Teyes CC3 360 Astra H
HTML-код
- Опубликовано: 10 июн 2022
- In this video I'll be going over some of my experience with installing and using the Téyes CC3 360 in my Opel Astra H
Special thanks to :
The XDA Forum :
forum.xda-developers.com/t/te...
The Drive2 Forum :
www.drive2.ru/search/?text=Te...
Кот на Земле :
/ channel
Александр Самарин:
/ @1samar1
Relevant links from the video
T'eyes Australia Firmware Update Page:
www.teyes.com.au/pages/tech-p...
T'eyes Russia CC3 Firmware Update Page :
cc3.teyes.ru/en/update.html
T'eyes Russia CC3 360 Firmware Update Page :
cc3.teyes.ru/ru/360/update.html
Unofficial CC3 360 Firmware Update :
mega.nz/file/fkhgVJ7C#Y38LRjr... 
Авто/Мото
Добре, че има и честни влогъри. Благодаря за видеото и поздрави от Ирландия 👍
Много благодаря за милите думи и добрите пожелания ;)
Pretty cool video. A thousand thanks for all your help of teaching us how to navigate the TEYES unit.
This is a lot of good information, thanks.
Great commentary and video.
Thank you for taking the time to watch the video and for your kind words.
Great video, thankyou!
Congrats for the video. A question: I have installed the Carlink Android radio in the Opel Astra H but I have a problem with the air conditioning which does not turn on either manually or from the radio. There is no power coming from one of the connectors (the gray one). To understand if the problem comes from the air conditioning alone, I removed the installed radio and reinstalled the old factory display. So I noticed that with the original display and with the original factory wiring used everything works well. Attention: the on-board computer is the DVD90NAVI model and my original air conditioner has 2 connectors for operation (grey and blue).Can you help me?
If I'm understanding correctly, you have installed an Android Multimedia / head unit in place of the factory screen ( Bid / Gid / CiD - these are the three types of displays for the car ) and you have left your original car radio / media ( DVD90Navi ) in its original location and connected ?
If that is the case, the issue is that the factory screen acts as a CAN gateway and if the car doesn't detect it, no power is sent to the AC system / panel, preventing you from using it.This means that if you would like to keep using your AC you would need to have the factory screen connected to the car. There are 4 ways you can do it that I can think of at the moment. #1 Use the same setup as me , remove the factory media and place the factory screen in its place. #2 Install the Android head unit in place of the factory media and keep the factory screen in its original place. #3 Move the Factory screen to the glove box or hide it somewhere inside the dashboard. #4 Move the factory screen to the ceiling.
@@ajninn the 3rd and 4th options are interesting but for the third there is the risk that the factory wiring for the factory screen is short to hide it where it doesn't create problems. For the 4th option I am not a professional installer to do certain jobs. Too complicated. It might be possible if there is a very detailed video for this method. Thanks anyway.
@@alpacinox3671 Well the Factory cables are actually are too short even for moving it in place of the DVD90Navi. Extending the cables seems and looks harder than it actually is. My recommendation is #1 disconnect the cars battery, take some painters tape ( some thing that doesn't have a strong adhesive / sticks too hard ) and a marker. Put labels on both ends so you know what cable goes where , cut the cable and extend them 1 by 1, slow and steady. I too don't have any professional experience with such things but little by little I managed to do this and add some other extras ( key-less entry / Start & Stop ignition button & frame-less self dimming rear view mirror ) to the car that I hope I could share in a video soon.
@@ajninn Today I reconnected the factory display and placed it behind the glove box. Unfortunately now the problem has been reversed...the air conditioning works but the Android radio doesn't turn on. Maybe it's time to have an expert check it out
good job. You're great
Hi do you know if you can use the original DAB from the car without purchasing a DAB kit from teyes? My car has DAB so I want to keep it as factory as possible.
Hi, just to be clear I'm not that familiar with DAB / DAB + radio , meaning that I may be completely wrong. But from what I know about the device, to my knowledge there is no way to connect a DAB / DAB + antenna directly to the device. You would need to get a USB to DAB receiver, it also appears that any USB adapter will work ( unlike other features locked to Teyes branded accessories - OBD2, TPMS .... )
@@ajninn thank you for the reply. I just received a reply from Teyes saying I might be able to retain the OMD dab+ antenna, but you need the USB dongle.
Thank you buddy
Hey! Just a quick question. Did you extend cable that goes to old orange screen (onboard computer)
Yes I did, they were way too short.
Great review. My cc3 not detecting sim card from the external simcard tray, any idea how to fix this . thanks 🙏
Hello, could you tell me if the BC functions such as errors such as lack of water, faulty light, and hidden menu can be seen even with the canbus
The only function that is lost with moving the factory screen lower in the center console ( replacing the radio ) is entering the secret menu.
