Mine only has: Pulses_Per_Mile*99-00 Primary_Output_PPM Secondary_Output_PPM Is one of these where I input the transmission number? Do you know which number from your calculation I would put in Primary and Secondary?
Pulse Per Mile is what you would change. Primary and Secondary Output PPM are the signal in which the speed is sent to other modules like the gauge cluster and abs. Are you using Universal Patcher for this?
@@brandongarnold So I used UP to create the XDF from my BIN. The parameters above were from that XDF in TunerPro. What do I put for the primary and secondary?
I looked at a 2000 bin file with universal patcher and the pulse per mile doesn’t quite add up to equal they correct tire size. I’m not sure if it shows the incorrect number in the table or if it’s calculated differently.
Thank you again, this is another issue i have to deal with. Great video keep up the great work.
Mine only has:
Pulses_Per_Mile*99-00
Primary_Output_PPM
Secondary_Output_PPM
Is one of these where I input the transmission number? Do you know which number from your calculation I would put in Primary and Secondary?
Pulse Per Mile is what you would change. Primary and Secondary Output PPM are the signal in which the speed is sent to other modules like the gauge cluster and abs. Are you using Universal Patcher for this?
@@brandongarnold So I used UP to create the XDF from my BIN. The parameters above were from that XDF in TunerPro. What do I put for the primary and secondary?
You wouldn’t need to touch the primary and secondary. Only the Pulse Per Mile 99-00 I believe.
@@brandongarnold Thank you for the response, the tips, and for making these videos!!
I looked at a 2000 bin file with universal patcher and the pulse per mile doesn’t quite add up to equal they correct tire size. I’m not sure if it shows the incorrect number in the table or if it’s calculated differently.