42" TFL Osprey First Run Tp power Sea king 180
HTML-код
- Опубликовано: 10 сен 2024
- 42' osprey
Tp 4070 1220kv
sea king 180
6s2p (6s 6000mah x2 in parallel) = awesome runtime 12,000mah
Abc 2015
So truth be told this probably went slower with the motor I installed vs the stock motor If both were run on 6s, due to approx 1000 less KV on the TP motor.
I could have made the first vid with the 300amp pro marine installed but really wanted to see if the sea king 180 could handle this big TP motor
in the first place, It can with the proper lvc settings.
Next time the promarine 300amp will be installed and we will try it on 8S.
STAY TUNED.........
also this is the first vid i uploaded in 4K
THANKS FOR WATCHING
Nice!! Looking forward to the 10s run 🙂
Thank you my friend 👍👍
I always run my 180A whit LVC disabled👌
Nice vhulls again 😁👍
I was hoping that with it being such low KV(1220) that maybe I could run with it on but no, the end part of the video it was turned off and the boat ran much better.
Hello my friend nice boat
Thank you sir 👍👍
Nice! I'm looking forward to seeing it go over 100 mph in no time! 👍
Haha, thanks my friend
Heck yeah! Always thought those were good looking boats. Is the kevlar factory?
Thank you 👍👍
Yes it was but it was an option so must specify when ordering it otherwise it will come without it.
perfetc
Thank you very much
Great run and hot set up 💪
Thank you my friend 👍👍
I have the same ESC and it keeps shutting down, just like this when I get it up to higher speeds. How do I fix that? Also I have my timing at the #4 setting on the program card. I don't know what to set it up on
Lower the lvc, I had to turn it off completely, if you watch the end of the video it was resolved and that's all I did.
The down side is now you have less or no lipo protection so you need to get a lipo alarm or use a timer and don't run the batteries too low.
This is also a common problem when using sucky batteries.
Timing depends on motor wind, D wind motors like low timing 0-5* or so
Y wind motors like 10-15* timing typically
@@secretsquirrel1942 what battery do you suggest. I run zeee 6s 5200mH 100c. My motor is an 4082 2000kv. Sorry for the question bomb. I'm new to boats. I was running a CNC 50mm detouged prop. I have smaller CNC and x445 x447 x450 although I'm not sure what would work best. I bought a bunch of stuff from a guy getting out of the hobby. The ESC and 4082 are in a Sonicwake
Hubcity? Is that Mississippi?
I like the turnigy graphene panther 75c 5000mah, most durable battery I have ever used.
I also like hrb graphene.
If the batteries are newer with few runs than thats probably not the problem, old ones with lots of runs can have issues.
Sea king 180s can have issues with 4082 motors when run on 5 or 6s, never had issues on 4s though.
Lower lvc stock is 3.2v untill problem goes away, then use the timer on your smart phone, if it gets a 5 minute runtime normally then set timer to 4 minutes, stop the run at 4 minutes and recharge batts
Keep in mind the older the batteries get the runtime will go down.
@@secretsquirrel1942 Outstanding!! Thanks for the information. No, Lubbock is known as the hubcity in Texas. I'll try again with what you recommend and see how it goes. I appreciate your help. Cheers from Texas!!
That’s a lot slower than I was expecting lol.