I just got a very similar unit. I assumed it used the original radio connection but it seems to actually use the connection from the GID display. So i only had steering wheel function when the gid was not connected. If the Gid display is connected i dont have steering wheel funtion. Not sure if this makes sense but i want to keep the Gid working and have steering wheel controls
I'm not sure but gid connector consists only power and can bus wires - theoretically you could connect both to the same cable then both devices would use controls - at the same time unfortunately ;)
Nice and honest video. With carplay, does Siro work fine, including making and receiving phone calls? Do you know if Google assistant and voice will work with Android Auto?
Thank you for the kind comment.
Now regarding your question, Siri appears to be working fine for asking questions and making calls ( never used it to answer a call since it's way faster to touch the screen instead of saying " Hey Siri answer / answer the call ), in some cases I need to say the trigger word " Hey Siri " a bit louder. But that may be because I've placed my microphone a bit further than I should have. I believe that Android Auto + Google assistant should work without any issues. But I'll try to borrow an Android phone and test + make a short video for you. Let me know if you have any other questions :)
@@ajninn Thanks for the kind reply. If you are able to borrow an Android phone and make a short video, that would be much appreciated.
After your review, I am a bit hesitant about buying a Teyes - might check OwnIce K7 - but I like the UI design of the CC3 and their (apparent) continuous updates of the firmware.
@@moster67 I completely agree the CC3 has a very nice UI especially compared to other devices, that's one of the main reasons that I got myself one ( that and the 360 cameras ) But after going through all the issues I had, I would prefer going with a more reliable device and brand in the end. And also appologies for the late reply , I'm still looking into getting an android phone to test and capture some Android Auto footage.
Hi, could you please explain how you managed to connect the device (stereo) and the GID at the same time? The harness doesn't seem to give this option... 🙄
Yes the harnesses for android head units like this one require the GID screen to be disconnected so that they can use it's connector and be " properly " connected to the car. Unfortunately nobody has the desire to make a fully functional Can Bus decoder box for the Astra H & Zafira B with climate control. Resulting in you not having any power to the AC the moment the GID screen ( The screen acts as a Can Bus gateway ) is disconnected. So with the help of some people across the internet this is how I managed to have both the Android Head unit and the GID screen connected. To power on the Head unit you only need one cable from the GID screen connector, so connect the GID normally and add a single cable to make a bridge connection / Y splitter.
Here is a picture to help : photos.app.goo.gl/zLE3CpJbWgJSRmwVA (left side is the Android head unit , the right is the factory GID connector )
@@ajninn Thank you so much for your answer! Unfortunately, I have tried the connection you suggest (I've read every instruction you have given in your videos so far 😁) but for some strange reason it doesn't work! If connected to GID connector, head unit works fine. If I make a Y connection to the cables you show me, GID works but stereo remains off. I'm pretty sure I have bridged the correct cables that's why I'm desperate right now! Would you know if using a harness for the other type of cc3 (the one that installs where the original stereo was) will be a solution to my problem (no need to connect the GID plug to the stereo) ?
@@sarrisstratos I'm sorry to hear that you're having such issues. If I may ask, if you plug in all of the connectors of the Android multimedia to the car ( including the GID connector ) does the device power on ? If you have not tried it please do. If you have and it doesn't please check the other connector that goes to the CD 30 etc ( factory radio ) My first few tries when I was installing the Android device in the car I didn't plug that connector correctly and wasn't able to power on the device.Maybe the wiring on your harness is a bit different and that's why my suggestion is not working for you :/ Are you using a teyes CC3 or a different but quite similar device ? As for trying the other harness it ( the one for the installation replacing the factory radio ) it may have a positive effect. I personally tried that at the beginning but I was having even more issues with that one. The android device was registering phantom steering wheel button presses and wasn't powering on and off correctly ( it wouldn't turn off when the ignition was off )
@@ajninn Given that the head unit (CC3 2K) works if everything is connected to it (without the GID connected at the same time) I suppose it's not a matter of bad connection and your suggestion (bridging that specific cable) should have made total sense! Seems though that with the provided harness I only have two options: GID but no stereo, stereo but no GID. I can see that you were also troubled a lot during your installation! Now, the other solution I can think of is Y splitting all the GID connector cables, one by one, thus creating 2 parallel connectors.. Though I've ordered a second harness and see how it goes first (fingers crossed!). Once again, thank you for your interest!
@@sarrisstratos Creating a full Y splitter may work, I initially went that route.While i was able to get both of them working with it , it caused interference with the.GID screen.Resulting in no climate information being displayed on it. Maybe they have updated / changed slightly the wire harness for the CC3 2k release and that cable that i mentioned is on a different pin. If I'm not wrong I belive that single cable ( is a can bus cable ) is just needed so that the canbus decoder sees the car's canbus network.The CC3 uses the CD30 connector for most of it's required connections. :/
Hi, what are the differences between CC2L CC2 Plus and CC3? because there are like 200€ difference
Yes there are a number of differences. Some of the main ones that I'm seeing are :
#1 CC2 Plus & CC2L have not gotten any software updates or are not getting any anymore.
