MG7251 "AMC 2630" thanks
I am not totally sure it would work. My rule was to use the same cpu as apple shipped it back in 2013. Probably it would work with similar cpu if other people managed to do that. I only tried the one in the video because I was sure it would work.
@@ShadesOfTech so I know this is a good machine back then but if you maxed out the RAM to 128 GB and expand the SSD to 2TB and dual AMD FirePro D700 would you say if I were to save money would this last longer by these maxed out configurations ?
Unless you specifically need 128gb of ram I guess it’s a better option spending money on M2 Pro Mac mini. In the end I got M1 Max Mac Studio and it’s more than enough.
Nice video bro. i got a late 2013 quad-core mac pro with 12Go of DDR3 1866MHz Ram. im just wondering if it's possible to upgrade to 3x8Go DDR4 2400MHz Ram , or it must stay in 1866MHz Frequency ?
You need to use the same ram apple used. If you want you can get up to 64 gb of 1866 or 128 gb with slower. Go on OWC to see the correct specs. Considering it’s 2013 there’s no way it supports ddr4. It didn’t exist yet in 2013
@@ShadesOfTech thanks bro. So i can use 4 x ram with same frequency of 1866Mhz either use others DDR3 ram (also same frequency but slower than 1866MHz)?. can't i use DDR3 ram with higher than actual frequency ?
I have been using the 12 core for more than a month and it’s tremendous power! Breaks FCPx like butter in rendering and exporting. Also got an egpu with 5700 xt video on the way it’s extremely powerful
@@RareMade I didn't test 3d but I can tell you that I am testing 8k video editing with an e-gpu and it works. So I think with a good gpu and the 12c cpu you could handle 3d as well. Not sure if 3d is more CPU or GPU intensive or both
he has to work on the audio levels tho the music is way to loud and then when he speaks the audio is to quiet so i am constantly turning my audio up and down
I talk about performance boost in this video! Mac Pro 2013 12 core in 2020 worth it? Intel Xeon E5 2697 v2 Benchmark | Shades Of Tech ⬡ ruclips.net/video/GE9NpqD0iSY/видео.html
Not sure if they were with the original 2013 wave but definitely with the second apple wave, so they are the same Apple would have mounted. The v3 are not compatible tho (up to 16 core) everymac.com/systems/apple/mac_pro/mac-pro-cylinder-faq/how-to-upgrade-mac-pro-cylinder-cpu-processor.html
Will this work Intel Xeon E5-2697 V2 SR19H 2.70GHz 12 Core CPU Processor FCLGA2011 for a Mac Pro 2013 ? Or SR19H Intel Xeon E5-2697 v2 12-Core 2.70GHz QPI 30M 130W FCLGA2011 Processor not sure what the difference is so many or the LGA 2011
Saludos desdes Ecuador Exelente información, tengo una consulta, cuanto maximo de RAM puedo ponerle a una MAC PRO LATE 2013, Procesado: 3,5 GHZ 6-COre Intel Xenon E6, AMD Firepro D500 3072MB, lo utlizo para edicion de VIdeo y los redenres estan muy demorados al momento tengo 16 de RAM Saludos
Según yo 64gb es lo máximo, quizá sería interesante ver si puedes hacer el upgrade de las tarjetas de video ya que también importa mucho pero sería mucho más caro y sería conseguirlas de segunda mano. La unica opción para eso serían las AMD Firepro D700.
