@@josephdezusa Stainless steel sensor best for water level controller problem only happens if sensor cable cut or rusted at during not insulated properly nearby tank
we need a level controller when the water level is high the motor will start. when the water level is low the motor stops this type controller we need can you suggest me
Very good video. Can I use IT80wlc device with both neutral shorted. We have motor in ground floor but the switch for the motor is located in top floor. Switch only controls phase.
Nahi. Mai khud ise use kar raha hu.nor aap company se confirm kar sakte he . Ya fir float sensor wala model le sakte he use bar bar change bhi nhi karna padta he
@@SandeepAgarmorTutorial thanks. I have connected the IT80WLC and it works with submersible pump but seems the censor is not powerful enough to force the pump to push the water up-to 3rd Floor. Is there a way to boost the censor as usually with starter water easily travels until that height but now with censor it is only able to push the water until first floor and water isn't reaching the tank.
@Sandeep Agarmor Tutorial In this video only you said that IT80WLC can be connected with starter motor. In amazon site somebody replied it cannot be connected with starter motors. Is it true?
Hi sr output connection kase krange starter ke sath starter ka output N,P dono ka wire nikal ke kit me laga dena hai ya Starter ka N,P me v connection wire rahega aur again us me se 2 wire nikal ke kit ka N,P me connection kerna h
motor ko manual mode pe chalu kr ke auto mode pe switch kr de to tank full hone per band ho jeagi kya motor ... kyuki motor tavhi on hogi na tvh water level end mein hoga otherwise on he nai hogi islie pucha.... and alarm bolaega kya full hone per ??
AAP is controller me aisa nahi kar sakte he . isi me dusra model ata he. isme alarm nahi he. Dusre controller ka video dekhe ruclips.net/video/ylMHnFe9xBw/видео.html
Its nice video shooting and editing but need to advice you something small but important points. 1. Have to advise THREE way TOP instead. In Two way N & P can be change any time. 2. While fixing sensors FIRST you have to fix inner terminal instead. So you can identify your connection done properly or not and no chance to lose connection also.
Agar on off ek hi switch se hota he to ye automatic motor on off kar dega. Or agar on ka or off ka switch alag alag he to iske liye dusra model he . Is video ko dekhe ruclips.net/video/q9b-OZLyq2o/видео.html
You can use it as semi-automatic. You will have to start motor manually and the starter will stop it automatically as soon as tank full. Their is another model for submersible pump which have starter with running and starting capacitor.
@@SandeepAgarmorTutorial thanks sir. I can used this model . But for starting it is manually. And motor will stop automatically. With sensor put on the tank. am I right sir
@@SandeepAgarmorTutorial how to install IT80WLC mai buy kar chuka hu ab fit karna hi padega 1 hp ka submersible pump hai aur green red wala on off switch hai
Very nice video. Very well explained. But I few doubts. Our building is two storey and the tank is on the second floor level and it's a cement constructed tank and capacity is catered for 2 houses. Now the wires will go all the way from ground floor to the third floor level so much of wiring is to be done. Isn't it? Is my understanding correct? And these wires must cater to the weather also. Next once u place them, we can't close the tank using lids. Since ours is cemented the lid is also cemented. Then the wires tend to damage. So is there any solution for these things? Pls clarify.
Yes you will have to use long three core wire upto the tank from starter. And you can drill hole in tank cemented slab which you used as tank cover. You can also install wireless water level controller instead of this wired water leel controller watch this video ruclips.net/video/4JJ7ObH3Bnc/видео.html
If your borewell motor start and stop by same switch ,then yes you can use this upto 2hp motor, but If start and stop switch are different then you can't use this wlc, there is another model for that starters
Sir, My overhead tank is at 100 ft hight I would like to use your IT180 wlc. Can your product work on same height if it possible then please tell me cctv cable wire work or not for both overhead tank as well as ground water tank.Also provide me cost and specification of 90m wire along with your very nice product. My tank captivity is 20000 lit.
Sandip sir... your video is very good and knowledgeable..I watched your every video..sir one question about this video..can you please let me know...senser ke liye telephone wire bhi use kar sakta hu. Jo ki 0.1 mm ka hota hai....????
सर जी आपने ये नही बताया की WLC का output statar मे कहाँ देंगे ? अगर statar मे direct देंगे तो statar मोटर को auto start नही करेगा , स्टार्ट करने के लिए start butan पुश कराना ही पड़ेगा ?
