Had a customer with a double grip harvester that kept breaking drive wheel mounts. Finally caught him grabbing the tree up high and forcing it down to cut it low. This was the owner doing this.
Das macht er auch nur weils/wenns sein muss oder. Weil 1.ist es sicher keine Freude weil er viel herum scheissen muss und 2.erfolgt das entasten auch nicht optimal und jemand muss mit der motorsäge nacharbeiten. Sonst gute arbeit. Gruß aus Niederösterreich
@Tree Killer Harvester killed tree Tree autocasts `Less oxygen for you` on Guy in harvester Tree dies Guy in harvester goes home Guy in harvester gets old Guy in harvester have low oxygen! Guy in harvester have low oxygen! Guy in harvester have low oxygen! Guy in harvester dies.
Schneller ist relativ ...das mit dem Keil hier ist eigentlich nur Spielerei. Es reicht wenn du vorne einschneidest und von hinten ... den Rest drückst du mit dem Kran. Und günstiger ist auch relativ ... wenn das Ding einmal da ist und du keinen Mann mit Säge in der Nähe hast , machst du es halt mit der Maschine.
It would be reluctant to put up a vid like this, sometimes you do what you have to do but the head is too small to be effective, the stump height is not sustainable and there is a resultant recovery loss that most customers would not be comfortable with.That method of scarfing looks tricky but seems slow and less effective than say front 3 cuts.
You can't swing an H10 on a Bear, never mind an Ergo!!! But you are right, this head is far too small for the tree but there is good cubic meters in the tree so it is sort of worth it i guess??
Ha ha they actually tried to hang an H10 on a bear with a C6 and Pekka ( President of Ponsse North America) told us the crane looked like a banana when they got done! Even a H8 would do quite well with this tree.
Ist doch egal. Interessante Technik finde ich ist es schon, man braucht eine gewisse Kreativität um den schneidkopf so zu bedienen! Ist meine Meinung. 👍
cutting pines like this one with this small "hobby" harvester is shame... Why don't you use a correct one? Germany- its home for one of the Komatsu's factory . The 911,931,941,951 are really good harvesters :) I work on a new 911.
This ergo with a c5 and h7 can outdo or hold even with the best komatsu has to offer. Put an h8 on it or get a Bear, and it will run circles around any komatsu. This is not "hobby grade" by any stretch of the imagination
Had a customer with a double grip harvester that kept breaking drive wheel mounts. Finally caught him grabbing the tree up high and forcing it down to cut it low. This was the owner doing this.
Glad it’s not my mashine
Ich würde mal sagen, das geht mit der Hand bei einem Baum dieser Größe schneller und billiger....
Good job
Das macht er auch nur weils/wenns sein muss oder. Weil 1.ist es sicher keine Freude weil er viel herum scheissen muss und 2.erfolgt das entasten auch nicht optimal und jemand muss mit der motorsäge nacharbeiten.
Sonst gute arbeit. Gruß aus Niederösterreich
I love cutting trees. I meant the fella on the machine had a hard time with the tree
its too big for harvester, why now to use chainsaw?
These thing are pointles for to big trees
@Tree Killer Yea you hawe write. But think With Chainsaw be more easy and not so difficult like with Harvester
@Tree Killer
Harvester killed tree
Tree autocasts `Less oxygen for you` on Guy in harvester
Tree dies
Guy in harvester goes home
Guy in harvester gets old
Guy in harvester have low oxygen!
Guy in harvester have low oxygen!
Guy in harvester have low oxygen!
Guy in harvester dies.
As someone who gets paid by production, it's much faster to cut it with the harvester, not to mention the safety factor.
You need a bigger harvester
Bei so einem Baum ist der Mann mit motorsäge schneller und vielleicht auch günstiger wie mit dem harvester
Schneller ist relativ ...das mit dem Keil hier ist eigentlich nur Spielerei. Es reicht wenn du vorne einschneidest und von hinten ... den Rest drückst du mit dem Kran.
Und günstiger ist auch relativ ... wenn das Ding einmal da ist und du keinen Mann mit Säge in der Nähe hast , machst du es halt mit der Maschine.