#2 The newer sleeker home screen interface ( launcher ) is only on the CC3
#3 Apple Carplay and Android auto is only available on the CC3 & CC3 360
#4 Android versions , CC3 & CC2 Plus is on android 10 while CC2L is on 8.1
#5 A lot of their accessories are not compatible with the CC2L
Here is a Comparison chart provided by T'eyes : www.teyes.com.au/pages/comparison-specifications
Let me know if you have any other questions.
Thank you for a nice video, there are a lot of information for potential Teyes customers, which are Astra H owners at the same time :)))
The question I am most curuious about: Is there an Astra’s original CD30 Settings buttons emulation? Interested in it to enter BoardComputer’s TEST MODE, which, afaik, is activated by LONG PRESS of Settings button on original CD30. So I am curuious - is there a “virtual” button of that kind?)))
Currently I have on my Astra some audio device from early 2010s with WinCE (hope you didn’t run away in fear at this point) and it emulates 5 CD30s buttons - up, down, OK, BC, and SETTINGS. But for settings it only emulates SHORT pressure, while I also need long. This is one of the reason I wanna get rid of this WinCE relic and buy something more functional…
Hi, thank you so much for taking the time and watching the video and commenting.Unfortunately there is no way ( at this time and to my knowledge) to control or enter the BoardComputer’s settings / secret menu / test mode via the Teyes CC3 / 360. While there is an application on the device designed to do that ( emulating the CD30 ) do to the device's poor compatibility with the car it's not functional. The only two ways I know ( again at this time ) to have the option to controll the BC are the following:
The first is to move the BC screen to the ceiling and have the factory radio in it's original location. The second which is the more desirable is to get a device + app called " DroidOnCar " . From what I'm seeing having this device connected to your car allows you to have all the BC information and control via an android device.( don't know if that means the original BC screen can be removed entirely ) But the biggest issue with this option is that the device is only sold in Russia and is only shipped to Russia, Belarus, Armenia, Kazakhstan and Kyrgyzstan :/ I'm sorry I couldn't give you a more positive answer to your question, my recommendation would be to look into other devices if you're interested in a device with good car compatibility.
Hi, do you know a metod to see if the AC is on/off without mounting the original screen? Thanks.
There is a device " droidoncar " that allows all of the information from the factory screen to be displayed on the Android Head unit / multi media. Unfortunately the device ( from what i know ) is only sold in small batches ( a few months apart ) in Russian with delivery only available to
Belarus, Armenia, Kazakhstan and Kyrgyzstan :/ And the factory screen still needa to be connected, but you don't need it to be visible ( hide it in the dashboard or glovebox )
Aa ok, thanks a lot!
Hi friend, can you please tell me what wires you have on small monitor(orange) and what on the other with canbus, this was a 32pin with 12 wires i think what you did and you have this result? im stuck on this level (but i want to take the small monitor to the top and radio still dont move it not like you but maybe you know
in case you tell me is 1 wire its ok that i saw from the other guy, but he have like 8 wires doing what, then 1 wire and where it goes this 1 wire and if you know for all this i will do same as he did (so i need for this 1 wire it must be the same 22 awg wire?)
@@ssokos Ok, correct me if I'm wrong but from what you posted I think this is what you want to do with your installation.
#1 Keep the radio in its original place / location
#2 Move the factory screen to the ceiling / next to the interior lights
#3 Place the Android head unit/multimedia at the top of the dash where the factory screen used to be.
First, you need to extend the cables for the Factory screen to reach your desired destination. Second connect a single wire from the factory screen connector to the android head unit/multimedia connector (the right side is the android head unit/multimedia, left is the factory screen connector imgur.com/a/zX4du8m ). In the other Person's video, you see that his connector has more than one cable, but in fact, he's using only one.
Like him, the first thing I did was to copy the factory screen connector 1 to 1 ( to have all the same cables ) and connect it to the multimedia. But that caused the factory screen not to display climate information. Afterward, I disconnected all of them except the one that he shows in his video ( as said he also is only using the 1 cable, the other 6-7 cables are disconnected, he just hasn't removed them from the connector)
Hope this helps, cheers.
@@ajninn thanks you man very good, thats you and for help to answering was and fast too:)
yes that i want to do like you said, so i have to extend all of this cables to go there top? and where this 1 cable goes? thanks
i think you said this 1 cable goes to the small monitor(orange) at any pin?
@@ssokos #1 Yes if you want to move the factory screen ( orange monitor ) you would need to extend all of its cables. The factory / original monitor needs all of them to work. The Android multimedia is the one that only needs 1 cable from the orange monitor's connector to work.
#2 In my first answer/post, I provided a link ( imgur.com/a/zX4du8m ) showing between what cables you need to make a connection.
Once you have extended all the cables for the factory screen ( orange monitor ) test to verify it's working fine. After that look at the image that I have shared, on the right side is the factory connector. Find the corresponding cable ( the one shown with X ). Once you have that cable do not disconnect it from the connector, just connect an additional cable to it.
#3 Take that cable and connect it to the one shown on the left side of the image.