@@SandeepAgarmorTutorial sir hamare basement me pani bhar jata h to esa controller chahie jo paani bharne pe motor chalu ho jae or khali hone pe band pls help
में आपका प्रोडक्ट WLC फ्लोट स्विच के साथ खरीदा है।में इस्टालेशन करना चाहता हु ।मेरी समस्या है के में WLC का out put पेनल के in put में देता हूं तो मुझे स्टार्टिंग कैपेसिटर का push बटन कुछ सेकंड के लिये दबाना होगा।नही तो मोटर स्टार्ट नही होगी इस समस्या का समाधान बताये।
If water level goes down and it will switch on the motor will it also detect that water is coming or not from motor, because if I talk about water motor attached with normal government supply water connection which generally supply water two times in a day, will it detect that water is available in supply pipe to start motor or not ??
I have a problem with water level .there's no power and indicators. I'm searching to contact u for service..please guide me to service. It's just two months only I purchased
I really appreciated your work....if you don't mind i have one suggestions.... Please install middle indicator light as a yellow/blue light so it can easily get noticed when the water level on medium level because 2 light of same red color wouldn't easily register in your mind while you roaming in the house. (Just a phycological thing) All the best
पर आप ने ये नही बताया कि MCB टाईप स्टार्टर मे WLC के output का कनेक्शन केसे करना है.. स्टार्टर के input मे देना है या स्टार्ट के NO element मे कही करना है..
मेरा स्टार्टर नये टाईप का है. उसमे सिर्फ़ दो स्विच है. एक mcb और एक स्टार्ट (green push button). सिर्फ़ mcb ओन करने से भी submersible पम्प स्टर्ट हो जता है. तो उसका connection समझाये..
Thanx rspctd sir,aap ji ne her point ko bahut achhi tarah clear kiya hai,God bless you
Cotton shirts for
Masha Allah bahut behtarin tarike se bataya aapke Samjhane Ka Tarika bahut pasand hai 👍 🇮🇳
Thanks
Thank you Sir !! Simple and clear to understand your video!!
thank you sir app bahuttachha sikhate hai
Sir which type of WLC is required for motor with star delta starter. Please explain with connection
I subscribed the channel only for your brief explanation...
Which is best for water tank, float switch or water level controlar...!
Float switch with water level controller. Watch this video for more information ruclips.net/video/JGWTtsC6R60/видео.html
@@josephdezusa Stainless steel sensor best for water level controller problem only happens if sensor cable cut or rusted at during not insulated properly nearby tank
Bahut accha laga sir
we need a level controller
when the water level is high the motor will start.
when the water level is low the motor stops
this type controller we need
can you suggest me
If we want don't wanna install G1 sensor then can we remove it to turnoff (automatic turn on system)
Please contact customercare
Kya eh dry run protect kartaa he jab ki esme microller use kiya he batayajaarahahe
Nahi
Bhai ek baat btao ki kis level tak pani jane par ye on hota h? Aur kya 6 flats ki 3 tanks ke liye ye shi rhega?
Red green button wale starter ko nahichalta ye, konsa starter laga na chahiye
सर जी इसमें क्या सिलावट स्विच भी लगाया जा सकता है 3 वाले सेंसर के ऑटोमेटिक अलार्म में
Summersable me lga sakte h
Automatic stature ko on kare ga kya ???? Help me
Sir please tell me video as well as price of wireless dual water level controller
Mera pump ta switch jo ki ek mcb hain.. woh 2nd floor pe hain.. uske saathe is switch ko kaise jode?! Usme toh sirf live wire hi hain?
Very good video. Can I use IT80wlc device with both neutral shorted. We have motor in ground floor but the switch for the motor is located in top floor. Switch only controls phase.
I will not recommend. You can contact to customercare
Sandeep ji ! kaithood rod ki jagah flooting switch ka use kar sakte hain kya same controler (wlc) ke saath ?????🙏🙏🙏🙏
Ha. But connection thode different rehte he . Aap hamare channel par float switch ke connection wala video dekh sakte he
Sensors work on 5 V, so can it be connected with 60 ft long wire? As we need to install it in G+4 floor building.
Yes it will work.
wire jo tanki mein gaya hai usse koi khatra nehin to current shock ka?
Nahi. Mai khud ise use kar raha hu.nor aap company se confirm kar sakte he . Ya fir float sensor wala model le sakte he use bar bar change bhi nhi karna padta he
Thanks ager sump main pani nahi hoga to kya yeh kuch der chal ke bad automatic band ho jayega...
