Making A Better Leather Apron !
HTML-код
- Опубликовано: 11 май 2021
- Ive been wanting to make a new apron for some time now. My old apron worked fine but it left a lot to be desired. I wanted a place for my lapel mic for when Im creating videos, and I also wanted a place for my tape measure to go on and off easily. A sheath to hold a small hand plane for when I'm doing wood working, and a place to hold a small square. I also wanted a towel ring for when I'm doing glue ups so I have a place to wipe the glue off my finger. It would also be cool to have a magnetic strip to hold all those little tools that I keep setting down and forgetting where I put them every five seconds. So, having just bought a sewing machine that can handle the job, I set out to make my perfect apron! Thanks for watching my DIY apron , and don't forget to subscribe. Shaloha!
Хобби
The butt blur was everything lol
And that’s how I know you watched till the end 😂.. Thanks 🤙
It's awesome to be able to make a custom apron to perfectly suit your needs. Great video with a hilarious ending!
Thanks Qexen .. Glad you enjoyed watched to the end 😜 haha
You are a master craftsman, dude. I truly appreciate you sharing this video -- I am blown away by your videos and your skills. Thanks!
Thank You getnpayd1964, the magic of video is I can edit out all my mistakes 😜 .. haha Thanks for the compliment 🙏🤙
First leather project?? That’s awesome dude!
Yes! Thank you! There are things I would do differently or change on the next one.. but that’s how I learn ;) 🙏🤙
OLD Leather Smith here, I believe it is a GREAT Video, terrific 4 a beginner, you also have some excellent ideas, I have a few suggestions, NEVER STRIKE A METAL PUNCH WITH A METAL HAMMER USE A PLASTIC FACE HAMMER THAT WAY OVER YEARS OF USE YOU DON'T MUSHROOM THE HEADS OF YOUR TOOLS, I don't skive my joints if necessary 4 rivet length I make leather washers this gives joints more strength personal preference that really works over time. Skip music hearing the work works better 4 the beginners and ME! GOD'S BLESSINGS ✝️⚾🙃
Thanks for the tips James. I’m definitely no expert when it comes to leather work, the apron was my first project, so any advice from someone with experience is greatly appreciated! Thank you 🙏🤙
Thanks for the lesson I absolutely slammed the punch with a metal hammer and will no longer do this anymore
That’s one well built Aapron!! Thanks for sharing
Thank You Bar31 🤙
funny and unexpected ending lol keep up the great work my friend =)
Haha.. glad you watch to the end 😜 I’ll try and keep the videos coming 🤙
Wow man! That turned out beautifully, definitely going to be inspiring my apron build 🤙🏻🤙🏻
Thanks FrozenNorth… let me know if you have any questions along the way🤙
Hahahah the end! Very nice video, thank you!
Haha.. you’re the first to comment on the end... I’m curious how many people actually watch the full video 😜
Wow, awesome work! Love the little California touch
Thanks Mike 🙏🤙
That’s awesome dude I’ve made 2 and now have more ideas 😂
Hahaha awesome.. now get proficient at it and have a thriving business ;) 🤙
Thanks for a ton of creative and practice ideas.
You are welcome, thanks for watching 🙏🤙
Awesome man! Time to build something badass now! You have everything you need.
Ha.. Thanks again Dustin🤙 I have some B.A. ideas for coming videos 😜
Love the magnet thing😍🙌🌺🏵🌼🌻🌹
I like the magnet thing too 😜 Thanks for watching 🙏🤙
hi I'm your Taiwan fans
sorry my english is weak
my frist your video is DIY Raccoon Trap
I love you and your children interactive
hope see more you and children make something
Thank You so much for watching my videos🙏… I will definitely be doing more videos with my kids. 🤙
Gostei muito do seu trabalho mandou muito bem . Mahalo irmão 🤙🏾
Thank You.. Mahalo and Shaloha 🤙
Love the apron
Thanks David 🤙
Hi; servo motor for the Juki guy here... I think we may have been separated at birth (well, except for the fact that I'm probably 25 years older than you, but let's not quibble...).
Awesome job for a first project! I've got one underway myself, with many of the same ideas, motivations, etc. Here are the very few that I have that I didn't see in yours FWIW; might be a retrofit over time?
• Velcro closure sewn into the bottoms of the big pockets; allows you to empty sawdust from them.
• Flaps over same pockets; see 'sawdust' above.
• Cannibalize a set of shoulder straps from a backpack, and incorporate them into the straps for a more comfy fit.
• Not sure if you have one (but given that we also own the same Wilton vise, there's at least a 50% chance...), but you can use a vacuum bag to do the wet leather forming much more effectively than the thumbtack method.