@@ajninn very nice now i understand, so just i will take one cable from this the blue cable goes there you showing and then with all cables goes on extended small (orange monitor) and done, i will do i tomorrow to buy the wire 22awg i think is ok like this is same, thanks you for all my friend you helped me very much, i will send you when i will do it maybe tomorrow have a great time thank you.
Hi! Is it possible to access to the settings menu ("day/night mode", "time and date", "ignition logic", etc.) through some menu of the Teyes CC3?. Amazing video by the way, keep up the great work!
Thank you for commenting. Regarding your question, yes there are options for setting the brightness during the day and night , for setting the time and date plus what the device will do when you witch the ignition on. The last one is separated into two options one is for what the device will do when doing a full boot up and what the device will do after waking from sleep. If you would like I could try this weekend when I have time to capture some footage of these settings and post a video.Please let me know if there are other things you would like to know , and I'll do my best to help answer them.
@@ajninn Thanks for replying so quickly. Sorry because I wasn't very clear with my previous question. My doubt is about the settings menu that appears on the original GID (Graphic Information Display) screen. In my Astra I have the CID (Color Information Display), and I always have it on night mode. My idea is to do the same you did, install the original display (CID) in the location of the radio, but that means that I won't be able to change its settings. Does the Teyes CC3 let you access to this Opel settings menu the same way the original radio did?
@@ElChus Unfortunately no, while there is an app on the device intended to let you interact with your GID or CID display, due to the poor compatibility it's non functional. The closest I got was when using the canbus settings for the Opel Antara I was getting board / trip computer information ( distance traveled / estimated fuel range ) but compared to the information on the factory screen it was significantly inaccurate. And at a full boot up I was getting a pop up for AC controls , but those were also non functioning. As I mentioned in the video It's my strong believe that this device was not tested on the Astra h before releasing it on the market, they probably ordered generic canbus decoders and used the same canbus code library / database that all the other android head units use and called it a day. I don't think even the mounting frame is made by them ( not their original design ) . I'm sorry I wish I could have given you a more positive answer :\
@@ajninn I appreciate very much your honesty, even though that I was hoping to hear that it was compatible. I fully agree with your view, I also think Teyes didn't care as much for their versions for the Astra H, Zafira B... as much as for the one with the Astra J or Opel Insignia. I've seen videos of Teyes CC3 on those cars and it shows which door is open, climate info, etc. and it is amazing how well integrated it is, it makes me want to own one those cars instead. It's really a shame that they didn't put in the effort, because I prefer my Astra H than the +150Kg heavier Astra J. But despite all of that I am considering doing something really similar to your setup (I also own a 3D printer and make my own designs) but with the CID screen. I really enjoy listening to music, so I'd like to ask you some sound related questions. I've been considering the CC3 instead of the CC2 Plus because the CC3 has 5.1 channels (CC2 only 4.1) and will take advantage of the central speaker on the dashboard. Have you noticed the CC3 sounding through the central speaker? And how much the Teyes CC3 improves the sound compared with the original CD30 Mp3? Thank you again for taking time to answer my doubts, I appreciate very much your insight 😊
@@ElChus You're welcome , I'm happy that I can help anyone make a more informed decision before making a purchase. Regarding sound quality I personally have not noticed any degradation in quality compared to the factory audio setup. But I want to also mention that I'm not the best Pearson to comment on such topics , generally unless there is a significant downgrade in quality I'll not notice it or will take me a long time to do so. And for the center speaker I'm also unfortunately unable to comment since I believe mine is damaged and non functional. ( it was like that when I got the car last November ) but I'm intending to fix / replace it. And lastly regarding the 3d printed frame , here is a link to an existing design for the CID display : www.thingiverse.com/thing:4698697 hope it work for you ( if it dose please thank the creator for the good work :) ) . And once again thank you for the pleasant conversation.
Can you please confirm that the rear camera as part of the 360 set up also acts as the reverse camera or do you need another separate camera for the that?
Yes the rear camera ( that is part of the 360 kit ) acts as a reverse camera. But recently I have started to experience some issues with it. When reversing the rear camera would activate and show the rear view but frequently it would switch off or change the view and I would need to open manually the 360 camera app ( but even then it would turn off ). So I decided to check the wiring and make some changes to it. Now it looks like that the rear camera triggers every time when switching to reverse and keeps the view active until I go out of reverse gear. But soon afterwards I discovered a new issue.... the camera now doesn't trigger / activate / display it's view when Apple carplay is active :/
@@ajninn so did the require any soldering for it to work like that?
@@joysleep99No, I did not solder any of the connections. I just used electrical tape to keep the wires connected and held in place. There are only two connections needed , one from the reverse light positive to the camera cable and the second from the reverse camera cable to the CC3 360 wire harness. You also have the option to wire the side cameras to your turn signals , so that the side view is enabled when using your turn signals ( only require a single connection to positive to their side's turn signal ). The third option if you don't want to do any of that is to make the 360 camera app trigger via a steering wheel button. This option is only available if your car has analogue steering wheel buttons ( so that you can use the steering wheel programing / learning app ) if you don't have analogue buttons you can purchase external / wireless one.