kenri young yeah the cpu improved a lot the performance even if with video editing the biggest improvement was using an egpu with the amd 5700xt. But it’s more expensive
This is a very specific question. There are definitely some scaled resolution. If you want to see all of them you just need to press alt and then click on scaled and you will see all the scaled resolutions, even the ones not optimised. If this doesn’t work you can use an app called switch res x that allows to trigger any resolution or framerate you want. Back to your question you can select 3008x1692 at 60hz and it’s actually the one I use with my Mac and one of the 4 suggested by apple so you should be safe and sound. But ultimately it’s up to you Mac gpu the resolution it can drive
Shades of Tech currently I have a 2018 Mac mini and I needed an egpu to make the hi smooth. I got a 2013 Mac Pro 6core/32gb ram/d300 yesterday off eBay. I won’t get it for a couple weeks. But I wanted to make sure macos is still smooth on 32”4k display @60hz and scaled 3008x1692
Yeah I didn’t have any problems with my Mac Pro with D300 as well so you can be safe and sound! The Mac mini doesn’t have an internal gpu so it’s pretty natural that it can’t run smooth 4k display
Yeah it’s confirmed it supports 128 Gb but you have to use slower ram dims. In my usage scenarios at full load while video editing I use maximum 32 Gb so in my case you want to have faster dims rather than more ram. If you need more ram because you use more than 64 gb you can use 128 gb but if you don’t do that it doesn’t make sense the extra money
Gulp. Got all the way to the inside, but then the final four internal screws holding the CPU have solid caps! No Torque screw hole in them! What the heck! Has anyone seen this? And if so, how the heck do you remove those?
Saw this on another site!!! Yay!... "you've run into Apple's new tamper-evident screw stickers. Before you proceed, please note that removing these screws will leave behind clear evidence to Apple that you've been inside the computer, leaving you no wiggle room on your warranty. To remove the screws, first press down with the T10 screwdriver around the centers of the circles, where you would expect the holes to be, and you'll tear right through the stickers (you may have to blindly rotate the screwdriver a bit to get it to line up correctly, since the stickers conceal the holes). Then, just unscrew as normal. A couple more notes: new Mac Pro 2013's started shipping with these CPU screw stickers some time in 2015, and if you take an older Mac Pro 2013 in for repair, Apple will quietly add the stickers if, during the repair process, they end up stripping the computer down to the CPU bracket. I haven't found a satisfactory method for preserving the stickers, nor a replacement, but I imagine it could be done... davidmatics - Aug 9, 2016"
Apperently you can upgrade the trash cans wifi card, using only the 2015 Macbook pro 8.1 wifi card..is this true?..And whats your opiuon, on the owc 128gb memory kit!.Do you use that?, in the 5.1 rigg?They make 1 for the 5.1 Mac pro tower, I call it..They explian how the 12 core works using only 1066mhz, not 1866, but you need 128 more than you realize, type thing.for your heavier work, editing etc,,True?..or just use 64 gb 1866?
Shades of Tech is the d300 dual gpu okay for photoshop, illustrator, premiere, after effects and maybe blender? the computer has a 6 core Xeon and 45gb of ram I believe. Also do you have a video on your gpu?
It yet I am working on it. Not sure if those applications are gpu intensive, probably only blender. The rest should be only cpu intensive and you can still upgrade to the 12 core cpu
Never mind after doing some research I found what the numbers are. 12-Core CM8063501288843 12-Core BX80635E52697V2 (Part number prefix BX means in OEM BOX) ---------------------------------- 10-Core CM8063501374802 10-Core BX80635E52690V2 (Part number prefix BX means in OEM BOX)
Greetings from Ecuador Excellent information, I have a question, how much maximum RAM can I put in a MAC PRO LATE 2013, Processed: 3.5 GHZ 6-COre Intel Xenon E6, AMD Firepro D500 3072MB, I use it for video editing and the redeemers are very delayed at the moment I have 16 RAM Regards
Hi! You can put a maximum of 128 gb but will run at lower speed. My suggestions for video editing since I use myself for the same purpose it at least 32 gb. If you use FCPx it would be enough, otherwise I would go to 48 gb. 64 will be overkill
@@ShadesOfTech Thank you very much for answering, I have problems in Premiere, but when I render shots in SLOW MOTION, the render is very delayed and I see that the machine also heats up, I will go from 16 to 64 in ram, in which brand would you recommend me regards Thank you very much, your information is very useful to me
I used the ones from OWC because I had problems with eBay sellers that sold me non compatible ones. I would suggest you to switch to FCPx or davinci because they take more advantage of the gpu since you have the d500. I know is a complete change but performance are much better. I think you should give it a try
What's the matter with your sound level throughout the video?! The shutty music beat the purpose of your project!!! Please keep your voice only. Music is not needed here neither the high sporadic volume...