Nahi . Iske liye dual tank water level controller ata he
Isme flot switch connect kr sakte hai
Ha
👏🏼👌🏻 very practical video
bohot hi pasand aaya sir
Kya a manual mebhi auto off hoga?
What is the purpose of R1 in this mechanism? If the water goes below G1, it will start the motor, right?
Sir I have doubt . Can I contact you how ?
You can buy this controller online
Buy on amazon
amzn.to/2B1APag
amzn.to/2yCVzmW
Dual tank water level controller
Buy on amazon amzn.to/2Qub4oe
Very nice video. well explained.
Thanks....
Super 👍
Sir float switch Acha ya seansar Acha hai
Float switch
agar hum r1 wala wire nahi lagai to motor automatic on nahi hogi kya?
Sir Rpm Starter Lagana Complsary He Kya... Usake Bina Bhi water Level Controller Laga Skate he kya.
Is mai Green wire lagna zaroori hai kya?
Ha
Esme ketna ampirior ka relay ata hai
Thank u much sir ❤️❤️❤️❤️🙏🏻🙏🏻🙏🏻
Most welcome
Hello
Can we use this IT80WLC for submersible pump with starter?
How to do the connection for that?
Thanks
Watch this video ruclips.net/video/q9b-OZLyq2o/видео.html
@@SandeepAgarmorTutorial thanks. I have connected the IT80WLC and it works with submersible pump but seems the censor is not powerful enough to force the pump to push the water up-to 3rd Floor.
Is there a way to boost the censor as usually with starter water easily travels until that height but now with censor it is only able to push the water until first floor and water isn't reaching the tank.
How much current capacity. How much price. In maharashtra avaiable
@Sandeep Agarmor Tutorial In this video only you said that IT80WLC can be connected with starter motor. In amazon site somebody replied it cannot be connected with starter motors. Is it true?
Can we use this in submersible
Watch this video ruclips.net/video/q9b-OZLyq2o/видео.html
Hi sr output connection kase krange starter ke sath starter ka output N,P dono ka wire nikal ke kit me laga dena hai ya Starter ka N,P me v connection wire rahega aur again us me se 2 wire nikal ke kit ka N,P me connection kerna h
kon sa starter he
@@SandeepAgarmorTutorial crompton grips digital
Submersible wala he kya jisme Stop or start ke liye different switch rehte he
@@SandeepAgarmorTutorial Ha ji
Supply (N,P) Moter ( R,Y,B)
motor ko manual mode pe chalu kr ke auto mode pe switch kr de to tank full hone per band ho jeagi kya motor ... kyuki motor tavhi on hogi na tvh water level end mein hoga otherwise on he nai hogi islie pucha....
and alarm bolaega kya full hone per ??
AAP is controller me aisa nahi kar sakte he . isi me dusra model ata he. isme alarm nahi he. Dusre controller ka video dekhe ruclips.net/video/ylMHnFe9xBw/видео.html
@@SandeepAgarmorTutorial okies ty
Sir bohot badhiya samajaya
Thanks
Mains se controller me jayega ya mains se starter. Aapne confuse kar diya
Sir side m jo submersible pump ka starter hai usk btao n kese viring karna hai
ruclips.net/video/q9b-OZLyq2o/видео.html
is it better practce to start the motor directly with the controller without STARTER..?
No
Hamare yahan, paani ki fixed timing nahi hai. agar isko automatic pe rakha jaaye to paani aate hi apne aap on ho jaayega ?
watch this video ruclips.net/video/ylMHnFe9xBw/видео.html
you will have to connect this device instead of sensors to water pipeline. for connection whatsapp me on 9406851136
amzn.to/36txjmJ
Manual mode me g1 se pani upar he or full hone ke bad automatically bandh hoga???
Nahi
There is another model on which you can start motor in auto mode manually and stops automatically
@@SandeepAgarmorTutorial which model
Sar mera motar 0.5 hp ka he konsa use karana padega
Niche wala pani me duba hua rahta hai ki pani see halka upper rakhte hai sir plz bata dijiye ga sir
Niche wala to hamesha pani me duba rahega
Its nice video shooting and editing but need to advice you something small but important points.
1. Have to advise THREE way TOP instead. In Two way N & P can be change any time.
2. While fixing sensors FIRST you have to fix inner terminal instead. So you can identify your connection done properly or not and no chance to lose connection also.
Bro.. every thing is fine..but is there any earthing or shocking issues when we use the water from the tap
No. I am using it
Very informative channel. 😊
Thanks for supporting.