@@ajninn right OK so did you have to purchase any extra cables or does the unit come with all the necessary cables in order to wire it to the two connections?
@@joysleep99 In some unboxings and on some sellers pictures I've seen that a long ( white ) wire comes included indented for the camera connections. But in my package there wasn't one. So in worst case scenario you would need to get yourself a basic cable ( nothing special ).
Can your help me. I am having issues updating my T’EYES ccc3. It says error and my screen is stuck there even if I restart the car.
Hey, apologies for the late reply, sorry to hear you're having such issues with the device. Now I have no experience with the exact issue you're currently facing but here is the following things that may be good steps to take.
#1 Reach to the seller for support ( personalty I've had poor experience with this step ) .
#2 Try to perform a " Firmware Forced Reset " they have a video on youtube how to do it.
#3 Check out the XDA forum - there are some people that are quite experienced and knowledgeable.
Hope you manage to resolve your issue, wish you best of luck !
Hi brother, i already plugged my Teyes CC3 and steering wheel buttons are not working, and i dont understand at all how did u solve? I have the standard CC3 and i tryed with all the canbus settings, but there is still not working, i didnt understand at all wich Firmware did u install to tix it
Did you test with the same canbus settings that I show in the video at 16:55 ? If you did, my next recommendation would be to go to the Teyes app to download and update the canbus. Once you have done this go to the canbus settings screen and scroll to the top and select the first option ( null on everything) After that restart the device ( hold the power button for 10 seconds or swipe from the top and select the restart option ) And after the device reboots go back in to the canbus settings and select LZ (HZ ), GM/Chevrolet/Opel , Remove Screen. Hope this helps.
@@ajninn Didnt work, i have questions. 1- In the screen of CanBus Update wich one should i donwload for update, the update one? The canbus one? Or all of them?
2- Should the large cable that is left be connected to the original car radio or should I leave it unconnected?
3- In the screen of Steering Wheel Settings its normal to have all of them on 255? Because i tryed to do something with the buttons and does not detect them, this just work with the external tool with buttons?
@@raulinnn11 1 download and install all of them . 2 Depends if you're keeping you're radio you can connect and see if it changes anything , but if you're not keeping the radio it's ok to have it not connected . 3 are you talking about this screen : photos.app.goo.gl/VejnELEAqcyXdvLN7 ? if so this does not work with the original steering wheel buttons it will only work with externa / wireless buttons ( analog buttons , the astra's buttons communicate via canbus / www.amazon.de/-/en/gp/product/B08MY3VTNG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ) 4 which cc3 did you get , the one that takes the place of the factory screen ( same as in my video ) or the radio ?
@@ajninn Bro, im still having problems, now the steering wheel buttons are working, but the airbag lights its on, if i disconnect teyes android and i connect my original gid, the airbag light come off, do u know what is happening there? Im literally crazy trying to solve that, but i cant
@@raulinnn11 I'm sorry to hear that you're experiencing such issues. Personally I did not have such an issue , but lets try and troubleshoot it. Now when did this issues ( the airbag light ) first start to show ? Before you were able to get the steering wheel buttons to work or after ? ( what was the last thing that you did before the light turned on ? ) . What finally made the steering wheel buttons work for your car ? When does the airbag light turn on , when you only have the CC3 connected and the Gid disconnected ? Or does it happen when you have both the CC3 & and the Gid connected to the car ?( How do you have the CC3 installed , cc3 on top + gid screen or cc3 + radio ? ) If you have both connected to the car did you use s Y splitter cable ? If yes is the splitter cable a 1 to 1 copy of the original GID connector ?
Здравейте, как мога да се свържа с вас на лично? Имам няколко въпроса, благодаря.
Здравей, може да се свържеш с мен на bufubgg@gmail.com.
Does cvbs output work how do I use it on settings?
Hello there! You seem to be the only person I can find on youtube with a 360 Model as well as steering wheel controls so I am hoping you can PLEASE do me a huge favor by checking something for me?
I am trying to find out what happens when you program a steering wheel button as "F Camera", "Rear Camera", and 360.
When you press a steering button programmed for F or R Camera, does it display the Front or Rear 360 camera view? Will it display until the button is pressed again to turn the view off, or is this a timed view that eventually turns off back to previous screen?
And the same for 360 Camera , will it display the 360 system until pressed again?
I hope you can help answer some of this for me. Thank you so very much if you can !
Cheers
Will check and get back to you.
Hey, so here is what I managed to find out when testing it on my car.
First of all, the most important thing to know is that the steering wheel button programming function is only for analog buttons, if yours are digital that use the can network you're not going to able to program them.
This is the same with my car, I had to purchase additional wireless buttons that I have mounted to the back of my steering wheel.