You need to work on your editing bro! The audio levels are WAAAY to high and your vocals are WAAAY too low. Constantly turning volume up and down. You even overlap the vocals and audio in certain spots... need to bail on this video.. Nice try though.
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
Potentially very good and informative video, ruined by inappropriately loud and totally unnecessary background "noise".
Numero uno. Ora procedo pure io all'upgrade del mio stupendo TrashCan!
Bello! Io l’ho venduto alla fine per il Mac Studio però è un pezzo di design bellissimo
taking the cpu's screws were a pain. They're super tight, but it's worth it, great video.
Yeah more than I anticipated! But in the end it worked!!
Great job.
Why didn't you change the thermal paste on the graphics card?
Now thats taking trash and turning it into gold!
It parkoured from 2013 to 2020 pretty quick
Awesome upgrade
Thanks! I just hooked up an AMD Radeon RX 5700 XT and testing some 8k video editing!
this week we've maxout my 2013 MAC Pro Quadcore to 12Core and install macos sequoia. we're trying to upgrade to 128bg RAM. but having issues. hopefully we can upgrade it this week
Great Job man, I've managed to upgrade mine to 12-Cores CPU as recommended by you. Now looking for the RAM upgrade soon. Keep it up man.
Thanks a lot! Happy you found it useful! Which gpu are you rocking? Check out my videos about egpu on Mac Pro as well
@@ShadesOfTech i am considering the 12 core cpu as well since so cheap now 30-50 best offer, i already have 128 GB ram inside, is there a big performance bump for the 6 compared to 12?
@@sirlimpsalot7767 yes
Hey man, great videos. But you need to work on your sound mixing, the difference between your low voice and the very high music volume blew up my ears. Cheers.
Thanks for the feedback! I’ll try to work on your input!
Hans Schutz thanks. I wanted to say the same!
Good feedback @Shades
Haha! It felt like he was doing this video right next to a dance club and every time the club door opens loud music comes blasting out
Do you know if this nvme is compatible and is a good option to use in Mac pro 2013? Crucial P3 Plus 1TB M.2 PCIe Gen4 NVMe
yes, heard it was getting 1500 read speeds, please post speed test
i meant the gen 3 model p3, the p3 plus is gen 4 , 2 much ssd for the 2013 mac pro ok, get the p3 ok thats the 1 you need for the 2013, or you,ll get bottlenecked ok. trust me, if you bought the p3 plus, just bring it back and down grade...they,ll understand you need gen 3, not gen 4
how did you make out?
wow great job man, and nice video =)
Thanks a lot! Happy you liked it!
Hello a great job, I'm a little confused I've seen videos where they put a processor "E5 2696 v2" and you and others that I've seen place E5 2697 v2 which would be the right one for my Apple Mac Pro ME253LL/A 4-Core Xeon E5-1620v2 3.7 12GB 256GB (Late-2013) MG7251 "AMC 2630" thanks
I am not totally sure it would work.
My rule was to use the same cpu as apple shipped it back in 2013. Probably it would work with similar cpu if other people managed to do that. I only tried the one in the video because I was sure it would work.
Congratulations Brother! Fantastic Vídeo! God Bless You!!!
onevisionoficial thanks a lot!
I like how you had no problems showing people you bent the pins on the logic board.
It works perfectly
@Shades of Tech is this Maxed out machine worth in today's Market considering Monterey will end its support in late 2024 ?