Sir starter ka process btao ki starter se apne aap chl jayega ya on Krna pdega
Agar on off ek hi switch se hota he to ye automatic motor on off kar dega. Or agar on ka or off ka switch alag alag he to iske liye dusra model he . Is video ko dekhe
ruclips.net/video/q9b-OZLyq2o/видео.html
Agar motor ko he on aur off karna control karna ho jab paani ki supply aye aur jaye ....uske liye kya karna hai?
Uh ul c auto starter pr likha hai esme kaun sa wire tanki ke sabse upar rahega aur kaun sa bitch me kaun sa sabse niche rahega
Pls Sir,can this wlc used in a steam generator to control the heating element (switch the element off)when the boiler is running out of water.
Please contact customer support for Better understanding of the product
Product knha se purchase karein??
Bhai sukreya
Sir phir jo hamare paas bara pump starter already hai uska kya function rahe jaega?plz explain
Is video ko dekhe ruclips.net/video/q9b-OZLyq2o/видео.html
Hi Sandeep, I have this controller. The motor on LED switches off after a few seconds though the pump keeps on running. Is this normal?
No. Motor on led should glow when motor is on.
@@SandeepAgarmorTutorial Okay. Then there must be issue with the controller. I will contact the company
Yes.
सर price kitana हैं
For G1 sensor, suppose the water level crosses the G1 matk and there was a power cut, then will the motor start after power is back?
Yes.
This is the problem
Hello sir.
I need your help.
In this model IT80WLC.
We can used in sumersible motor.
With single phase control panel starter
You can use it as semi-automatic. You will have to start motor manually and the starter will stop it automatically as soon as tank full. Their is another model for submersible pump which have starter with running and starting capacitor.
@@SandeepAgarmorTutorial thanks sir.
I can used this model .
But for starting it is manually.
And motor will stop automatically.
With sensor put on the tank.
am I right sir
@@SandeepAgarmorTutorial how to install IT80WLC mai buy kar chuka hu ab fit karna hi padega 1 hp ka submersible pump hai aur green red wala on off switch hai
Output wire of wlc will be input wire of your submersible starter
@@SandeepAgarmorTutorial So its work only auto off am i right
Motor not starting when sensors dipped in water,
When sensors are directly connected motor starts? Whats the problem?
Very nice video. Very well explained. But I few doubts.
Our building is two storey and the tank is on the second floor level and it's a cement constructed tank and capacity is catered for 2 houses.
Now the wires will go all the way from ground floor to the third floor level so much of wiring is to be done. Isn't it? Is my understanding correct?
And these wires must cater to the weather also.
Next once u place them, we can't close the tank using lids. Since ours is cemented the lid is also cemented. Then the wires tend to damage. So is there any solution for these things?
Pls clarify.
Yes you will have to use long three core wire upto the tank from starter. And you can drill hole in tank cemented slab which you used as tank cover. You can also install wireless water level controller instead of this wired water leel controller
watch this video
ruclips.net/video/4JJ7ObH3Bnc/видео.html
@@SandeepAgarmorTutorial Thank you so much for ur prompt response.
Out put ko stater se conectarte karne Per. Stater ka switch swath on ho jayega
Excellent 👌👌 sir....
Current lagdaina bro pani chalako bela
Bhai kya ye submersible borewell pump starter panel mein use kar sakte hai? Is mein dry run protection hai kya? Pls reply?
aap yahhvideo dekhe ruclips.net/video/q9b-OZLyq2o/видео.html
isme dry run protection nahi he
Hello sir
सर अगर पानी मे हम सेंसर को डालते हैं तो पानी मे करेंट फैल सकता हैं न
no
Kon chotiya Bola sensar pani me dala jata h
Can we use this wlc for underground tank to protect from dry run.
Watch this video
ruclips.net/video/ylMHnFe9xBw/видео.html
3 tank mai 1 se kaam ho jayega
nahi
Can use this on bore well motor
If your borewell motor start and stop by same switch ,then yes you can use this upto 2hp motor, but If start and stop switch are different then you can't use this wlc, there is another model for that starters
Sir,
My overhead tank is at 100 ft hight I would like to use your IT180 wlc. Can your product work on same height if it possible then please tell me cctv cable wire work or not for both overhead tank as well as ground water tank.Also provide me cost and specification of 90m wire along with your very nice product. My tank captivity is 20000 lit.
Contact customer care of Imagine technologies +918000066255
Kya rate h sir ji iski
Nice information sir..
