Installing and Configure VPN-Server on Windows Server 2019 / 2022 | Complete Step By Step Guide👍
HTML-код
- Опубликовано: 19 авг 2024
- In this video, I explain to you step by step how to install and configure VPN-Server on Windows Server 2019, and you can use these steps on Windows Server 2022. The way to set up a VPN server has virtually not changed in many years, which means that the same instructions for configuring a VPN on Windows Server 2019 apply to older versions, including Windows Server 2016, 2012 R2, and earlier. In this guide, I explain to you the steps to set up a VPN server in detail on Windows Server 2019, and I also explain to you how to create users on the server and how to create a physical connection to the VPN server from any computer connected to the Internet.
Typically, organizations use a VPN to extend their private network to allow employees working from home or another remote location to access files and applications, through a public network as if they were directly connected to the company network. In Windows Server 2019, a virtual private network (VPN) is a convenient way to allow users to access resources using an encrypted connection from a remote location and across the Internet.
The steps are simple and you can follow the steps as in the video. I am waiting for any inquiries in the comments.
----------*****----------------------*****----------------------*****-------------------------*****-----------------*****----------
#howto #windowsserver #windowsserver2019 #windowsserver2022 #windowsserver2016 #vpnserver #vpn #vpnworking #activedirectory #domain_controller #domain
Installing a VPN-Server on Windows Server 2019,
Installing a VPN server on Windows Server 2022 / 2019,
How to Create a VPN Server on Windows Server 2019 / 2022,
How to Add Remote Access Feature on Windows Server 2019 / 2022,
How to Install Remote Access Feature on Windows Server 2022 / 2019,
How to Install Direct Access Feature on Windows Server 2019 / 2022,
How to Install Routing Feature on Windows Server 2019 / 2022,
How to Enable Secure Socket Tunneling Protocol Rule on Windows Server Firewall,
How to Disable Secure Socket Tunneling Protocol Rule on Windows Server Firewall,
How to Set Up Routing and Remote Access Server on Windows server 2019 / 2022,
Enable or Disable Rule on Windows Server Defender Firewall with Advanced Security,
How to configure Routing and Remote Access Server on Windows Server 2019 / 2022,
Routing and Remote Access Management, Set Up Remote Access on Windows Server,
How to Configure and Enable Routing and Remote Access on Windows Server 2022 /2019,
How to Start Service of Routing and Remote Access Server on Windows Server 2019,
Routing and Remote Access Management Console, Remote Access,
How to Add Static Address Pool on VPN Server on Windows server 2019 / 2022,
How to Add IP range for your VPN network on Windows Server 2022 / 2019,
How to Authorize Users to Connect to Your VPN Server on Windows Server 2019 / 2022,
How to Connect to a VPN Server on Windows 10,
How to Connect to your VPN Network,
How to create a connection to the VPN server network,
How to Add a VPN connection on Windows 10,
How to Add a VPN connection on Windows 11,
How to configure a connection to the VPN server network on Windows 10,
How to Create a VPN User on Windows Server 2019 / 2022,
How to add VPN role feature on Windows Server 2019 / 2022,
How to set up VPN server on Windows Server 2022 / 2019,
How to allow VPN connections through firewall on Windows Server,
How to allow users access through VPN on Windows Server,
How to set up port forwarding on router to enable VPN access,
How to set up a VPN connection on Windows 10,
How to set up a VPN server on Windows 10,
How to use Routing and Remote Access on Windows Server 2022 / 2019,
Connections to Microsoft Routing and Remote Access server,
How to properly configure a VPN Server on a Server 2019,
How to set up PPTP/L2TP VPN on Windows Server 2019,
How to Set Up a VPN on Windows Server 2019 using Remote Access,
How to Manage VPN in Windows Server 2019 / 2022,
How to Setup OpenVPN On Windows Server 2019,
How to Setup OpenVPN On Windows Server,
Windows Server 2019 L2TP VPN,
Windows Server 2019 VPN Installation and configuration,
Windows Server 2019 How to setup a VPN server using PPTP,
Installing Remote Access VPN (PPTP) on Windows Server 2019,
Site to Site VPN to windows server 2019,
Configure VPN On Windows Server 2019,
----------------------------------------------------------------------------------------------------------------
Can See More Videos: / @doitmostafaahmed
----------------------------------------------------------------------------------------------------------------
Music In Video : www.youtube.co...