Not at all, considering that m1 Mac mini base performs as well as this machine in video editing. And costs 300$ used
@@ShadesOfTech so I know this is a good machine back then but if you maxed out the RAM to 128 GB and expand the SSD to 2TB and dual AMD FirePro D700 would you say if I were to save money would this last longer by these maxed out configurations ?
Unless you specifically need 128gb of ram I guess it’s a better option spending money on M2 Pro Mac mini. In the end I got M1 Max Mac Studio and it’s more than enough.
Im sure you will be able to run the next version macOS Sonoma as long as upgrade meet requirements
Nice video bro.
i got a late 2013 quad-core mac pro with 12Go of DDR3 1866MHz Ram.
im just wondering if it's possible to upgrade to 3x8Go DDR4 2400MHz Ram , or it must stay in 1866MHz Frequency ?
You need to use the same ram apple used. If you want you can get up to 64 gb of 1866 or 128 gb with slower. Go on OWC to see the correct specs.
Considering it’s 2013 there’s no way it supports ddr4. It didn’t exist yet in 2013
@@ShadesOfTech thanks bro.
So i can use 4 x ram with same frequency of 1866Mhz either use others DDR3 ram (also same frequency but slower than 1866MHz)?.
can't i use DDR3 ram with higher than actual frequency ?
great video man!!! nice upgrades
Thanks man! Really cost effective considering the performance boost!
I am about to do the same CPU Upgrade... processor is on its way 🤗
I have been using the 12 core for more than a month and it’s tremendous power! Breaks FCPx like butter in rendering and exporting.
Also got an egpu with 5700 xt video on the way it’s extremely powerful
Shades of Tech show us!
would it be good for 3D? I want to get one and use it for that and photoshop as well for video editing /fx
@@RareMade I didn't test 3d but I can tell you that I am testing 8k video editing with an e-gpu and it works. So I think with a good gpu and the 12c cpu you could handle 3d as well.
Not sure if 3d is more CPU or GPU intensive or both
@@ShadesOfTech anyway you can test it please
Does that Xeon processor work with te a1481 Mac pro model?
Yes
You do awesome videos, hope your subs will increase!
Thanks a lot! Really appreciate it!
he has to work on the audio levels tho the music is way to loud and then when he speaks the audio is to quiet so i am constantly turning my audio up and down
what type of performance boost can you expect upgrading from 6 to 12 core? thank you.
I talk about performance boost in this video!
Mac Pro 2013 12 core in 2020 worth it? Intel Xeon E5 2697 v2 Benchmark | Shades Of Tech ⬡
ruclips.net/video/GE9NpqD0iSY/видео.html
Are the V2 processors new ones that didn’t come with the originals?
Not sure if they were with the original 2013 wave but definitely with the second apple wave, so they are the same Apple would have mounted. The v3 are not compatible tho (up to 16 core) everymac.com/systems/apple/mac_pro/mac-pro-cylinder-faq/how-to-upgrade-mac-pro-cylinder-cpu-processor.html
Cool Switch style Apple watch.
Thanks I love it! Just need to buy 2 different colour bands and mix! The result is dope!
Will this work Intel Xeon E5-2697 V2 SR19H 2.70GHz 12 Core CPU Processor
FCLGA2011 for a Mac Pro 2013 ? Or SR19H Intel Xeon E5-2697 v2 12-Core 2.70GHz QPI 30M 130W FCLGA2011 Processor not sure what the difference is so many or the LGA 2011
I’m not sure about this question. I would say that the one that apple used will work 100%
Saludos desdes Ecuador
Exelente información,
tengo una consulta, cuanto maximo de RAM puedo ponerle a una MAC PRO LATE 2013, Procesado: 3,5 GHZ 6-COre Intel Xenon E6, AMD Firepro D500 3072MB, lo utlizo para edicion de VIdeo y los redenres estan muy demorados al momento tengo 16 de RAM
Saludos
Según yo 64gb es lo máximo, quizá sería interesante ver si puedes hacer el upgrade de las tarjetas de video ya que también importa mucho pero sería mucho más caro y sería conseguirlas de segunda mano. La unica opción para eso serían las AMD Firepro D700.