Programming buttons to the Camera Front & Camera Rear have no function/effect. I suspect this is if you have separate Front and Rear cameras installed instead of the 360 kit. Now when a button is programmed to the 360, a single press will launch/open the 360 camera app. You don't need to hold the button for it to remain active. A second press of the same button will return you to your previous screen, In my most often used case, I will be using Apple Car-play when I need the cameras I trigger them via the assigned button, the 360 camera app will be displayed on the screen, and when I'm done I press the button again and I'm back to Car-play. The audio is not interrupted( same for all, radio, calls, and other android apps via the head unit's android interface ) unless you have wired the rear camera to be triggered automatically when reversing + enabling the option via software. There are additional settings for triggering the 360 view from it's app. You have the following options:
#1 360 view opens + spin / look around when the ignition is switched on
#2 Automatically closing the 360 view if a certain speed is passed, by default is 25 km/h but you have the option to set that speed to your preference
#3 Automatically triggering the 360 when slowing down a certain speed, again it can be adjusted to your preference
#4 Triggering the side view cameras when using turn signals, for this, you need to wire the side cameras to your turn indicators and enable the option via software
You have additionally 3 ways of displaying the 360 camera app:
#1 Full screen
#2 As a widget on the home screen
#3 A pop-up window that can be moved around the screen
Hope this information helps, cheers.
@Hold_To_Crouch My Friend, you are the best ! Thank you so much for this information!!
The project vehicle I am working on will have a Joying 12.3" Radio in a custom dashboard and set to only display the app RealDash. Essentially a digital gauge cluster. (Testing shows that it can open any app upon startup and remain on the app unless you forcibly exit.)
Since the "gauge" screen is a android radio I would take advantage of the reverse camera inputs, and by use of a 4 way camera switcher with triggers, use it to display redundant front/reverse/side view cameras. Each camera will be a different view and location from the Teyes 360 system. (This is an American truck, so these redundant cameras will be mounted up higher than usual).
The Teyes cc3 360 will be in center console as my infotainment screen and 360 camera system.
I am also developing a custom steering wheel button layout which would be wired to turn on the front and rear cameras in the gauge screen and was hoping to also make the Teyes Front / Rear Cameras trigger as well. But unfortunately this function won't go as planned :(.
Perhaps what I can do instead, is have my steering wheel Front/Rear Cam buttons display the Front/ Rear Cameras in the gauge screen, and then turn on the 360 System in the Teyes screen (one button to both screens).
Fortunately I've created the complex wiring schematic for my original plan including resistors for each button. I can simply modify this to trigger the 360 System on the Teyes side and keep as is on the Joying side.
Ah sorry for rambling I am now thinking out loud here!
Thank you again so very much for this super helpful information!! It will help be immensely to plan my system ahead of time and be prepared when I can buy the Teyes radio!
CHEERS ❤!
@@HAMMER_2.2 Wish you all the best with your project :)
Сложих такава на опел мока но поради някаква причина не иска да се изключи дори и ключа да е изваден. Някакви предположения?
Освен да разгледаш руският форум drive2.ru за съжаление нямам. Предполагам че проблема може да е в кабелите който са дошли с устройството.И аз се зблъсках с подобен проблем повреме на инсталацията но с модификация на окабеляването се получиха нещата при мен. След цялото това загубено време и пари смятам това да ми е първата и последната китайска мултимедия за която ще дам пари.
@@ajninn Изключително много главоболия за нищо… паркинг сензорите също спряха да работят. Аз съм с автоматична кутия и като сложа колата на паркинг и настиска или отпусна спирачката започна да се чува едно прещракване.
@@spasspasov2594 Моят съвет е ако скоро си закупил мултимедиата от сайт като AliExpress или Alibaba( още не са минали 90 ) да пуснеш искане за пълно или частично възстановяване на парите ти. След близо 2 месеца + , некомпетентна техническа подръжда от продавача / производителя си поисках частично възстановяване на пари.
@@ajninn Казаха че е от канбус курията или окабеляването не ставало. Чакам да ми пратят нови ако не се случат нещата ще се поискам възстановяване на сумата която заплатих
Hi, does the Teyes come with all the needed connector cables?
Yes, depending on what car model you're ordering your unite for ,it should come with all the required cables and mounting hardware. The only exception is, if you're planning to use DAB / DAB + radio you would need to purchase an additional USB adapter.
@@ajninn Ordering for Astra H 👍
Can you tell me if it leaves the original bid screen wires untouched, so it can be moved elsewhere (to original stereo place etc)
@@TheManiac777 If you're ordering the top mounted one ( as shown in the video ) then you would need to do some modifications to the wires. #1 The wire harness that comes with the top mounted CC3 connects to the BID / GID / CID display cable, preventing you from connecting both the factory screen and the CC3 at the same time. Now to both working you can make a Y splitter cable ( get the screen connector with some wire from your nearest salvage yard or from some one selling an Astra H for parts and wire it in parallel with the exciting connector in the car ) so that both can be connected at the same time. Now the Teyes doesn't really require all of the screen connector wires to run , it only need one. Actually if you have climate control that is displayed on the factory screen, making a 1 to 1 copy of the connector will cause issues ( climate control will not be displayed on the factory screen it will look like this photos.app.goo.gl/akjKWjMWsmmkAVwQ8 ) The single cable that is needed can be seen on this diagram photos.google.com/share/AF1QipPaoRaJWNoUM6A_l6BylvfbQZHOyl9FzvMeOMjXwys400qyVvModiU11umlAcYHrA?key=RHpvbTlpOVNyUm1KOGNlZTFGZVVBXzBTY28tUFJB and in the following video ruclips.net/video/pAeopI05-BM/видео.html .