-----------------------------------------------------------------------------------------------------------
Thanks for watching
Please Like and Subscribe
Thank you for the support
SHARE, SUPPORT, SUBSCRIBE
Good info, thanks for the best share
Thank you for your comment. I hope you subscribe to my channel. You may find other information useful. Good luck to you sir 🤍
Once i got out the network and try to connect to the VPN now, it cannot connect.
I encountered an error:
"Can't connect to VPN_Connect. The remote connection was not made because the attempted VPN tunnels failed. The VPN server might be unreachable. If this connection is attempting to use an L2TP/IPsec tunnel, the security parameters required for IPsec negotiation might not be configured properly."
Could you suggest any solutions for this issue?
what append if i dont use NAT?
Once you set up this vpn sever you can still have local only users as well as vpn users correct? Would you be able to access that mapped drivers from home, Just like if you were at work?
Thank you. When you say server IP address, it means the public IP? Also does it work with Windows Server Standard edition?
I also thank you for your comment. Yes, it will work with Windows Server Standard edition. Good luck to you 🤍👍
For the private address, do we need to insert the 127.0.0.1 or we can insert other private address. And how to determine which privaye address need to use. Sorry for my question as my knowledge on network was little.
No, 127.0.0.1 is a loop back for the NIC. use whatever range (11 IP) based on your gateway IP
Thx for your video, I m trying to do the same for my work. But, do I have to open some ports on my router ? some NAT rules ?
Thank you for your comment. Regarding your question, you do not have to open any ports on the router. The features available in Windows Server will forward the connection ports. But keep in mind that I used a local IP address just for testing. In reality, you must work and communicate through a real IP address. Good luck to you . Try it and I will wait for any inquiry from you. We discuss your inquiry together. Thank you again 👍
Do you need active directory for that or you could setup a local user?
Yes, you need Active Directory in order to create a user on it and give this user the authority to access and connect through the VPN. Thank you for your comment, and I await any further inquiries, sir. Good luck to you 🤍🤍
While routing and access is active i cant ping through (from pc to server though can still ping from server to pc) although when i disable it i can ping both ends from each others. (that said vpn also does not connect) this is also made simplified in local network that has internet access.
Any advice on why that is ? (ive had working vpn on lan but not wan before but after including routing and doing the steps you provided i cant access my vpn server through nether now) (ive also disabled firewall when testing just in case there was something i forgot to let through)
Update i can ping both sides now (idk what i actually did to make it so but i still cant connect to the vpn)
do you need wan network to do VPN ?
Hello Rana, the VPN server needs a real IP, so that you can connect to it from any remote computer. But it does not require a WAN network. I just tried with a local IP just for the experience. But for actual work, there must be a real IP, or as it is called, static IP address. I hope that the information is understandable to you. Thank you for commenting. Don't hesitate to ask about anything else. Sorry for the delay in a reply . Thank you again 🤍👍
Hey, I would like some help! I've been struggling with the following:
My customers can connect to the VPN, however, they cannot ping one of my server's interfaces. They only ping the interface that is created within the VPN pool.
So, if my server has an interface configured in the 192.168.20.x network, and I configured our VPN pool at the 192.168.10.x network, our customer can only ping the 192.168.10.x address.
Aren't those interfaces internally routed? Why my customers can only ping the VPN address?
Ikev2 ??
Sorry, I don't understand what you mean, sir