It would be reluctant to put up a vid like this, sometimes you do what you have to do but the head is too small to be effective, the stump height is not sustainable and there is a resultant recovery loss that most customers would not be comfortable with.That method of scarfing looks tricky but seems slow and less effective than say front 3 cuts.
I agree with you he's trying to show off doing that cut to feel the tree he wrapped the hoses as well.
What you need is a Husqvarna 266 SG. Or you could get two for the price of that machine.
Wird diese Fälltechnik eigendlich so gelehrt oder ist fas eine Eigenkreation?
„Eigenkompostion“ 😆
Well.. That is stupid..
Jag är glad att inte jag ägde den där skogen, eller maskinen med för den delen😳
Have you tried farming sim 17
Wo kommst du her??
Just use a bigger saw head! Like this one - PONSSE H10
You can't swing an H10 on a Bear, never mind an Ergo!!! But you are right, this head is far too small for the tree but there is good cubic meters in the tree so it is sort of worth it i guess??
Ha ha they actually tried to hang an H10 on a bear with a C6 and Pekka ( President of Ponsse North America) told us the crane looked like a banana when they got done! Even a H8 would do quite well with this tree.
Em qual estado do Brasil tem essa máquina
And I thought you can only use saw when you hold tree in the head.... cuz of security.
Looks like a waste of fuel and u wasted a lot of wood there
Goodbye Lumberjacks
Yeah ! Made in Finland
Чё то этому коню ещё учиться надо как правильно работать машиной,
Quel gâchis !La forêt ça se respecte
Why so mock the machine?
PonssePorn!! 😁
Wrong tool for the job. Just waste whole bunch of good wood.
Was thinking the same thing That's just lazy
Die Maschine ist hier definitiv nicht geeignet, sowas muss man manuell machen. Da hat man auch viel weniger Verlust!
Такой пиловочник испортил, нашинковал каких-то коротышей(((
Но если на бумагу - то тогда норм. :)
На паркет может?
Be alright if the saw head was bigger for larger 🌳
Could have cut ten of those other trees by now
I did for 15 years
Take down was wonderful, but preocess made me cry... hahaha nice video!
Ponsse ist sicher eine gute Maschine nur die Fichte war etwas zu groß! Werbung ist das keine 🤔
Ist doch egal. Interessante Technik finde ich ist es schon, man braucht eine gewisse Kreativität um den schneidkopf so zu bedienen! Ist meine Meinung. 👍
Cutting off right foot if good wood has hit to be expensive as hell .
Eight
Да парню ещё учиться и учиться.
ya murdered that 🌲 what a waste
A máquina não foi feita para trabalhar com êsse diâmetro de madeira.
Que chapuza,tardo yo menos con la motosierra.
Лес портит!
Noch Power the ponse
Powersaw the answer
Столько матерьяла перевел
Sérieux avec un tronçonneuse tu le fais plus propre et deux fois plus vite . Vraiment pas faite pour des grosses bille ces bécane
Way to high
Peccato un prezioso pezzo è perso
Drei null Schnitte alles klar nur um zu zeigen was die gute Maschine nicht kann
ThuerosToronto2
Hier versagt die moderne Technik
Насрал Насрал.
That's why they have LogMax 7000. Even 6000 has way better power
Слабый.
Не умеет. Одним резом спилил и обработал бы. Работаю на понссе голова н6
Дерево в голову не влазит вот и пилит со всех сторон)
Слабовато. Это не работа.
chain saw faster
7 minutes with a harvester, over 20-30min with a chainsaw. Yeah might be easier with the chainsaw.
Und wer bezahlt sone scheiße?
?
Alter was für ein rumgewürge.
Wasn’t split till u f it up
cutting pines like this one with this small "hobby" harvester is shame... Why don't you use a correct one? Germany- its home for one of the Komatsu's factory . The 911,931,941,951 are really good harvesters :) I work on a new 911.
lol, you think a Komatsu can compete against a Ponsse? Just wow!
Im pretty sure ponsse has the strongest crane and biggest harvesterhead out of the 3 manufactrers this just wasnt the right one
This ergo with a c5 and h7 can outdo or hold even with the best komatsu has to offer. Put an h8 on it or get a Bear, and it will run circles around any komatsu. This is not "hobby grade" by any stretch of the imagination
Good job