And #2 if you're planning to move the factory screen you would need to extend the wires.
Sorry for the long reply :\
@@ajninn Thanks for the replies.
Top mounted as in your video.
It's only a BID screen (NOT GID or CID) and standard heater, not climate control.
Does that mean I can splice a Y as you've said and move the BID to where the radio would have been (wires extended) and it work?
@@TheManiac777 In that case you shouldn't have any issues doing it. Let me know if there is anything else you may be interested regarding the device.
Just an update, the normal cc3 is now available with 360 camera....
Where would that be ? Checked around but did not see any updates regarding CC3 and 360 camera compatibility. But if that is truly the case, I feel even more confident in my assumption that the 360 camera feature was only software locked to make customers spend more money....
How do we get access to the 360 app, can I just purchase the 360 camera kit and connect it?
@@hussainsalam_ and @hold_to_crouch, its in the teyes website, but i really dont know how that works....
I amguessing now, but i think you to buy directly from them and maybe plug it in the usb port...
@@MiTraFilipesoares The camera kit connects to a dedicated port on the back of the device ( not via USB ).
And the 360 Camera kit product page still mentions that the kit is only compatible with CC3 360.
The following is from the Teyes website
" To order this upgrade:
1) Add this item to your cart
2) Add any CC3 package with minimum of 6GB RAM/128GB MEMORY system to have your CC3 upgraded to the CC3 360 automatically.
NOTE: Not compatible with any regular CC3 due to different a motherboard.
Not sure if you have a CC3 360? Please check the side of the CC3 or the its retail box for the 360 mark. "
@@hussainsalam_ If we're to believe Teyes, for us to have the the 360 camera kit working we would need to have a special model of the CC3 ( CC3 360 ). To get this special model we would need to purchase the most expensive CC3 ( 6gb ram + 128gb storage ) + the 360 camera kit at the same time... But as I mentioned in my video I have a strong suspension that may not exactly be true. I suspect that the 360 kit can work with the other CC3 models and the function is only software locked. But I'm not willing to spend another 300+ dollars to test that theory :)
Здравей, хубаво и полезно видео. Може ли да направим контакт за да те питам за още неща относно CC3 преди го поръчам. Наскоро взех Джоинг снапдрагон с същия интерфейс и е трагедия.
Здравей може да се свържеш с мен чрез емайл: bufubgg@gmail.com.
Is there an episode from “Parks and recreation” at 27:22?)))
Yes there is a small part used for a joke. :)
Hello ! The buttons below the screen, are they much hidden?
The physical buttons directly under the screen remain easily visible and accessible.
@@ajninn is the screen above them a bit?
@@ramka4186 If you're asking about the original car screen, it's a GID.
@@ajninn nop the original, i talk about teyes, does the screen hide the buttons a little bit
@@ramka4186 Technically yes, the screen covers / overlaps the buttons a little bit. But they are still easily visible and accessibly to you when in the driver's seat.
Hello could you tell k what is the code for the car settings meu
168
@@ajninn thank you hope to work
Can you share the teyes 360 app? I couldnt find it anywhere
The 360 app is part of their firmware updates, I haven't seen it be made available anywhere standalone.
Do you know what can bus box do you have?
Sorry for the late reply, here is a picture of the can bus decoder I'm using: photos.app.goo.gl/donntFnfRCvPbp4s7
Hello brother, I myself had some experience with Android aftermarker units mostly on Astra J. I must say, you did a great deal of good work making the Teyes work with Astra H. Seeing you video and reading all your comments, can you please comment on wether is there any better aftermarket unit than Teyes after all your experience for the past months? I ask because I like my Astra H more than the newer generations and I plan to keep it. Teyes was sofar the 'best' system I have come upon. There are other possible ways like Nexus tablet, iPad, etc. I am just curios if you came across a better solution for Astra H lately. Cheers, Jiri from Czech Republic.
Hi there Jiri, thank you so much for taking the time and watching the video & for the kind words. Now regarding your question, unfortunately, I can't give you the answer you were looking for. After this whole ordeal with getting the Teyes to an " acceptable " working state in the Astra H, I haven't spent any additional time looking into other alternative aftermarket units. While I'm mostly " happy " to have the unit and most of its features working now, I would have not purchased it If I knew in advance how much time and $$$ it would cost me.
Now there is no denying that the unit has some nice features that even big-name brands don't offer, an android device with a nice and clean multi-functional interface. But once I got it working I mainly only use Apple carplay and occasionally the 360 cameras.