Thanks
Sandip sir... your video is very good and knowledgeable..I watched your every video..sir one question about this video..can you please let me know...senser ke liye telephone wire bhi use kar sakta hu. Jo ki 0.1 mm ka hota hai....????
1sqmm wire is recommended. Telephone wire is very thin there is a possibility that if wire will broken sensor will dip in the tank
yes
Sir sabhi water controler connection es tarhe se hota hai .... Please sir.
Nahi. Ye unke circuit par depend karta hai
सर जी आपने ये नही बताया की WLC का output statar मे कहाँ देंगे ? अगर statar मे direct देंगे तो statar मोटर को auto start नही करेगा , स्टार्ट करने के लिए start butan पुश कराना ही पड़ेगा ?
is video ko dekhe ruclips.net/video/q9b-OZLyq2o/видео.html
Sir agar gadde me se pani nikalne ke lie automatic jo baarish me bhar jata h to kya karna padega kese install kare
Is video ko dekhe ruclips.net/video/ylMHnFe9xBw/видео.html
@@SandeepAgarmorTutorial sir hamare basement me pani bhar jata h to esa controller chahie jo paani bharne pe motor chalu ho jae or khali hone pe band pls help
Plz give the explanation with starter.. How it works..
Watch this video ruclips.net/video/q9b-OZLyq2o/видео.html
Panel ka wiring ?
I have same product yet my tank gets overflowed,kindly explain
sir hamare basement me pani bhar jata h to esa controller chahie jo paani bharne pe motor chalu ho jae or khali hone pe band pls help kare
Sir Floating switch and controller konse company ka best hai.
Mai Imagine technology ka 1 year se use kar raha hu or yaha accha chal raha he. Dusri company ka maine use nahi kiya hai
@@SandeepAgarmorTutorial sir iska dealership bhi mil sakta hai
Iska kya process hai aur ye kitna kamyab hai pl. Btane kasht kare
9771472953
Let assume that one of the sensor. say the top one which actually cuts supply off the motor doesnt work, how is it going to work, will it overflow ??
Yes
@@SandeepAgarmorTutorial so if sensor malfunctions it will overflow, isn't that risky
में आपका प्रोडक्ट WLC फ्लोट स्विच के साथ खरीदा है।में इस्टालेशन करना चाहता हु ।मेरी समस्या है के में WLC का out put पेनल के in put में देता हूं तो मुझे स्टार्टिंग कैपेसिटर का push बटन कुछ सेकंड के लिये दबाना होगा।नही तो मोटर स्टार्ट नही होगी इस समस्या का समाधान बताये।
Is video ko dekhe ruclips.net/video/q9b-OZLyq2o/видео.html
Sir Can I use this to run 2hp motor
Yes
@@SandeepAgarmorTutorial thank you sir
If water level goes down and it will switch on the motor will it also detect that water is coming or not from motor, because if I talk about water motor attached with normal government supply water connection which generally supply water two times in a day, will it detect that water is available in supply pipe to start motor or not ??
Do you store water in underground tank as well with overhead tank ?. you can whatsapp me on this number 9406851136
thanks define each portion beautifully keep continue.
your welcome
Shock nhi lagega kya is se ?????
Nahi
I have a problem with water level .there's no power and indicators. I'm searching to contact u for service..please guide me to service. It's just two months only I purchased
check description for numbers
I think it can be used for sump.
Motor should start when the sump is full with water
No this model can't be used. There is another model for this purpose
How is the product
sir starter contactor k sath is water controller ka connection kr sakte hain ???? reply sir plzzzz...
Watch this video ruclips.net/video/q9b-OZLyq2o/видео.html
kiya price hai
I really appreciated your work....if you don't mind i have one suggestions....
Please install middle indicator light as a yellow/blue light so it can easily get noticed when the water level on medium level because 2 light of same red color wouldn't easily register in your mind while you roaming in the house. (Just a phycological thing)
All the best
Sir ik sensor kitni voltage ka hai isse kisi ko shock to ni lagega
पर आप ने ये नही बताया कि MCB टाईप स्टार्टर मे WLC के output का कनेक्शन केसे करना है..
स्टार्टर के input मे देना है या स्टार्ट के NO element मे कही करना है..
मेरा स्टार्टर नये टाईप का है. उसमे सिर्फ़ दो स्विच है. एक mcb और एक स्टार्ट (green push button).
सिर्फ़ mcb ओन करने से भी submersible पम्प स्टर्ट हो जता है.
तो उसका connection समझाये..
Very very nice sir,,,,,,,,,,
Thanks