yo tengo esa misma mac la maxima ram que soporta es 128 gb de ram
y lo maximo de almacenamiento son 8 tb ssd
Yeah 128 bud at slower speed than 64 gb
You did a fantastic job with the video!！Is the performance of fpcx clip 4k significantly improved after the upgrade?THX，
kenri young yeah the cpu improved a lot the performance even if with video editing the biggest improvement was using an egpu with the amd 5700xt. But it’s more expensive
Entonces no es sierto que puedo ampliarlo a 128 gb? Solo a 64
You can go up to 128 gb but with slower ram
Are you able to able to run a scaled 4k60 dipslay with this @60hz and 3008x1692 via Display port cable?
This is a very specific question. There are definitely some scaled resolution. If you want to see all of them you just need to press alt and then click on scaled and you will see all the scaled resolutions, even the ones not optimised. If this doesn’t work you can use an app called switch res x that allows to trigger any resolution or framerate you want.
Back to your question you can select 3008x1692 at 60hz and it’s actually the one I use with my Mac and one of the 4 suggested by apple so you should be safe and sound. But ultimately it’s up to you Mac gpu the resolution it can drive
Shades of Tech and it’s smooth?
@@maxnguyen2875 Yeah definitely smooth. As I say I use it everyday as my favourite resolution. What Mac do you have?
Shades of Tech currently I have a 2018 Mac mini and I needed an egpu to make the hi smooth. I got a 2013 Mac Pro 6core/32gb ram/d300 yesterday off eBay. I won’t get it for a couple weeks. But I wanted to make sure macos is still smooth on 32”4k display @60hz and scaled 3008x1692
Yeah I didn’t have any problems with my Mac Pro with D300 as well so you can be safe and sound! The Mac mini doesn’t have an internal gpu so it’s pretty natural that it can’t run smooth 4k display
what do you think about upgrading the ram to 128gb? according to OWC and transcend jetmemory this mac pro 2013 is capable of supporting 128gb of ram
Yeah it’s confirmed it supports 128 Gb but you have to use slower ram dims.
In my usage scenarios at full load while video editing I use maximum 32 Gb so in my case you want to have faster dims rather than more ram.
If you need more ram because you use more than 64 gb you can use 128 gb but if you don’t do that it doesn’t make sense the extra money
@@ShadesOfTech i think it will support load reduced dimms to which should keep the 1866
Is it possible to upgrade the gpu?
kenri young possible if you find other dual gpu but will cost you less an egpu enclosure with a gpu
Gulp. Got all the way to the inside, but then the final four internal screws holding the CPU have solid caps! No Torque screw hole in them! What the heck! Has anyone seen this? And if so, how the heck do you remove those?
Saw this on another site!!! Yay!...
"you've run into Apple's new tamper-evident screw stickers. Before you proceed, please note that removing these screws will leave behind clear evidence to Apple that you've been inside the computer, leaving you no wiggle room on your warranty. To remove the screws, first press down with the T10 screwdriver around the centers of the circles, where you would expect the holes to be, and you'll tear right through the stickers (you may have to blindly rotate the screwdriver a bit to get it to line up correctly, since the stickers conceal the holes). Then, just unscrew as normal.
A couple more notes: new Mac Pro 2013's started shipping with these CPU screw stickers some time in 2015, and if you take an older Mac Pro 2013 in for repair, Apple will quietly add the stickers if, during the repair process, they end up stripping the computer down to the CPU bracket.
I haven't found a satisfactory method for preserving the stickers, nor a replacement, but I imagine it could be done...
davidmatics - Aug 9, 2016"
I did not have the warranty tops. Anyway my Mac Pro was already long gone out of warranty
Apperently you can upgrade the trash cans wifi card, using only the 2015 Macbook pro 8.1 wifi card..is this true?..And whats your opiuon, on the owc 128gb memory kit!.Do you use that?, in the 5.1 rigg?They make 1 for the 5.1 Mac pro tower, I call it..They explian how the 12 core works using only 1066mhz, not 1866, but you need 128 more than you realize, type thing.for your heavier work, editing etc,,True?..or just use 64 gb 1866?