А где можно купить нижнюю часть под бк
If you're asking about the mount for the original car display ( GID screen for fuel consumption / trip computer & climate control ) I made it using a 3D printer. Unfortunately nobody seems to be selling anything similar that can do the job. Alternatively I've seen a lot of people rip out the internals of the original radio and use it as a mount for the factory screen. Here is a link to the 3d files www.thingiverse.com/thing:5202402 , just to warn you they are not the best ( I'm not that experienced with 3d modeling and fabrication ) Just do not make the same mistake as I did and print it in PLA, make it out of ABS for better hear / temperature resistance. Hope the info helps.
Hi @@ajninn the link doesn't work anymore. Could you please share a new one ?
@@aza9826 www.thingiverse.com/bufu_bg/designs
not all 128gb cc3 support 360 cameras?
We'll if we were to to believe the manufacturer ( T'eyes ) the 360 cameras are only compatible with the CC3 360 device. And the only way to get it is by purchasing both a 128 / 6gb CC3 and the cameras at the same time. In my humble opinion this process is a bit dumb. Now the sceptic in me would say that there is a reasonable chance that not to be true. It's my suspicion that really the camera compatibility is software locked by the device firmware. Now to be clear this is My personal suspicion , I have no way to prove that unless I had a standard CC3 to test. And I'm not willing to spend a few hundred dollars to test my theory :D . Please let me know if you have any additional questions, I'm happy to share any information I have.
@@ajninn i bought the 6/128 version and it doesn't have the 360 camera icon. i only show the rear camera. There are two switches in the factory options from the 360 camera options, but that doesn't change anything. I guess I'll turn the 360 cameras on alli. I sent inquiries to technical support, we'll see what they say.
@k3fir The 360 camera app ( or as they've named it 360 panorama app ) is installed via the CC3 360 firmware. When I got my device and I started experiencing all of my issues I wanted to do a software update to try and resolve them. But at that time T'eyes was not offering any 360 firmware updates, and they weren't saying anything about device-specific updates. So without knowing I updated my CC3 360 with the CC3 firmware and as soon as the device booted up, it saw that I had the 360 camera app and deleted it, and I was unable to use the cameras ( even the back one as a reverse camera ). After realizing what happened I reinstalled the 360 firmware back on the device and the camera app was reinstalled and the cameras were working again. So if you're willing to test if this is true you'll need to get the cameras and try to install the CC3 360 firmware on your CC3.
I have seen an opinion that 360° option is a hardware feature and is limited to “native 360” version since it has additional cooling facilities installed, without which “regular” cc3 will experience overheating
@Victor Pichuzhkin While that could be the true, I don't think it is. From what I'm seeing both the CC3 and CC360 are using the same cooling setup ( same heat sink and fan setup ) and since both are using the same CPU / GPU I don't think the feature is restricted to one device because of thermals/cooling. If that were the case I would think that Teyes would be advertising that fact and using it as a bigger justification for why the cameras are only compatible with the 360. But again I could absolutely be wrong :)
Do you know the part number for cable?
The part number is ZSB 967597-1, but you don't need the entire connector. You only need a single cable to make the CC3 work ( photos.app.goo.gl/VUdghYRU456QCZCr9 / ) you can get a female jumper cable ( photos.app.goo.gl/KcT5QBKGvB1ermGWA ) and connect it to your existing screen wire harness/connector and just plug in the female end to the correct pin on the CC3 connector
@@ajninn
Doesn’t lose any functionality on the headunit with just one cable, right? The connector is the same with the connector from clima control
@@user-ic2iq1vg2d Since from the start the CC2 CC3 and 360 have poor compatibilaty with the Astra h you're not gonna lose any functionality. Actually if you make a 1 to 1 copy of your screen cable you're going to loose a abilaty to see the Climate / Heater information on the factory screen ( photos.app.goo.gl/Jg2UEH5whsc9ApB67 ). Also the CC3 is offered for mounting in place of the CD30 and comes with a wire harness that doesn't require the factory screen connector.
@@ajninn I don’t have the cd30, I have Android headunit in that position but it’s not the best position. That’s why I’m looking for something that goes to the gid position, much better. I ordered navifly m300s through aliexpress from Poland for 337€.
Another question, how you fit the antenna connector? I’m the video you say the space is limited
@@user-ic2iq1vg2d I had to cut the back end off and solder the wires
is this still working for you?
Yes, I'm still using it in my car. Currently I'm changing the way the gid ( factory screen is mounted. I redesigned the parts so that there is atleast space to have storage for phones on the two sides of the screen ( bottom screen / center console)
Братленце българин ли си?
Кое ме издаде, Плевенската регистрация или фалшивият Английски акцент :D ?
@@ajninn всяко едно радио беше българско 🤣
@@ajninn Абе да те питам просто дали си струва да си го кажем като наши хора 🤣
@@boyanzinoviev8181 @Boyan Zinoviev Честно , не си заслужава парите особенно ако става на въпрос да го слагаш в Астра Х.
@@ajninn точно с такава съм брат мерси много все пак видеото е супер наистина всичко си каза евала💪
"I'm sorry for being negative" : don't be, you bought a product and the support for said product was a pain in the ass. That's not really your fault.