i collect the tomy trackmaster stuff and i see trains that just wont budge a LOT the best solution thats nice and easy is over volting i like to you 5v from an old usb phone cable but you can use two batteries for 3v or even a 9v would work so long as you only use the 9v once or twice, but cutting off the end of a cheap and nasty usb and using the power from that will wake him right up
You could try jump-starting the motor with a 9 volt for a short time to power through where the motor brushes have sat and tarnished against the commutator... or try backdriving the motor while powered, turn it on and try to move the wheels or even better the motor shaft itself since that will bypass the slip clutch that usually slips when you try to backdrive the wheels.
I almost forgot buttchop traded you for this. Sadly he’s been inconsistent because renting apartments is difficult. He used to be on livestreams all the time. Not a fan of Thomas being a c11 instead of an e2
ruclips.net/video/Uu9gvVVlRgI/видео.html The engine is shown to be running in this video but I think it probably has a broken axle gear because it seemed to be slipping a lot on the curves.
Here’s the video where it was still working ruclips.net/video/Uu9gvVVlRgI/видео.htmlsi=uBgETlcGvsN5zyIm
the moter needs to be replaced
There was a Tomy Plarail version of the Oigawa Railway's James too. I don't remember you having that one.
I didn’t have it. It must be less common
i collect the tomy trackmaster stuff and i see trains that just wont budge a LOT the best solution thats nice and easy is over volting i like to you 5v from an old usb phone cable but you can use two batteries for 3v or even a 9v would work so long as you only use the 9v once or twice, but cutting off the end of a cheap and nasty usb and using the power from that will wake him right up
You could try jump-starting the motor with a 9 volt for a short time to power through where the motor brushes have sat and tarnished against the commutator... or try backdriving the motor while powered, turn it on and try to move the wheels or even better the motor shaft itself since that will bypass the slip clutch that usually slips when you try to backdrive the wheels.
@TrainTsarFun there is also a plarail oigawa railway James in existence.
Thank you. It’s going to cost twice as much as the Thomas version - should I get it?
Absolutely! It’s a great model!
Nooooooooo it's such a shame this is broken :( I hope it can be fixed
Awesome video jaabo I also have the plarail oigawa Thomas and I have oigawa railway James also
Nice! Owigawa is pronounced oh-wee-gah-wa
I wonder if one of the gears in the motor split
I almost forgot buttchop traded you for this. Sadly he’s been inconsistent because renting apartments is difficult. He used to be on livestreams all the time. Not a fan of Thomas being a c11 instead of an e2
Spray the motor with electronic cleaner..Sometimes these need a wake up..
ruclips.net/video/Uu9gvVVlRgI/видео.html
The engine is shown to be running in this video but I think it probably has a broken axle gear because it seemed to be slipping a lot on the curves.
Noooooo not the legos
とても良い
It’s pronounced Oh-ee-gah-wah.
buy a new one