Help! I upgraded the memory, no issues. I upgraded the cpu and it's turns on for 5 seconds and then shuts off
Does it make any sound?
What reason in video if you not comparison old config with new?
I made other videos where I compared before and after configurations with a lot of different benchmarks. Check them out if you want to see that
@@ShadesOfTech sorry, I can't find
Here’s the playlist of videos I mad about Mac Pro
ruclips.net/p/PLlPrMEtoHVOJsmFUnzDkLb2YrlEZ7uP0G
Is the GPU upgradeable? I can get my hands on a 6 core but it has d300 graphics
No you don’t want to upgrade the gpu.
I bought an egpu and mounted the amd rx 5700 xt and is a bomb!
Shades of Tech is the d300 dual gpu okay for photoshop, illustrator, premiere, after effects and maybe blender? the computer has a 6 core Xeon and 45gb of ram I believe. Also do you have a video on your gpu?
It yet I am working on it.
Not sure if those applications are gpu intensive, probably only blender. The rest should be only cpu intensive and you can still upgrade to the 12 core cpu
Can edit 4k video??
Yes I’ve been editing all my 4k videos since January on this machine!!
you work with memory IN? That is not good
No
I like this it looks very cool
Thanks it's awesome! The best Mac I have ever owned!
Does anyone know or can share the Intel 12 core CPU part number?
Never mind after doing some research I found what the numbers are.
12-Core CM8063501288843
12-Core BX80635E52697V2 (Part number prefix BX means in OEM BOX)
----------------------------------
10-Core CM8063501374802
10-Core BX80635E52690V2 (Part number prefix BX means in OEM BOX)
Greetings from Ecuador
Excellent information,
I have a question, how much maximum RAM can I put in a MAC PRO LATE 2013, Processed: 3.5 GHZ 6-COre Intel Xenon E6, AMD Firepro D500 3072MB, I use it for video editing and the redeemers are very delayed at the moment I have 16 RAM
Regards
Hi! You can put a maximum of 128 gb but will run at lower speed. My suggestions for video editing since I use myself for the same purpose it at least 32 gb.
If you use FCPx it would be enough, otherwise I would go to 48 gb.
64 will be overkill
@@ShadesOfTech Thank you very much for answering, I have problems in Premiere, but when I render shots in SLOW MOTION, the render is very delayed and I see that the machine also heats up, I will go from 16 to 64 in ram, in which brand would you recommend me
regards
Thank you very much, your information is very useful to me
I used the ones from OWC because I had problems with eBay sellers that sold me non compatible ones.
I would suggest you to switch to FCPx or davinci because they take more advantage of the gpu since you have the d500. I know is a complete change but performance are much better. I think you should give it a try
Cool vid
Thank you!
Hello i like your stuf that you do
Thanks really appreciate it
Does this really need the loud annoying music? 😡
Fuck man! My ears. Music is too loud. Ufff. Be careful next time
Sorry about that! In the last videos I have been more careful with music levels
What's the matter with your sound level throughout the video?! The shutty music beat the purpose of your project!!! Please keep your voice only. Music is not needed here neither the high sporadic volume...
Yeah you’re right, this video was a long time ago, now I try to match music and talking to the same audio level
You need to work on your editing bro! The audio levels are WAAAY to high and your vocals are WAAAY too low. Constantly turning volume up and down. You even overlap the vocals and audio in certain spots... need to bail on this video.. Nice try though.
The music…. bleeeeeh
music is distracting
Hi
Hey how are you doing?!
@@ShadesOfTech good you?
@@lili_glitch_lili2389 Fine thanks!
Your music is really annoying...
Turn off the audio