So, in case you are wondering, our next big project is to build a woodworker's toolbox that looks like the Snap-On box we already have for mechanics tools, but is made of wood, sized for woodworking tools, complete with tool foam cut to shape, and then wrapped in vinyl so as to appear painted at automotive quality. Please get started on that ASAP, I'm eager to see how mine will turn out and what problems I might encounter so that I can avoid them. Thanks! 😂
Dang! I should have bounced some ideas off of you before I started this apron😜. I like the idea of an opening to eject all the wood shavings out of the bottom pockets! ...A faux metal Snapon toolbox for wood tools.... oh yes ... good idea. I’ll definitely get started on that for you ASAP. That is, after I complete the scrolling list of projects I have on my workbench 😜
@@ShalohaCreations No, no, no... It's not for ME; it's for US! If it was just for ME, that would be selfish!
@@kevinnathanson6876 hahaha... oh in that case I’ll get started on it right away 😂
First leather project! So impressive! Should post to Reddit diy. Keep up the awesome work!
Thanks ABpub.. I’ll have to check that out 🤙
Love the strap in the back! Neck straps are the reason I dont wear an apron
Thank You.. wish I could say that was my original idea, but I have seen this done on other aprons. So far I am likening it 👍
Great job brother. There's a lot of great design ideas in this project. Would have liked to have known what weight and type of leather you were using though? Chrome/Died Veg Tan ect....
I love the idea of magnet strips I think I'm going to steal that. Adam Savage from MythBusters made one as well and he did a split leg apron. Seems like a cool feature to add or tryout. Keep up the good work!
Thanks Max.. I bought a full half cowhide died veg tan leather. I can’t remember weight but I do wish I had gone a little lighter.. The magnet strip has been very handy but there is a down side when metal working in that it picks up a lot of metal shavings. Not a big deal but still annoying ;) I would do it again if I made another one 🤙
My toxic trait is thinking i can TOTALLY do this
I like that kind of toxic .. you should totally do it 😜
That isn't toxic. Just keep learning and trying. Every talented person broke a lot of stuff getting there.
That's awesome. If you ever think of something else you need you can just add it.
So true ;) The bionic apron 😜
@@ShalohaCreations HAHA! Hell yeah!
Good job!
Thank you 🙏🤙
Rad leather project bro. New subscriber, looking forward to some more of project videos.
Thanks you for subscribing danielpreilly .. I am currently on a but remodel renovation job that’s eating up all my time for the next few months. I plan on getting back in the shop and making videos as soon as I can🙏🤙🤙
I didn't hear you mention what leather you used? 3/4 ounce maybe?
Thanks Phillip, that’s because I lost the paperwork from the company I bought the leather from. I can’t remember thickness but I do know if I were to do it over again I would probably go a tad thinner for more flexibility. If I remember right, I bought a half Hyde that was oiled vegtan. Sorry, hope that helps. 🤙
Nice job. Can you tell me how thick your leather is on the apron and where you purchased the leather?
Honestly it’s been so long since I’ve made this I don’t remember.. but I can tell you I do wish I had gone a little thinner on the leather as it is a bit heavy. I’ll see if I can find the vendor I used and send it you way. Thanks
wow! Just sayin'...
Thank You 🙏🤙
Where did you get the sliver you used to slice for the rolled top of the pocket? It looked easier than the slivers I find for sale
Disregard. I see it’s a French sliver. Must be nicer than mine, cuz it seemed to work in one easy swipe! Thanks for the video.
what leather is he using? or whats the most durable one to use? even if it wont be so confortable because of the thickness i just want it the most durable possible
This is a full half hide oil tanned leather.. I think if I remember right it’s 4-4.5 oz. Little thick for an apron, but definitely durable.
Batman would be proud... except for the end. It remimded me of the Hugh Jackman ad for leather shoes.
BwaHahaha 😂… I guess it’s a bit like that 🤙
What is the metal piece holding your tape measure made of specifically? I’m considering making myself a similar apron. Love the video!
It’s just a piece of aluminum I found in the shop and bent to shape 🤙👍
some of it sounded like he was speaking animal crossing
I had to look up Animal crossing .. then went back and watch the video. Hahaha
I jumped onto youtube looking to troubleshoot a wobbly drill press and got completely sidetracked with this video. LOL Apron looks great.
Haha, easy thing to have happen when watching RUclips. Glad you stumbled upon my channel😜 🤙
wow that is a very big leather how many feet it that
That’s what they call a “Half Side” . It’s one half of a cow. If you have more than one leather project it pays to buy full or half sides. 🤙
Hi , ¿the thickness of the apron is 2mm?
I can’t remember but I believe so.. I would go a little thinner next time if I did it again
Any chance you can make me one of these Aprons?
Hi MrBackdaddy.. sorry for late response. I’ve been working on a remodel that’s been taking up all my time the last few months.. unfortunately I do not have time at the moment to make another one of these aprons. I am still working on the remodel and have several project in line when I’m done, but thank you for inquiring. Much appreciate, Shaloha 🤙
Quais as medidas ?
35” tall by 28” wide at base and 11 3/4 wide at neck. 👍
Where do you live, Monterey?
Little Town called Templeton.. between Paso Robles and Atascadero